Lucent Technologies CentreVu Call Management System Release 3 Version 8 Software Installation And Setup Manual

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-63
Setting Up the X.25 
License
2Do not change the host name of your computer after installing the 
X.25 license. Changing the system’s host name disables the X.25 
software license.
1. Enter the command:
/etc/opt/licenses/lit_tty
The program responds:
2. Press Enter repeatedly (do not use the Tab or arrow keys) until the 
cursor moves to the brackets in front of the line that reads 
Solstice X.25 for Solaris 2 SPARC 9.1. 
CAUTION:
Select Product
[ ]  Solstice Frame Relay 2.0 for SPARC
[ ]  Solstice Frame Relay 2.0 for x86
[ ]  Solstice PPP 3.0.1 for SPARC
[ ]  Solstice PPP 3.0.1 for x86
[ ]  Solstice OSI (Stack) 8.1 for SPARC
[ ]  Solstice OSI (Stack) 8.1 for x86
[ ]
Page 1 of 2
[ ]  Exit - Save Licenses         [ ]  Exit - Don’t Save Licens
e** x=select product and go to license screen **
** Return=next product **
** n=Next Page    p=Previous Page$ [ ]  Solstice FTAM 8.0.2 for SPARC
[ ]  Solstice FTAM 8.0.2 for x86
[x]  Solstice x.25 for Solaris 2 SPARC 9.1
Solstice x.25 for Solaris 2 x86 9.1
[ ]  Solstice x.400 MTA 9.0 for SPARC
[ ]  Solstice x.400 Message Store 9.0 for SPARC
[ ]  Solstice SMTP/x.400 Internet Adaptor 9.0 for SPARC 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-64
3. Enter an x in the brackets. The program responds:
4. Enter an x in the brackets between Servers: and 1. Press 
Enter.
5. Enter the SERVER NAME (Hostname) as recorded earlier in the 
section “Retrieving System Information
.” Press Enter.
6. Enter the HOST ID (Hostid) as recorded earlier in the section 
“Retrieving System Information
.” Press Enter.
7. Pressing Enter, position the cursor on the Rights to Use: field. 
Enter a 1, and press Enter.
8. With the cursor on the Password: field, enter the 21-character 
password, and press Enter
.
9. Before you continue, compare the Data Checksum and 
Password Checksum values shown on this screen (in the 
example on Page 2-65
, ce and 77). If the Rights to Use and 
the X.25 password were entered correctly, these checksum values 
should match the checksum values that are printed on your license 
information that you received by FAX or electronic mail. These 
checksum values are identified on your license as the DC and PC 
values, and are found just to the right of your password.
Solstice X.25 for Solaris 2 SPARC
9.1
Servers: [x] 1 [ ] 3 [ ] 5  **x=select. Tab=next count. Return=server name**
SERVER NAME                                                     HOST ID
1:                                                      
Phone Number List [ ]  USA:      (+1) 800-872-4786
Expiration Date:
Rights to Use:  1                               Data Checksum:  aa
Password:                                       Password Checksum:  xx
Done setting Up This License [x]      Cancel This License [ ]
** x=select/deselect  Return=next field ** 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-65
10. Enter an x in the brackets for the Done Setting Up This 
License [  ] field. 
The program displays a popup screen similar to the following:
11. Press any key to continue 
12. Pressing Enter, move the cursor to the [ ] Exit - Save 
Licenses field. Enter an x in that field. 
The program responds:
Solstice X.25 for Solaris 2 SPARC
9.1
Servers: [x] 1 [ ] 3 [ ] 5  **x=select. Tab=next count. Return=server name**
SERVER NAME                                                    HOST ID
1: pluto1                                                         8083ad70
Phone Number List [ ]  USA:      (+1) 800-872-4786
Expiration Date:
Rights to Use: 1                                Data Checksum:  ce
Password: 08BDAD0311158CDAE0E6E                 Password Checksum:  77
Licence information successfully entered for
Solstice X.25 for Solaris 2 SPARC 9.1
Type Any Key to Continue. . .
Select Product
[ ]  SunLink X.25 8.0.2 for Solaris 2 SPARC 8.0.2
[ ]  Solstice Frame Relay 2.0 for SPARC
[ ]  Solstice Frame Relay 2.0 for x86
[ ]  Solstice PPP 3.0.1 for SPARC
[ ]  Solstice PPP 3.0.1 for x86
[ ]  Solstice OSI (Stack) 8.1 for SPARC
[ ]  Solstice OSI (Stack) 8.1 for x86
[ ]
Page 1 of 2
[ ]  Exit - Save Licenses         [ ]  Exit - Don’t Save Licenses
** x=select product and go to license screen **
** Return=next product **
** n=Next Page    p=Previous Page$ [ ]  Slolstice FTAM 8.0.2 for SPARC
[ ]  Solstice FTAM 8.0.2 for x86
[x]  Solstice x.25 for Solaris 2 SPARC 9.1
Solstice x.25 for Solaris 2 x86 9.1
[ ]  Solstice x.400 MTA 9.0 for SPARC
[ ]  Solstice x.400 Message Store 9.0 for SPARC
[ ]  Solstice SMTP/x.400 Internet Adaptor 9.0 for SPARC
Licenses are being installed.
Please wait . . .
x 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-66
When the license installation completes, the program responds:
Disregard the Now Execute the Script statement on this 
screen. This has already been done. The licensing of the X.25 
software is complete.
13. Check the /tmp/license_log file to verify that the license was 
installed correctly. The following is an example of a successful log 
file.
[ ]
Page 1 of 2
[ ]  Exit - Save Licenses         [ ]  Exit - Don’t Save Licenses
** x=select product and go to license screen **
** Return=next product **
** n=Next Page    p=Previous Page [ ]  Solstice FTAM 8.0.2 for x86
[x]  Solstice x.25 for Solaris 2 SPARC 9.1
Solstice x.25 for Solaris 2 x86 9.1
[ ]  Solstice x.400 MTA 9.0 for SPARC
[ ]  Solstice x.400 Message Store 9.0 for SPARC
[ ]  Solstice SMTP/x.400 Internet Adaptor 9.0 for SPARC
Licenses are being installed.
Please wait . . .
License Successfully Installed for:
Solstice X.25 for Solaris 2 SPARC 9.1
The license daemon log file is located in /tmp/license_log
Now Execute the Script
/etc/opt/license/LIC_CONFIG_SCRIPT
On Any Other Servers Containing the Product Software
#
16:21:22 (lmgrd) FLEXlm (v4.1) started on cmshost (Sun) (11/5/98)
16:21:22 (lmgrd) FLEXlm Copyright 1988-1994, Globetrotter Software, Inc
16:21:22 (lmgrd) License file: /etc/opt/licenses/licenses_combined
16:21:22 (lmgrd) Starting vendor daemons ... 
16:21:22 (lmgrd) Started lic.SUNW
16:21:24 (lic.SUNW) Not logging IN messages
16:21:24 (lic.SUNW) Not logging OUT messages
16:21:24 (lic.SUNW) Not logging QUEUED messages
16:21:24 (lic.SUNW) Server started on 
cmshost for: solstice_x.25  
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-67
Installing INFORMIXB
Overview2Installing the INFORMIX software for R3V8 consists of the following 
tasks:
lSet the environment
lInstall the INFORMIX Structured Query Language (SQL) 7.20 
package (optional)
lInstall the INFORMIX Standard Engine (SE) 7.22 package 
(required)
lInstall the INFORMIX Runtime ESQL 9.14 package (required)
lInstall the INFORMIX International Language Supplement (ILS) 2.11 
package (required).
 Platform 
Considerations
2
lAll platforms.
Prerequisites2lThe Solaris 7 operating system must be installed.
lVerify that you are logged in as root at the console.
lObtain the “INFORMIX SQL Version 7.20” CD, License serial 
number (S/N), and Serial Number Key (optional).
lObtain the “INFORMIX SE Version 7.22” CD, License S/N, and 
Serial Number Key (required).
lObtain the “Runtime ESQL 9.14” CD, License S/N, and Serial 
Number Key (required).
lObtain the “INFORMIX ILS Version 2.11” CD (required). 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-68
Setting Up the 
INFORMIX 
Environment
2
1. Set the terminal type by entering:
TERM=sun-cmd
export TERM
2. Add a new group and user to the system by entering:
groupadd -g 100 informix
useradd -g informix -u 100 -m -d /opt/informix 
informix
3. Set the environment variables by entering:
INFORMIXDIR=/opt/informix
export INFORMIXDIR
PATH=$PATH:$INFORMIXDIR/bin
export PATH
The 
INFORMIX installation environment is now set.
Installing the 
INFORMIX SQL 
7.20 Package 
(Optional)
2
This software package is required only if you are using custom reports. If 
you do not need this package, skip this section and go to the “Installing 
the INFORMIX SE 7.22 Package (Required)” section on Page 2-71.
1. Use the following table to record the Serial Number and Serial 
Number Key for this 
INFORMIX package.
2. Load the “
INFORMIX SQL 7.20” CD into the CD-ROM drive.  Serial Number
Serial Number Key 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-69
3. After about 15 seconds, enter mount to verify the name of the 
CD-ROM. The program responds with a list of devices and file 
systems currently mounted. The last line should display the installed 
CD, as shown below:
4. Change to the 
INFORMIX directory by entering:
cd $INFORMIXDIR
5. To verify that you are in the 
INFORMIX directory, enter:
 pwd 
The system should respond:
6. Enter the following command to copy the 
INFORMIX SQL files from 
the CD-ROM to the current directory:
tar xvf /cdrom/cdrom0/sql.tar
The program responds:
 . . . 
 . . . 
 . . . 
/cdrom/unnamed_cdrom on /vol/dev/dsk/c0t2d0/unnamed_cdrom read
only on (
current date and time)
/opt/informix
x installsql, XXX bytes, XX tape blocks
x bin/cace, 
XXX bytes, XX tape blocks
. . . . . 
. . . . . 
. . . . . 
x gls/lc11/os/sv.lc, 
XXX bytes, XX tape blocks 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-70
7. Start the INFORMIX SQL package installation by entering:
./installsql
The program responds:
8. Press Enter to continue with the installation procedure. The program 
responds:
9. Enter the 11-character License S/N (serial number) that is on your 
license. The program responds:
10. Enter the 6-character Serial Number Key that is on your license. The 
program responds:
INFORMIX-SQL Version 7.20.UC1
Copyright (C) 1984-1996 Informix Software, Inc.
Installation Script
This installation procedure must be run by root (super-
user). It will change the owner, group, and mode of all 
files of this package in this directory.  There must be a 
user informix and a group informix known to the system.
Press RETURN to continue,
or the interrupt key (usually CTRL-C or DEL) to abort.
Enter your serial number (e.g.,INF#R999999) >
Enter your serial number KEY (uppercase letters only) >
WARNING!
         This software, and its authorized use and number of 
users, are subject to the applicable license agreement with 
Informix Software, Inc. If the number of users exceeds the 
licensed number, the excess users may be prevented from using
the software.  UNAUTHORIZED USE OR COPYING MAY SUBJECT YOU AND 
YOUR COMPANY TO SEVERE CIVIL AND CRIMINAL LIABILITIES.
Press RETURN to continue,
or the interrupt key (usually CTRL-C or DEL) to abort. 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-71
11. Press Enter to continue with the installation procedure. The program 
responds:
12. Enter eject cd
Installing the 
INFORMIX SE 
7.22 Package 
(Required)
2
1. Use the following table to record the Serial Number and Serial 
Number Key for this INFORMIX package.
2.Load the “
INFORMIX SE Version 7.22” CD into the CD-ROM drive.
After about 15 seconds, enter mount to verify the name of the 
CD-ROM. The program responds with a list of devices and file 
systems currently mounted. The last line should display the installed 
CD as shown below:
3. Change to the 
INFORMIX directory by entering:
cd $INFORMIXDIR
4. To verify that you are in the 
INFORMIX directory, enter pwd. The 
system should respond:
Installing directory .
. . . . . 
. . . . . 
. . . . . 
Installation of INFORMIX-SQL complete.
#
Serial Number
Serial Number Key
 . . . 
 . . . 
 . . . 
/cdrom/unnamed_cdrom on /vol/dev/dsk/c0t2d0/unnamed_cdrom read
only on (
current date and time)
/opt/informix 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-72
5. Enter the following command to copy the INFORMIX SE files from 
the CD-ROM to the current directory:
tar xvf /cdrom/cdrom0/se.tar
The program responds:
6. Enter the following to start the installation of the 
INFORMIX SE 
software package:
./installse
The program responds:
7. Press Enter to continue with the installation procedure. The program 
responds:
8. Enter the 11-character License S/N (serial number) that is on your 
license. The program responds:
x installse, XXX bytes, XX tape blocks
x bin/secheck, 
XXX bytes, XX tape blocks
. . . . .
. . . . .
. . . . .
x gls/lc11/os/sv.lc, 
XXX bytes, XX tape blocks
#
INFORMIX-SE Version 7.22.UC1
Copyright (C) 1984-1996 Informix Software, Inc.
Installation Script
This installation procedure must be run by root (super-user).
It will change the owner, group, and mode of all files of this
package in this directory. There must be a user “informix” and
a group “informix” known to the system.
Press RETURN to continue,
or the interrupt key (usually CTRL-C or DEL) to abort.
Enter your serial number (e.g.,INF#R999999) >
Enter your serial number KEY (uppercase letters only) >