Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

							3FeaturesS
Station Programming
DescriptionAllows the proprietary telephone (PT) user to customize the
extension to their needs. The following programming items are
available:
For the PT (RX-T7220; RX-T7230; RX-T7235; RX-T7250; KX-
T7 130; RX-T7020; RX-T7030; RX-T7050)
Call Waiting Tone Type Assignment
Flexible CO Button Assignment
Full One-Touch Dialing Assignment
Intercom Alert Assignment
Preferred Line Assignment 
- Incoming / Outgoing
Station Programming Data Default Set
For digital PT (RX-T7220; RX-T7230; RX-T7235; RX-T7250) only,
Handset / Headset Selection
Live Call Screening Mode Set
Ringing Tone Selection for CO Buttons
For display PT (RX-T7230; RX-T7235; RX-T7 130; RX-T7030)
only,
Bilingual Display Selection
Initial Display Selection
Self-Extension Number Confirmation
For digital large display PT 
(RX-T7235) only,
Station Speed Dialing Number 
/ Name Assignment
For the operator and manager’s extension PT only,
Call Log Lock Control, Incoming
Live Call Screening Password Control
Remote Station Lock Control
Detailed information and programming instructions are described
in the User Manual, Station Programming.
ConditionsDuring Station Programming, the PT is considered to be in busy status.
Programming References
StationProgramming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User Manual
Operator / ManagerServiceFeatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . UserManual
Call Log Lock Control, Incoming
Live Call Screening Password Control
Remote Station Lock Control
Feature ReferencesNone
Operation References Not applicable.
Features3-141 
						

							S3Features
Station Programming Data Default Set
DescriptionAllows the proprietary telephone user to return all the following
items programmed on the telephone to default setting.Programming Items
Bilingual Display Selection
Call Waiting Tone 
Type Assignment
Full One-Touch Dialing Assignment
Handset 
/ Headset Selection
Initial Display Selection
Intercom Alert Assignment
Live Call Screening Mode Set
Preferred Line Assignment 
- Incoming
Preferred Line Assignment 
- OutgoingDefault
English Display
Tone 1
On
Handset
Caller ID
Tone Call
Hands-free
Ringing Line
Intercom Line
Station Programming is used to set or cancel these items at
individual telephones.
ConditionsNone
Programming References
Station Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .User Manual
Station Programming Data Default Set
Feature ReferencesSection 3, Features
Station 
Programming
Operation References Not applicable.
3- 142Features 
						

							Features
Station Speed Dialing
DescriptionAllows an extension user to store frequently dialed numbers in
order to place a call with abbreviated dialing. It is performed by
dialing the feature number and a speed dial number from 0 through
9. Up to 10 numbers can be stored in each telephone.
Conditionsl Station Speed Dialing can be followed by manual dialing to supplement
the dialed digits.
l You may make a call with One-Touch Dialing button, instead of Station
Speed Dialing.
l The standard telephone may be replaced with a proprietary telephone
(PT) temporarily to store one-touch dialing into memory. The Function
Buttons 
Fl through FlO correspond to speed dial numbers as follows:
Fl - 0F6 - 5
F2-1F7-6F3 
- 2F8 - 7
F4 
- 3F9-8F5 
- 4FlO-9
Programming References
Section 4, System Programming
[lOOI Flexible Numbering, Station speed dialing, Station speed dialing
programming
Feature ReferencesSection 3, Features
One-Touch Dialing
Operation ReferencesDPT Features, Standard Telephone Features-User 
MantidStation Speed Dialing
Features3-143 
						

							S
System Data Default Set
3Features
DescriptionThis system permits re-initialization of system-programmed data.
If all the programmed data is cleared, the system will restart with
the default setting.
ConditionsThe default setting for each programming item is listed in Section 5.2,
“Default Values”.
Programming References
Section 4, System Programming
[900] System Data Clear
Feature ReferencesNone
Operation ReferencesSection 2, Installation
2.9 System Data Clear3-144Features 
						

							3FeaturesS
System Programming with Proprietary Telephone
DescriptionThis system can be programmed with a proprietary telephone (PT).
Proprietary telephones available for System Programming are: 
KX-T7235; KX-T7230; KX-T7 130; and 
a-T7030 (Display
Proprietary Telephones).
Two extensions are allowed to perform System Programming. The
available extensions are:
(1) An extension that is connected to jack 1.
(2) An extension that is assigned as a manager.
For more information and programming instructions, refer to
Section 4, “System Programming”.
Conditionsl During System Programming the system operates normally.
l During System Programming the extension is considered to be busy.
l The display on the PT permits interactive programming.
l Access to System Programming is allowed only one at a time.
l To access system administration, a valid password must be entered.
The password is factory-programmed and 
can be changed.
Programming References
Section 4, System Programming
[006] Operator / Manager Extension Assignment
[ 1071 System Password
Feature ReferencesNone
Operation References Not applicable.Features
3-145 
						

							SFeatures.,
System Speed Dialing
DescriptionThis feature supports 100 abbreviated dial numbers that are
available to all users. A system speed dial number is dialed out by
pressing the 
AUTO button and a 2-digit code (00 through 99). It is
possible to store one hundred 24-digit telephone numbers per
system (maximum).
Conditions. Overriding Toll Restriction for System Speed Dialing can be activated
or deactivated by system programming.
@?or proprietary telephone users only]
l Speed Dialing, One-Touch Dialing, manual dialing, Last Number
Redial and Saved Number Redial can 
bc used in combinations.
For standard telephone users only]
l If a stored feature number includes “ * ” or “#“, rotary single line
telephones cannot use it.
Programming References
Section 4, System Programming
[OOl] System Speed Dialing Number Set
[002] System Speed Dialing Name Set
[ 
1001 Flexible Numbering, System speed dialing
[300] IRS Override for System Speed Dialing
Feature ReferencesSection 3, Features
Toll Restriction Override for System Speed Dialing
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
System Speed Dialing3-146
Features 
						

							FeaturesS
System Working Report
DescriptionThe Digital Super Hybrid System automatically records the
system’s working status condition. A printer connected to the
Serial Interface (RS-232C) port can be used to print the recorded
data. The recorded data can be printed out by the operator or
manager.
Recorded contents are as follows:
1. Date of record
l The date and time when cleared
l The date and time when printed out
2. Incoming calls
l The number of incoming calls
l The number of answered incoming calls
l The ratio of answered calls to incoming calls
Number of answered calls
Number of incoming callsx 
100 (%)
l The average time from receipt of call to answer of the
incoming and answered calls
l The average talk duration of the answered calls
3. Outgoing calls
l The number of requested accesses
l The number of successful accesses
l The ratio of successful accesses to requested accesses
Number of successful accesses
Number of requested accessesx loo 
(%)
l The average duration of the dialed calls
These records can be deleted by the operator or manager and new
data will be recorded thereafter.
Conditionsl Connect a printer to the Serial Interface (RS-232C) connector to the
main unit.
l Referring and deleting the system working report can be done using a
serial interface.
Connection References
Section 2, Installation
2.3.9 Printer and PC Connection
Features3-147 
						

							SFeatures
Programming References
Section 4, System Programming
[ 1001 Flexible Numbering, System working report
[806] Serial Interface (RS-232C) Parameters
Feature ReferencesSection 3, Features
Station Message Detail Recording (SMDR)
Operation ReferencesOperator / Manager Service Features-User Manual
System Working Report
3- 148Features 
						

							3FeaturesTime-out, VariableT
DescriptionProvides timers to control various features or functions.
The following timers are programmable:System Timer Items
Range
Automatic Redial Interval Timenx lOs, n:3 - 120
Automatic Redial Repeated Times1 - 30 times
Call Forwarding - No Answer Time-Out1 - 12 rings
Call Park Recall Time
3 - 48 rings
DISA AA Wait Time1-5s
DISA Delayed Answer Time0 - 6 rings
Extension-to-Outside Call Duration Time1 
- 64 min
Hold Recall Time0-240s
Intercept Routing Time-Out
3 - 48 rings
Message Waiting Ring Interval Time0-64min
Outside Line Dial Starting Timenx 100 ms, n:O - 40
Outside-to-Outside Line Call Duration Time1 
- 64 min
Pickup Dialing Waiting Time1-5s
SMDR Duration Count Starting Time0-60s
Timed Reminder Alarm Ring Time30-240s
Toll Restriction First Digit Time-Out5-120s
Toll Restriction Inter-digit Time-Out5-30s
Transfer Recall Time0 - 48 ringsOutside Line Group Timer Items
Disconnect Time
Hookswitch Flash Time
1.5 / 4.0 s
Disable/80/96/ 112/
200/300/400/500/
Pause TimeOutside Line Timer Items
CPC Signal Detection Time
(Incoming)
ms
DTMF Digit TimeExtension Timer Items
Delayed Ringing Count
600/700/800/900/
lOOO/ llOO/ 1200ms
1.5 / 2.5 13.5 14.5 s
Disable 
/ 100 / 200 /
300/400/500/600
80/ 160 ms
Disable 
/ Immediate /
1/3/6rings/Noring
Features3-149 
						

							T3Features ,,,,,Voice Mail Integration Timer Items
DTMF Signal Duration
DTMF Signal Waiting Time
after VPS Answer
80 / 160 ms0.5 
/ 1.0 / 1.5 / 2.0 s
DTMF Signal Waiting Time
after VPS calls Extension0.5 
/ 1.0 / 1.5 / 2.0 s
Programming References
Section 4, System Programming
[200] Hold Recall Time
[201] Transfer Recall Time
[202] Call Forwarding - No Answer Time
[203] Intercept Time
[204] Pickup Dial Waiting Time
[205] Extension-to-Outside Line Call Duration Time
[206] Outside-to-Outside Line Call Duration Time
[207] First Digit Time
[208] Inter Digit Time
[209] Automatic Redial Repeat Times
[210] Automatic Redial Interval Time
[211] Dial Start Time
[212] Call Duration Count Start Time
[213] DISA Delayed Answer Time
[216] Message Waiting Ring Interval Time.
[2 171Timed Reminder Alarm Ring Time
[218] DISA AA Wait Time
[219] Call Park Recall Time
[404] DTMF Time
[405] CPC Signal Detection Incoming Set
[4 121 Pause Time
[413] Flash Time
[414] Disconnect Time
[603]-[604] DIL 1 :N Extension and Delayed Ringing - Day / Night
[990] System Additional Information, Fields (6) through (8)
Feature ReferencesNone
Operation References Not applicable.3-150Features