Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

							9904.10 Optional Programming
System Additional Information (contd.)
Explanation for Area 2 (contd)
SelectionDefault 1 ReferencesDescription
Determines the initial display of a digital
large display proprietary telephone 
(KX-
T7235) in Station Speed Dialing.
Determines the source of Music Source 1 for
Music on Hold and BGM. Internal music
source is not available for your system.
Field
(19)
(20)
0 : names
1: numbers0
Special Features
of the m-T7235
- Station Speed
Dialing
l Background
Music (BGM)
l Background
Music (BGM)
- External
l Music on Hold
10 : internal music
source
1 : external music
source
(21)Selects inter-digit pause for pulse dialing.00:630ms
01:830 ms
10: 1030ms
0 : normal
1 : distinctive
0 : 84-1000 ms
1:200-1OOOms
01None
(22)Selects intercom dial tone frequency.0None
(26)Selects the extension-hooking signal
detection time.1None
Explanation for Areas 3 and 4
Selection
0:odBl:-3dB
DefaultReferences
0
None
Description
This field is provided to assign PAD Switch
Control (volume control of received calls on
an outside line). This can be assigned per
outside line. The outside line numbers [I]
through [3] correspond to outside lines 1
through 3 respectively.
Prevents or allows a call originated by an AA
port of VPS to another AA port.
Prevents or allows sending pulse dialing
signals during an outside call.
Enables or disables the outside line pulse
feedback tone.
10 : prevent
1 : allow
Voice Mail
Integration
None
0 : prevent
1 : allow
1
None0 : disable
1 : enable
1
4- 146System Programming
. 
						

							.4.10 Optional Programming
System Additional Information (contd.)
990
Explanation for Area 5
Description
Selection1 Default 1References
(30)Enables or disables the automatic time0 : enable1Caller ID
adjustment by Caller ID information once a
1 : disable
day by the first call received after 3:OOAM.
(31)Have an option to restrict the DISA outside-0 : 10 times1Direct Inward
to-outside line extending time. 10 attempts
1 : no limitation
System Access
are allowed.
(DISA)
(32)Enables or disables retry by dialing “ x ‘*0 : disable1DISA
during DISA outside-to-outside line calling.1 : enable
(33)Selects the result when a call from DISA0:IRNA1DISA
arrives at a DND extension or a busy,1: busy tone is
extension which disabled Call Waiting.sent
(34)Sets the time the system waits for IRNA0 : immediately
1Outgoing
after the OGM.
1: after 10 seconds
Message (OGM)
(35)Selects the result when an outside call is0 : disable1Voice Mail
routed by Call Forwarding to a voice mail1 : enable
Integration
port which is in AA service mode. (For both
Inband and DFT Integration)
disable: AA service mode
enable : The mode will change to the VM
service mode and a Follow-On ID is
sent.
When the voice mail port is in VM service
mode, this program is not affected.
(36)Selects the result when an outside call is0 : enable1Voice Mail
routed to a voice mail port by RNA. (For1 : disableIntegration
both Inband and DFT Integration)
When the voice mail port is in VM service mode,
enable : VM service mode
disable: The mode will change to the AA
service mode. (Only when 
Inband)
When the voice mail port is in AA service mode;
enable : The mode will change to the VM
service mode and a Follow-On ID is
sent.
disable : AA service mode
(37)Selection of the OHCA or BSS function for
0 : BSS1Off-Hook Call
KX-‘I7235 telephones.1: OHCAAnnouncement(OHCA)
(38)Enables or disables dial tone 2 when an0 : disable1None
extension sets programmable extension
1: enable
features such as Call Waiting.
System Programming4-147 
						

							9904.10 Optional Programming
System Additional Information (contd)
Explanation for Area 5 (contd)
Field
(39)
(40)
(41)
(42)
(43)
WI
(45)
Description
Determines the result when pressing the
FLASH button during an outside call (When
Field 3=0).
Flash: Disconnects and accesses the same
outside line.
Selects the message waiting ring type: 3
quick rings or 2 normal rings, for standard
telenhones.
Terminate: Terminates the outside line and
accesses the intercom. It is
convenient to route the outside
call according to ARS if ARS is
active.
Selects the SMDR format for an incoming
call with Caller ID. The caller’s number
only or caller’s number and name is selected.
Enables or disables the SMDR printout for
RC (when an incoming call occurs) and AN
(when an incoming call is answered).
Selects the result when a call from DISA is
invalid.
Selects the result of pressing “0” (default);
calls operators 1 and 2 at the same time or
Operator 1 first and then Operator 2 if
Operator 1 is busy.
Enables or disables the SMDR printout when
the Timed Reminder starts and the alarm is
not answered.
Explanation for Area 6
Selection
0 : Terminate
1:Flash
0 :  +0: 
3timesby4Oms
caller no.
1 :  + caller no.
1: 2 times by
+ name
0 : enable
1 : disable
28Oms
0:IRNA
1: reorder tone is
sent
0:Operators 1 and
2 simultaneously
1:Operator 1 first
and then
Ooerator 2
0 : enable
1 : disable
Defaull
1
1
1
References
Flash
Message Waiting
Station Message
Detail Recording
(SMDR)
SMDR
None
Operator Call
Timed Reminder
Description1 Selection1 Default 1 References 1
(46)
I I
Programs whether or not the account code is0 : not printed out
printed out in the SMDR.
I1: printed out
1Account Code
EntryI
4-148System Programming
. 
						

							4.10 Optional Programming990
System Additional Information (contd)
SelectionlArea code: 01 (area 1) / 02 (area 2) / 03 (area 3) / 04 (area4)/
05 (area 5) / 06 (area 6)l
Field number : 1 through 46l
Selection: See “Selection” on pages 4- 144 through 4- 148.
DefaultSee “Default” shown above.
Programming1.Enter 990.
Display: 990 SYS ADD DATA
2.Press NEXT.
Display: Area NO?-+
3.Enter an area code (01 through 06).
Display example: 0010100011000001
4.Keep pressing e or + to move the cursor to the desired
field.
5.Enter your selection (0 or 1).
To change thecurrententry,press STORE andenterthe new
selection.
6.
7.
8.
To program another field, repeat steps 4 and 5.
Press STORE.
To program another area, press SELECT and the desired
ama code.
9.
10.Repeat steps 4 through 8.
Press END.‘_
ConditionsNone
Feature ReferencesSee “‘References” on pages 4-144 through 4- 148.I
.
System Programming4-149 
						

							9914.10 Optional Programming
COS Additional Zqformation
Description(1) Sets the number of digits allowed to dial out during an outside call
on a Class of Service (COS) basis.If an outside party hangs up and
the extension user tries to dial out still on the outside line, the
system will disconnect the line at the time the assigned digits are
dialed. This program can be added if the CPC Signal Detection is
not provided by the outside line.
The Field (1) shown below is used to enter your selection.
(2) Enables or disables Call Forwarding 
- Follow Me feature on a COS
basis.
The Field (2) below is used to enter your selection.
Display
example1111111111110000
L1 1
Field number(unused)(2)(1)
Selectionl COS number: 1 through 8, * (* =all COS)l
Field number : 1 or 2
l Selection for field (1):
0000: no limit / 0001: 1 digit / 0010: 2 digits / 0011: 3 digits /
0100: 4 digits / 0101: 5 digits / 0110: 6 digits / 0111: 7 digits /
10001 8 digits / 1001: 9 digits / 1010: 10 digits / 1011: 11 digits /
1100: 12 digits / 1101: 13 digits / 1110: 14 digits / 1111: 15 digitsl
Selection for field (2): 0 : disable / 1: enable
DefaultField 1: All COS - 00 / Field 2: All COS - 1
Programming1.Enter 991.
Display: 991 COS ADD DATA
2. PressNEXT.
Display: COS NO?+
3.Enter a COS number.
Display example: 1111111111110000
4.Keep pressing e or a to move the cursor to the desired
field.
.
4-150System Programming 
						

							4.10 Optional ProgrammingCOS Additional Information (contd.)
991
Conditions
Feature References
5.Enter your selection (0 or 1).
To change the current entry, press STORE and the new selection.
6.To program another field, repeat steps 4 and 5.7. Press STORE.
8.To program another COS, press SELECT and the desired
COS number.
9.Repeat steps 4 through 8.10. Press END.
None
Section 3, Features
Call Forwarding 1 Follow Me
Calling Party Control (CPC) Signal Detection
Class of Service (COS)
.
System Programming4-151 
						

							Section 5
List
This section lists the tone, ring tone and default values of
system programming.
. 
						

							51lTone / Ring Tone

Confirmation Tone 1
Confirmation Tone 2
Confirmation Tone 3
Confirmation Tone 4
Dial Tone 1
Dial Tone 2
Dial Tone 3
Dial Tone 4
Busy Tone
Reorder Tone
Ringback Tone 1
Ringback Tone 2
Do Not Disturb (DND)
Tone
Outside-to-Outside Line
Call Limit Warning Tone
.
5-2List 
						

							51lTone / Ring Tone

Hold Alarm
Call Waiting Tone 1
(outside/intercom)
Call Waiting Tone 2
(outside)
Call Waiting Tone 2
(intercom)

Outside Calls /
Outside Call Hold Recall
Intercom Calls 
/
Intercom Hold Recall
Doorphone Calls 
/
Timed Reminder
Callback Ringing(Camp-on Recall)
.
List5-3 
						

							52lDefault Values
CO 1 through 3, Others = Not Stored;
Ring tone type 2
[006]Operator / Manager ExtensionOperator l=Jack 1;
Assignment
Operator 2 and Manager=Unassigned
[OOS] Absent Messages1: Will Return Soon; 2: Gone Home;
3: At Ext %%; 4: Back at 
%%:%%;
5: Out Until 
%%/%%; 6: In a Meeting;
7 through 9: Not Stored
[009]Quick Dial Number SetNot Stored
System Programming
[ lOO]Flexible NumberingSee page 4-3 1 and 4-32.
[ 
1011Day / Night Service Switching Mode Manual
[ 1021Day / Night Service Starting TimeEvery Day of the Week - Day=9:00 am /
Night=500 pm
[ 1031Automatic Access Outside Line123
Assignment
[ 1051Account CodesNot Stored
[ 1061Station Hunting ?LpeAll Extension Groups=Disable
r 1071System Password1234
[108]Automatic Hold by CO / DSS Button DSS Button=Enable; CO Button=Disable
[ 1 lo]Caller ID Code SetNot Stored
r 1111Caller ID Name SetNot Stored
[113]VM Status DTMF SetRBT=l; BT=2; ROT=3; DND=4; Answer=S;
Disconnect=#@; Confil=9; FWD VM RBT=6;
FWD VM BT=7; FWD EXT RBT=8
[ 1141VM Command DTMF SetLV-MSG=H; GETMSG= * H; AA-SVC=#@;
VM-SVC=#6
[ 1161ROM Version DisplayNot Applicable
t [ 1171Voice Mail Number AssignmentNot Stored
tW31Voice Mail Extension NumberVM- 1=295; VM-2=296;
Assignment
VM-3=297; VM-4=298
t [ 1191.Voice Mail Extension GroupAll Voice Mail Numbers=EXG 1
Assignment
.
5-4Listf: Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System (one
that supports digital proprietary telephone integration; e.g. KX-TVS 100).