Oce ColorWave 300 User Manual

							Settings group: 'Stamp'
#
Function
Settings values
Setting
Copy with a stamp'None'
'Date/time'
'Confidential'
'Draft'
'Copy'
'For review'
'Stamp6'

 ...
 'Stamp12'
'Stamp'
'The position of the stamp inside the leg-
end.''Top'
'Middle'
'Bottom'
'Position'
'The 
size of the stamp.''Small'
'Large'
'Size'
'The 
color of the stamp.''Light gray'
'Gray'
'Dark gray'
'Black' 'Color'
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer 191Available settings for copy jobs
Downloaded From ManualsPrinter.com Manuals 
						

							Settings group: 'Drawing method'
#
Function
Settings values
Setting
Defines which drawing method is used
for
 the legend position. 'DIN'
'Afnor'
'Ericsson'
'Method'
'Defines 
whether the legend is located at
the
 top (leading) or the bottom (trailing).' 'Top'
'Bottom'
'Legend'
Settings group: 'Light and mirror' #
Function
Settings values
Setting
Increase the value for lighter prints; 
de-
crease for darker prints. -5 to +5
'Lighter/dark-
er'
'When 'on', the image is mirrored along
the

 vertical axis (the 
media transport di-
rection).' 'On'
'Off''Mirror'
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer192Available settings for copy jobs
Downloaded From ManualsPrinter.com Manuals 
						

							Settings group: 'Sort'
#
Function
Settings values
Setting
If you want to copy multiple sheets, you
can 
indicate how the copied sheets must
be sorted. 'By page'
'By

 set' 'Sort'
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer 193Available settings for copy jobs
Downloaded From ManualsPrinter.com Manuals 
						

							Make multiple sets of copies
Introduction You can 
use the 'Create set' option to make multiple sets of copies.
Before
 you begin If you must enter the same value for a setting very often, you can set this value as the de-
fault value for that 
setting in the Océ Express WebTools.
After
 you 
press the start key, the user panel always shows the job number and status of
the
 job. A copy job appears temporarily in the 'Jobs - Queue' section of the Océ Express
WebTools, 
a scan job appears in the Smart Inbox 'Scans'.
How
 to make multiple sets of copies sorted by set 1. Feed 
the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner. The 
'Copy' tab is automatically activated on the user panel.
2. Open
 the 'Copy' tab 
with the confirmation button above the scroll wheel.
3. Define
 the job settings. ■
Open a template with 
the confirmation button.
The 
'Create set' option appears at the lower left corner of the screen.
■ Select
 'Create set' with 
the lower left soft key.
The
 
'Close set' option appears at the lower left corner of the screen.
■ Scroll
 
to 'Sort', define 'By set' and confirm with the with confirmation button. This
setting
 is disabled after you 
press the start button for the first time.
■ Press'OK'.
■ Change the settings for your 
first original if necessary.
■ Define the number of copies 
and press the start button. You can not change the number of copies after you press the start button for the first
time.
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer194Make multiple sets
 of copies
Downloaded From ManualsPrinter.com Manuals 
						

							■
Feed the next original, define the settings for this original if necessary and press the
start
 
button.
You can 
use the lower right soft key to return to the default settings of your copy
template.
Repeat this step until 
all originals are fed.
4. Select 'Close set' with 
the lower left soft key.
How
 to make multiple sets of copies sorted by page 1. Feed 
the first original face up.
The
 
scanner takes the original.
2. Open
 the 'Copy' tab 
with the confirmation button above the scroll wheel.
3. Define
 the job settings. ■
Open a template with 
the confirmation button.
The 
'Create set' option appears at the lower left corner of the screen.
■ Select
 'Create set' with 
the lower left soft key.
The
 
'Close set' option appears at the lower left corner of the screen.
■ Scroll
 to 'Sort', define 'By page' and confirm with the with confirmation button. This
setting is disabled after you 
press the start button for the first time.
■ Press'OK'.
■ Change the settings for your 
first original if necessary.
■ Define the number of copies 
and press the start button.
You can not change the number of copies after you press the start button for the first
time.
■ Feed 
the next original, define the settings for this original if necessary and press the
start
 
button.
You can 
use the lower right soft key to return to the default settings of your copy
template.
Repeat this step until 
all originals are fed.
4. Select 'Close set' with 
the lower left soft key.
Result The 
Océ ColorWave 300 copies a set of originals sorted by set or by page.
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer 195Make multiple sets
 of copies
Downloaded From ManualsPrinter.com Manuals 
						

							Make a copy with a stamp
Introduction A stamp 
is a pre-defined text you can set on every copy.
Before
 you begin If you must enter the same value for a setting very often, you can set this value as the de-
fault value for that 
setting in the Océ Express WebTools.
After
 you 
press the start key, the user panel always shows the job number and status of
the
 job. A copy job appears temporarily in the 'Jobs - Queue' section of the Océ Express
WebTools, 
a scan job appears in the Smart Inbox 'Scans'.
How
 to make a copy with a stamp 1. Feed

 
the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner. The 
'Copy' tab is automatically activated on the user panel.
2. Open
 the 'Copy' tab 
with the confirmation button above the scroll wheel.
3. Define
 the job settings. ■
Open a template with 
the confirmation button.
■ Scroll 
to 'Stamp' and open this setting with the confirmation button.
■ Scroll 
to 'Stamp', select a stamp with the scroll wheel and confirm.
■ Scroll
 
to 'Position', select the correct position with the scroll wheel and confirm.
■ Scroll
 
to 'Size', select the correct size with the scroll wheel and confirm.
■ Scroll
 
to 'Color', select the correct color with the scroll wheel and confirm.
4. Define
 the number of copies 
and press the start button.
Result The 
copy contains the selected stamp.
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer196Make a
 copy with a stamp
Downloaded From ManualsPrinter.com Manuals 
						

							Scale to another media size
Introduction
You can use the 'Scale' setting to copy to a larger or smaller media format. Use one of the
following methods to scale a copy.
■ Select
 another media format with 
the 'To fit' setting.
■ Adjust
 a value in 
terms of percentage with the 'Custom' setting.
You
 can 
adjust a value between 25 and 400%. A value lower than 100% reduces the
copy,
 a value greater than 100%
 enlarges the copy.
Before
 you begin If you must enter the same value for a setting very often, you can set this value as the de-
fault value for that 
setting in the Océ Express WebTools.
After
 you 
press the start key, the user panel always shows the job number and status of
the
 job. A copy job appears temporarily in the 'Jobs - Queue' section of the Océ Express
WebTools, 
a scan job appears in the Smart Inbox 'Scans'.
How
 to copy to another media size 1. Feed 
the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner. The 
'Copy' tab is automatically activated on the user panel.
2. Open
 the 'Copy' tab 
with the confirmation button above the scroll wheel.
3. Define
 the job settings. ■
Open a template with 
the confirmation button.
■ Scroll 
to 'Scale' and open this setting with the confirmation button.
■ Scroll 
to 'To fit', select a standard media format from the media series you use and
confirm.
4. Define the number of copies 
and press the start button.
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer 197Scale to another media size
Downloaded From ManualsPrinter.com Manuals 
						

							Result
The Océ ColorWave 300 copies to another media size.
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer198Scale to another media size
Downloaded From ManualsPrinter.com Manuals 
						

							Make a copy and add a strip
Introduction You can 
use a strip to file a drawing.
Use
 
'Sheet size' to copy an original without a strip and add a strip to the copy. You can
add
 a strip 
at the top or bottom side of a copy.
Use
 'Erase margins' to copy an original with a strip and remove the strip from the copy.
You can erase a margin from the top, the bottom, the left or the right side of the original.
Before you begin If you must enter the same value for a setting very often, you can set this value as the de-
fault value for that 
setting in the Océ Express WebTools.
After
 you 
press the start key, the user panel always shows the job number and status of
the
 job. A copy job appears temporarily in the 'Jobs - Queue' section of the Océ Express
WebTools, 
a scan job appears in the Smart Inbox 'Scans'.
How
 to make a copy and add a strip 1. Feed

 
the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner. The 
'Copy' tab is automatically activated on the user panel.
2. Open
 the 'Copy' tab 
with the confirmation button above the scroll wheel.
3. Define
 the job settings. #
The 
'Bottom' strip
The
 'Top' strip
■ Open
 a template with 
the confirmation button.
■ Scroll 
to 'Sheet size' and open this setting with the confirmation button.
■ Scroll 
to 'Top' or 'Bottom', define the value with the scroll wheel or numeric keys
and
 confirm.
4. Define the number of copies 
and press the start button.
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer 199Make a
 copy and add a strip
Downloaded From ManualsPrinter.com Manuals 
						

							Result
The Océ ColorWave 300 adds a trailing or leading strip to the copy.
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer200Make a
 copy and add a strip
Downloaded From ManualsPrinter.com Manuals