Lucent Technologies Centrevu Supervisor Version 8 Guide

							   CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Local PC
Installation Procedures2-7
12. The Type of Location dialog box appears. 
13. Select Install to Local PC to install CentreVu Supervisor to a stand-alone 
client PC or on the client’s own Local Area Network (LAN) drive.
14. If the setup program finds a previous installation of Supervisor 
Version 8 or Version 6, the Previous Version Found dialog box appears. 
Click OK to continue with the installation. 
						

							   CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Local PC
Installation Procedures2-8
15. Select Next. Then select one of the following, depending on which dialog 
appears:
lIf the Replace CentreVu Supervisor 5.0 dialog box appears, it means 
that the setup program did not find a previous installation of 
Supervisor Version 8 or Version 6, but it found an installation of 
Supervisor Version 5. Go to Step 16
.
lIf the Replace CentreVu Supervisor 1.0 dialog box appears, it means 
that the setup program did not find a previous installation of 
Supervisor Version 8 or Version 6, but it found an installation of 
Supervisor Version 1. Go to Step 19
. (Either Supervisor Version 5 or 
Version 1 could exist, but not both.)
lIf the Select Location dialog box appears, it means that the setup 
program did not find any previous installation of Supervisor. Go to 
Step 22
.
16. The Replace CentreVu Supervisor 5.0 dialog box appears.
17. Select one of the following:
lReplace Existing—the setup program will delete the existing 
installation of Supervisor Version 5 and install Supervisor Version 8 in 
its place. 
						

							   CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Local PC
Installation Procedures2-9
lKeep Existing—the setup program will keep the existing installation 
of Supervisor and prompt to install Supervisor Version 8 in a different 
folder.
NOTE:
If you decide to keep the previous installation of Supervisor 
Version 5, you can uninstall it later using the uninstall executable file on 
the Supervisor CD-ROM. This file is named removeV5.exe
.
18. Select N
ext. 
19. The Replace CentreVu Supervisor 1.0 dialog box appears.
20. Select one of the following:
lReplace Existing—the setup program will delete the existing 
installation of Supervisor Version 1 and install Supervisor Version 8 in 
its place.
lKeep Existing—the setup program will keep the existing installation 
of Supervisor and prompt to install Supervisor Version 8 in a different 
folder. 
						

							   CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Local PC
Installation Procedures2-10
NOTE:
If you decide to keep the previous installation of Supervisor 
Version 1, you can uninstall it later using the uninstall executable file on 
the Supervisor CD-ROM. This file is named removeV1.exe
.
21. Select N
ext.
22. The Select Location dialog box appears. If you are replacing the existing 
version of Supervisor, the Browse button will be disabled.
23. Assure that you have enough disk space to install the application to the 
specified drive.
NOTE:
The information on the bottom of the dialog box indicates the Current Free 
Disk Space and the Free Disk Space After Install. 
24. Choose one of the following:
lIf you want to install the Supervisor files in the default installation 
path displayed, go to Step 28
. 
lIf you want to install the CentreVuSupervisor files in a different drive 
or folder, go to Step 25
. 
						

							   CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Local PC
Installation Procedures2-11
25. Use the Browse option to display the Select Destination Directory dialog 
box.
26. In the Select Destination Folder dialog box, do one of the following:
lNavigate to the drive and folder where you want to install the files. 
Double click on the folder to select it.
lType the drive and folder where you want to install the files. If the 
folder does not exist, the Setup program creates it.
27. When you have selected the location, click OK. The destination path you 
chose displays in the Select Location dialog box.  
						

							   CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Local PC
Installation Procedures2-12
28. Select Next. The Type of Install dialog box appears.
29. In the Type of Install dialog box, select one of the following:
lTy p i c a l—this selection installs all of the basic options in English, 
which is required, and all of the basic options in the language of your 
Windows operating system. Go to Step 33
.
lCustom—this selection lets you choose which options and language 
versions to install. Go to Step 30
.
NOTE:
If you are doing a Supervisor Version 8 upgrade, you must also install all of 
the required languages. The Supervisor upgrade will not automatically 
reinstall the required languages. 
						

							   CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Local PC
Installation Procedures2-13
30. If you selected Custom, the Select Components dialog box appears. This 
dialog box lets you select or deselect the components and language 
versions you want to install.
31. Before making your selections, read the bottom half of the dialog box. It 
provides you with the following information:
lThe total space required to install the options you selected
lThe total space available on the specified drive (both the destination 
drive and the drive on which Windows exists).
32. Place a check mark in front of the components in the list box that you want 
to install. 
NOTE:
The English versions of Supervisor and on-line help are always installed. 
If you are running a supported non-English version of Windows, Setup 
will also install Supervisor and on-line help in the language that matches 
your Windows System. See page 1-2 for a table showing supported 
versions. 
						

							   CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Local PC
Installation Procedures2-14
33. Select Next. The Select Folder dialog box appears.
34. The Select Folder dialog box lets you select a folder in which to put 
CentreVu Supervisor shortcuts. Do one of the following:
lChoose the default folder displayed.
lEnter a different folder name in the text box. The Supervisor setup 
program creates the folder.
lSelect a folder name from the list of existing groups.
35. Select N
ext. 
						

							   CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Local PC
Installation Procedures2-15
The Ready to Install dialog box appears.
36. Select Install to begin the installation. A progress indicator shows what 
percentage of the files are being installed.
The Install Status dialog box will display a list of all files installed for CentreVu 
Supervisor Release 8. Review this list as needed to see that all files were 
successfully installed. 
						

							   CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Local PC
Installation Procedures2-16
When the installation is complete, the Install Successful dialog box 
appears.
37. Select F
inish to return to your desktop.
38.CentreVu Supervisor installation is complete.