Home > Panasonic > Router > Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual

Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Tone 2
    •
    When there are messages that
    have 
    previously been listened to
    and no new messages recorded
    by the SVM feature
    • When any of the following
    features are set:
    •Absent Message
    • Background Music
    • Call Forwarding
    • Call Pickup Deny
    • Call Waiting
    • Do Not Disturb
    • Extension Dial Lock
    • Executive Busy Override
    Deny
    • Hot Line
    • Timed Reminder Tone 3
    •
    After pressing TRANSFER or
    Recall/hookswitch to hold a call
    temporarily (e.g., Call Splitting)
    • When 
    
    the recording space of the
    Simplified Voice Message
    feature becomes almost full
    • While a called PS is being
    searched
    • When Account Code Entry is
    performed
    • When answering a Timed
    Reminder call with no message
    • When answering an external
    sensor call Tone 4
    Message waiting indication was
    received.
    When you make calls
    Busy Tone Reorder Tone
    The CO line you tried to seize is not
    assigned or denied.
    Ringback Tones
     Document Version  2013-05  
    Operating Manual 221 4.3.1 Tone1 s 1 s 1 s 1 s 1 s  
    						
    							Tone 1
    Tone 2
    Do Not Disturb (DND) Tone
    The dialed extension is refusing
    incoming calls.
    While off-hook
    Indication Tones  
    Tone 1
    Call waiting tone Tone 2
    A call is on hold longer than the
    specified time
    When talking to an outside party
    Warning Tone
    This tone is sent 15, 10 and 5
    seconds 
    before the specified time for
    disconnection. When setting the features or programming
    Confirmation Tones  
    Tone 1
    • The feature setting was set
    successfully.
    • A 
    
    call is received in Voice-calling
    mode. Tone 2
    •
    Before 
    
    receiving a page through
    an external speaker
    • A call is received in Hands-free
    mode. 222 Operating Manual
    Document Version  2013-05  4.3.1 Tone1 s 1 s 1 s 15 s 15 s 1 s 1 s 1 s  
    						
    							Tone 3
    •
    Before the following features
    activate:
    •Retrieving a held call
    • Picking up another call
    • Paging/Answering a paging
    announcement
    • Answering 
    the call through a
    speaker
    • When a conversation is
    established with the extension in
    the following modes:
    •Hands-free Answerback
    mode
    • Voice-calling mode
    • When making a call to or from a
    doorphone. Tone 4
    Establishing 
    
    or leaving a conference Tone 5
    A call has been put on hold.
    Document Version  2013-05  
    Operating Manual 223 4.3.1 Tone1 s 1 s 1 s  
    						
    							4.4  Revision History
    4.4.1  KX-NCP500/KX-NCP1000
     PBMPR Software File Version
    2.02xx
    New Contents •Feature Highlights
    –CA Call Accounting
    • 1.5  Using a KX-HGT100 SIP Extension
    –1.5.1  Operation List
    – 1.5.2  Speed Dialing
    • 1.6.1  Cellular Phone Features
    Changed Contents •1.1.1  Before Operating the Telephones  Connection Example
    • 1.3.19  DISA (Direct Inward System Access)
    –Walking COS via DISA
    • 1.3.11  Call Transfer  Transferring to an Extension in the PBX
    • 1.5.3  Private Network Features—Displaying Your Telephone Number on the Called Party
    
    ’s Telephone
    4.4.2  KX-NCP500/KX-NCP1000 PBMPR Software File Version
    4.1xxx
    New Contents •1.3.17  Conference Group Call
    Changed Contents •1.3.53  Private Network Features—CLIP (Calling Line Identification Presentation)
    • 1.3.72  Voice Mail Features—Voice Mail Integration
    –VM Transfer Key Operation
    • 4.2.1  Feature Number Table
    –Conference Group Call
    4.4.3  KX-NCP500/KX-NCP1000 PBMPR Software File Version
    5.0xxx
    New Contents •1.3.11  Call Transfer  Transferring to an Outside Party Using the SIP Service
    224 Operating Manual
    Document Version  2013-05  4.4.3 KX-NCP500/KX-NCP1000 PBMPR Software File Version 5.0xxx    
    						
    							Changed Contents
    •1.3.17  Conference Group Call
    Push-to-Talk for PS and PT users
    • 1.3.68  Verification Code Entry
    • 1.3.76  Walking Extension, Enhanced
    4.4.4  KX-NCP500/KX-NCP1000
     PBMPR Software File Version
    6.0xxx
    New Contents •1.3.7  Call Monitor
    • 1.3.9  Call Pickup
    • 1.3.24  Executive Busy Override
    4.4.5  KX-NCP500/KX-NCP1000 PBMPR Software File Version
    7.xxxx
    Changed Contents •1.1.1  Before Operating the Telephones
    • 1.3.17  Conference Group Call
    • 1.3.33  Headset Operation
    • 1.3.59  Redial, Last Number
    • 1.3.61  Self Labeling (KX-NT366/KX-NT560)
    • 1.3.75  Walking Extension
    • 1.4.1  Call Log, Incoming
    • 1.4.2  Call Log, Outgoing
    • 1.4.3  Directories
    • 1.4.4  System Feature Access
    • 1.6.1  Cellular Phone Features  Transferring to a Private Network (TIE Line Access)
     Transferring to an Outside Phone Number
    • 3.1.2  Personal Programming
    • 3.1.4  Customizing the Buttons
    • 3.3.1  Programming Information
    • 4.1.1  Troubleshooting
    4.4.6 
    
     KX-TDE100/KX-TDE200 PMMPR Software File Version 2.01xx
    New Contents •1.5.3  Private Network Features—Displaying Your Telephone Number on the Called Party ’s TelephoneDocument Version  2013-05  
    Operating Manual 2254.4.6 KX-TDE100/KX-TDE200 PMMPR Software File Version 2.01xx   
    						
    							4.4.7  KX-TDE100/KX-TDE200 
    PMMPR Software File Version 3.0xxx
    New Contents •Feature Highlights
    –Communication Assistant
    • 1.1.1  Before Operating the Telephones
    –Cleaned-up
    • 1.3.34  HOSPITALITY FEATURES
    –Cleaned-up
    • 1.3.60  Room Status Control
    –Cleaned-up
    • 1.5  Using a KX-HGT100 SIP Extension
    –1.5.1  Operation List
    – 1.5.2  Speed Dialing
    • 1.6  Cellular Phone Features
    • 3.1.4  Customizing the Buttons
    –Cleaned-up
    Changed Contents •1.1.1  Before Operating the Telephones  Connection Example
    • 1.3.19  DISA (Direct Inward System Access)
    –Walking COS via DISA
    • 1.3.11  Call Transfer  Transferring to an Extension in the PBX
    • 1.3.53  Private Network Features—CLIP (Calling Line Identification Presentation)
    • 1.5.3  Private Network Features—Displaying Your Telephone Number on the Called Party
    
    ’s Telephone
    4.4.8  KX-TDE100/KX-TDE200 PMMPR Software File Version 4.1xxx
    New Contents •1.3.17  Conference Group Call
    Changed Contents •1.3.72  Voice Mail Features—Voice Mail Integration
    –VM Transfer Key Operation
    • 4.2.1  Feature Number Table
    –Conference Group Call
    4.4.9  KX-TDE100/KX-TDE200 PMMPR Software File Version 5.0xxx
    New Contents •1.3.11  Call Transfer  Transferring to an Outside Party Using the SIP Service
    226 Operating Manual
    Document Version  2013-05  4.4.9 KX-TDE100/KX-TDE200 PMMPR Software File Version 5.0xxx    
    						
    							Changed Contents
    •1.3.17  Conference Group Call
    Push-to-Talk for PS and PT users
    • 1.3.68  Verification Code Entry
    • 1.3.76  Walking Extension, Enhanced
    4.4.10  KX-TDE100/KX-TDE200
     PMMPR Software File Version
    6.0xxx
    New Contents •1.3.7  Call Monitor
    • 1.3.9  Call Pickup
    • 1.3.24  Executive Busy Override
    4.4.11  KX-TDE100/KX-TDE200 PMMPR Software File Version
    7.xxxx
    Changed Contents •1.1.1  Before Operating the Telephones
    • 1.3.17  Conference Group Call
    • 1.3.33  Headset Operation
    • 1.3.59  Redial, Last Number
    • 1.3.61  Self Labeling (KX-NT366/KX-NT560)
    • 1.3.75  Walking Extension
    • 1.4.1  Call Log, Incoming
    • 1.4.2  Call Log, Outgoing
    • 1.4.3  Directories
    • 1.4.4  System Feature Access
    • 1.6.1  Cellular Phone Features  Transferring to a Private Network (TIE Line Access)
     Transferring to an Outside Phone Number
    • 3.1.2  Personal Programming
    • 3.1.4  Customizing the Buttons
    • 3.3.1  Programming Information
    • 4.1.1  Troubleshooting
    4.4.12  KX-TDE600 PGMPR Software File Version 3.0xxx
    New Contents •Feature Highlights
    –Communication Assistant
    • 1.5  Using a KX-HGT100 SIP Extension
    –1.5.1  Operation List
    – 1.5.2  Speed Dialing
    • 1.6  Cellular Phone Features Document Version  2013-05  
    Operating Manual 2274.4.12 KX-TDE600 PGMPR Software File Version 3.0xxx   
    						
    							Changed Contents
    •1.1.1  Before Operating the Telephones  Connection Example
    • 1.3.19  DISA (Direct Inward System Access)
    –Walking COS via DISA
    • 1.3.11  Call Transfer  Transferring to an Extension in the PBX
    • 1.3.53  Private Network Features—CLIP (Calling Line Identification Presentation)
    • 1.5.3  Private Network Features—Displaying Your Telephone Number on the Called Party
    ’s Telephone
    4.4.13  KX-TDE600 PGMPR Software File Version 4.1xxx
    New Contents •1.3.17  Conference Group Call
    Changed Contents •1.3.72  Voice Mail Features—Voice Mail Integration
    –VM Transfer Key Operation
    • 4.2.1  Feature Number Table
    –Conference Group Call
    4.4.14  KX-TDE600 PGMPR Software File Version 5.0xxx
    New Contents •1.3.11  Call Transfer  Transferring to an Outside Party Using the SIP Service
    Changed Contents •1.3.17  Conference Group Call
    Push-to-Talk for PS and PT users
    • 1.3.68  Verification Code Entry
    • 1.3.76  Walking Extension, Enhanced
    4.4.15  KX-TDE600 PGMPR Software File Version 6.0xxx
    New Contents •1.3.7  Call Monitor
    • 1.3.9  Call Pickup
    • 1.3.24  Executive Busy Override 228 Operating Manual
    Document Version  2013-05  4.4.15 KX-TDE600 PGMPR Software File Version 6.0xxx    
    						
    							4.4.16  KX-TDE600 PGMPR Software File Version 7.xxxx
    Changed Contents
    •1.1.1  Before Operating the Telephones
    • 1.3.17  Conference Group Call
    • 1.3.33  Headset Operation
    • 1.3.59  Redial, Last Number
    • 1.3.61  Self Labeling (
    KX-NT366/KX-NT560)
    • 1.3.75  Walking Extension
    • 1.4.1  Call Log, Incoming
    • 1.4.2  Call Log, Outgoing
    • 1.4.3  Directories
    • 1.4.4  System Feature Access
    • 1.6.1  Cellular Phone Features  Transferring to a Private Network (TIE Line Access)
     Transferring to an Outside Phone Number
    • 3.1.2  Personal Programming
    • 3.1.4  Customizing the Buttons
    • 3.3.1  Programming Information
    • 4.1.1  Troubleshooting Document Version  2013-05  
    Operating Manual 2294.4.16 KX-TDE600 PGMPR Software File Version 7.xxxx   
    						
    							230 Operating Manual
    Document Version  2013-05  4.4.16 KX-TDE600 PGMPR Software File Version 7.xxxx 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual