Lucent Technologies CentreVu Call Management System Release 3 Version 8 Software Installation And Setup Manual

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-73
9. Enter the 6-character Serial Number Key that is on your license. The 
program responds:
10. Press Enter to continue with the installation. The program responds:
11. Enter: eject cdrom
Installing the 
INFORMIX 
Runtime ESQL 
9.14 Package 
(Required)
2
1. Use the following table to record the Serial Number and Serial 
Number Key for this 
INFORMIX package.
2.Verify that the “
INFORMIX ESQL Version 9.14” CD is already 
loaded in the CD-ROM drive. 
3. After about 15 seconds, enter mount to verify the name of the 
CD-ROM. The program responds with a list of devices and file 
systems currently mounted. The last line should display the installed 
CD, as shown below:
WARNING!
This software, and its authorized use and number of 
users, are subject to the applicable license agreement with 
Informix Software, Inc. If the number of users exceeds the 
licensed number, the excess users may be prevented from using the 
software. UNAUTHORIZED USE OR COPYING MAY SUBJECT YOU AND YOUR 
COMPANY TO SEVERE CIVIL AND CRIMINAL LIABILITIES.
Press RETURN to continue,
or the interrupt key (usually CTRL-C or DEL) to abort.
Installing directory .
. . . . .
. . . . .
. . . . .
Installation of INFORMIX-SE complete.
#
Serial Number
Serial Number Key
/cdrom/unnamed_cdrom on /vol/dev/dsk/c0t2d0/unnamed_cdrom read
only on (
current date and time) 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-74
4. Change to the INFORMIX directory by entering:
cd $INFORMIXDIR
5. To verify that you are in the 
INFORMIX directory, enter
 pwd
6. The system should respond:
7. Enter the following command to copy the 
INFORMIX ESQL files 
from the CD-ROM to the current directory:
tar xvf /cdrom/cdrom0/conn.tar
The program responds:
8. Enter the following to start the installation of the 
INFORMIX ESQL 
software package:
./installconn
The program responds:
9.Ignore the “cat” message, and enter y. The program responds:
/opt/informix
x conncontent.tar, 22489600 bytes, 43925 tape blocks
x installconn, 10704 bytes, 21 tape blocks
INFORMIX-Connect Version 2.02.UC4
Copyright (C) 1984-1998 Informix Software, Inc.
cat: cannot open /opt/informix/etc/ClientSDK-cr
Your existing INFORMIX shared libraries, if any, will be
replaced and upgraded.
Are you sure? [yes/no]
Is I-Connect being installed along with Informix Dynamic
Server with Universal Data Option (Release 9, requires to
be run as user informix)?
(yes or no) 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-75
10. Enter n. The program responds:
11. Press Enter to continue with the installation procedure. The program 
responds:
12. Enter the 11-character License S/N (serial number) that is on your 
license. The program responds:
13. Enter the 6-character Serial Number Key that is on your license. The 
program responds:
Extracting files from conncontent file...
Installing I-Connect as user root...
 
Installation Script
 
Installation Script Requirements:
- A user informix and a group informix must be known
to the system.
- The product source files must have been loaded by user
root
- This installation procedure must be run by user root.
This script will change the owner, group, and mode of 
many of the files of this package in this directory.  
Press RETURN to continue, or the interrupt key
(usually CTRL-C or DEL) to abort.
Enter your serial number (e.g.,INF#R999999) >
Enter your serial number KEY (uppercase letters only) >
WARNING!
         This software, and its authorized use and number of 
users, are subject to the applicable license agreement with 
Informix Software, Inc. If the number of users exceeds the 
licensed number, the excess users may be prevented from using
the software.  UNAUTHORIZED USE OR COPYING MAY SUBJECT YOU AND 
YOUR COMPANY TO SEVERE CIVIL AND CRIMINAL LIABILITIES.
Press RETURN to continue,
or the interrupt key (usually CTRL-C or DEL) to abort. 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-76
14. Press Enter to continue with the installation procedure. The program 
responds:
15. Enter eject cdrom to eject the CD-ROM from the computer.
16. Remove the CD-ROM from the disk tray and place the CD-ROM 
back in its case. You must now install the 
INFORMIX ILS software.
Installing the 
INFORMIX ILS 
2.11 Package 
(Required)
2
1.Load the “INFORMIX ILS Version 2.11” CD into the CD-ROM drive. 
2. After about 15 seconds, enter mount to verify the name of the 
CD-ROM. The program responds with a list of devices and file 
systems currently mounted. The last line should display the installed 
CD, as shown below:
3. Change to the 
INFORMIX directory by entering:
cd $INFORMIXDIR
4. To verify that you are in the 
INFORMIX directory, enter pwd. The 
system should respond:
Installing directory .
. . . . . 
. . . . . 
. . . . . 
Installation of INFORMIX-Connect complete.
#
 . . . 
 . . . 
 . . . 
/cdrom/volume_1 on /vol/dev/dsk/c0t2d0/volume_1 read only
on (
current date and time)
/opt/informix 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-77
5. Enter the following command to start the 
INFORMIX ILS installation 
program:
sh /cdrom/cdrom0/install
The program responds:
6. Enter the number that corresponds with the language you wish to 
use during the installation program (for example, enter 1 to select 
English). If you select a language other than English, you must 
also select a display character set. After you make that selection, 
the program responds:
INTERNATIONAL LANGUAGE SUPPLEMENT USER INTERFACE LANGUAGE
 
     (1)  English            (5)  Russian           
     (2)  German             (6)  Polish            
     (3)  French             (7)  Czech             
     (4)  Spanish            (8)  Slovak 
     (9)  Help
     (10) Exit
 
Select installer language?
  INFORMIX INTERNATIONAL LANGUAGE SUPPLEMENT (ILS)
                    INSTALLER FOR ALL UNIX PLATFORMS
 
Choose install type:
    (1) Express Install
          Installs everything relating to one or more languages.
 
    (2) Custom Install
          You specify exactly what you want to install.
Other options:   
    (3) Help
          Displays information on the contents of this package, 
and explains the options on this screen.
    (4) Exit
          Exit this installer.
 
(E)nglish (D)eutsch/German (F)rancais/French e(S)panol/Spanish
(R)ussian (P)oliski/Polish (C)ekych/Czech    s(L)ovych/Slovak
 
Enter one choice, and hit ENTER: 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-78
7. Enter 2 to select Custom Install. The program responds:
8. Enter 2 4 to select the Locale and Code set conversion 
options. The program responds:
 Custom Install
                      --------------
 
    (1) User interface
          Installs a localised user interface for Servers and Tools.
 
    (2) Locale
          Installs locales by language, territory and code page.
    (3) Operating System locales
          Installs operating system equivalent locales.
    (4) Code set conversion  
          Installs code set conversion files between code pages.
    (5) Help                      (6) GLS source install [Enabled]
    (7) Previous Screen           (8) Exit
 
     (E)nglish (D)eutsch/German (F)rancais/French e(S)panol/Spanish
     (R)ussian (P)oliski/Polish (C)ekych/Czech    s(L)ovych/Slovak
 
Select the components to install:
LOCALES - LANGUAGES
 
  Install locales and associated character maps for what languages?
 
     (1)  Arabic             (11) Greek              (21) Romanian         
     (2)  Bulgarian          (12) Hebrew             (22) Russian          
     (3)  Chinese            (13) Icelandic          (23) Serbo-Croatian   
     (4)  Czech              (14) Italian            (24) Slovak           
     (5)  Danish             (15) Japanese           (25) Spanish          
     (6)  Dutch              (16) Korean             (26) Swedish          
     (7)  English            (17) Latvian            (27) Thai             
     (8)  Finnish            (18) Norwegian          (28) Turkish          
     (9)  French             (19) Polish             (29) Ukrainian        
     (10) German             (20) Portuguese        
 
     (30) Help               (31) All Of The Above
     (32) Custom Screen      (33) Exit
 
     (E)nglish (D)eutsch/German (F)rancais/French e(S)panol/Spanish
     (R)ussian (P)oliski/Polish (C)ekych/Czech    s(L)ovych/Slovak
 
Enter one or more choices, separated with spaces, and hit ENTER: 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-79
9. Enter 7 15 to select English and Japanese. The program 
responds:
10. Enter 3 to select United States. The program responds 
LOCALES - TERRITORIES
 
  Install English language locales for what territories?
 
     (1)  Australia         
     (2)  United Kingdom    
     (3)  United States     
 
     (4)  Help               (5)  All Of The Above
     (6)  Custom Screen      (7)  Exit
 
     (E)nglish (D)eutsch/German (F)rancais/French e(S)panol/Spanish
     (R)ussian (P)oliski/Polish (C)ekych/Czech    s(L)ovych/Slovak
 
Enter one or more choices, separated with spaces, and hit ENTER:
LOCALE - CODESETS
 
  Install English language locales for what codesets?
 
     (1)  ISO 8859-1        
     (2)  DOS Code Page 850 
     (3)  Windows CP 1252   
     (4)  UNICODE           
     (5)  UTF8              
 
     (6)  Help               (7)  All Of The Above
     (8)  Custom Screen      (9)  Exit
 
     (E)nglish (D)eutsch/German (F)rancais/French e(S)panol/Spanish
     (R)ussian (P)oliski/Polish (C)ekych/Czech    s(L)ovych/Slovak
 
Enter one or more choices, separated with spaces, and hit ENTER: 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-80
11 . E n t e r 5 to select UTF8. The program responds:
12. Enter 4 to select UTF8. The program responds:
LOCALE - CODESETS
 
Install Japanese language locales for what codesets?
 
     (1)  Standard-Shift-JIS
     (2)  Shift-JIS+JISX0212
     (3)  UJIS/EUC          
(4) UTF8
 
     (4)  Help               (5)  All Of The Above
     (6)  Custom Screen      (7)  Exit
 
     (E)nglish (D)eutsch/German (F)rancais/French e(S)panol/Spanish
     (R)ussian (P)oliski/Polish (C)ekych/Czech    s(L)ovych/Slovak
 
Enter one or more choices, separated with spaces, and hit ENTER:
CODESET CONVERSION REGIONS
 
  Choose the regions for which you require codeset conversion tables.
     (1)  Arabic             (7)  Japanese          
     (2)  Baltic             (8)  Korean            
     (3)  Cyrillic           (9)  Simplified Chinese
     (4)  Eastern European   (10) Trad. Chinese     
     (5)  Greek              (11) Turkish           
     (6)  Hebrew             (12) Western European  
 
     (13) Help               (14) All Of The Above
     (15) Custom Screen      (16) Exit
 
     (E)nglish (D)eutsch/German (F)rancais/French e(S)panol/Spanish
     (R)ussian (P)oliski/Polish (C)ekych/Czech    s(L)ovych/Slovak
 
Enter one or more choices, separated with spaces, and hit ENTER:  
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-81
13. Enter 7 12 to select Japanese and Western Europe. The 
program responds:
14. Enter 1 2 5 to select Shift-JIS+JISX0212, Standard-
Shift-JIS, and UTF8. The program responds:
CODESET CONVERSION TABLES - CODESETS
  Install Japanese codeset conversion tables for what codesets?
 
  (1)  Shift-JIS+JISX0212
  (2)  Standard-Shift-JIS
  (3)  UJIS/EUC          
  (4)  UNICODE           
  (5)  UTF8              
 
     (6)  Help               (7)  All Of The Above
     (8)  Custom Screen      (9)  Exit
 
     (E)nglish (D)eutsch/German (F)rancais/French e(S)panol/Spanish
     (R)ussian (P)oliski/Polish (C)ekych/Czech    s(L)ovych/Slovak
 
  Select two or more options.  All available combinations of the
  selected options will be installed.
CODESET CONVERSION TABLES - CODESETS
  Install Western European codeset conversion tables for what codesets?
 
  (1)  ASCII 7-bit        (9)  IBM CCSID 00273    (17) IBM CCSID 871    
  (2)  DOS Code Page 437  (10) IBM CCSID 00277    (18) ISO-7-Danish     
  (3)  DOS Code Page 850  (11) IBM CCSID 00278    (19) ISO-7-German     
  (4)  DOS Code Page 860  (12) IBM CCSID 00280    (20) ISO 8859-1       
  (5)  DOS Code Page 863  (13) IBM CCSID 00284    (21) UNICODE          
  (6)  DOS Code Page 865  (14) IBM CCSID 00285    (22) UTF8             
  (7)  EBCDIC             (15) IBM CCSID 00297    (23) Windows CP 1252  
  (8)  HP-Roman8          (16) IBM CCSID 00500   
 
     (24) Help               (25) All Of The Above
     (26) Custom Screen      (27) Exit
 
     (E)nglish (D)eutsch/German (F)rancais/French e(S)panol/Spanish
     (R)ussian (P)oliski/Polish (C)ekych/Czech    s(L)ovych/Slovak
 
  Select two or more options.  All available combinations of the
  selected options will be installed. 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-82
15. Enter 20 22 to select ISO 8859-1 and UTF8. The program 
responds
16. Press Enter to begin installation. The program responds:
 SUMMARY: You have chosen to install the following
-------------------------------------------------------------
Installing locales:
  English            United States      UTF8              
  Japanese           Japan  UTF8
Installing codeset conversion tables:
  Japanese           Shift-JIS+JISX0212
                     Standard-Shift-JIS
                     UTF8              
  Western European   ISO 8859-1        
                     UTF8              
Hit ENTER to confirm or `q` to return to main menu.
 Installing international software  Please wait...
    Installing gls...
    Installation complete.
    See $INFORMIXDIR/ils.log for a list of installed files.
    See $INFORMIXDIR/release/README and
        $INFORMIXDIR/release/ILS_COMPAT for further information.
 
Hit ENTER to return to main menu...