Lucent Technologies CentreVu Call Management System Release 3 Version 8 Software Installation And Setup Manual

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-53
9. Press Enter
The program responds:
10. Press Enter
 The program responds:
11. Press Enter
 The program responds:
12. Press Enter
 The program responds:
13. Press Enter
 The program responds:
BFS directory [/usr/spool/erpcd/bfs]:
Do you wish to install manual pages at this time? [y]:
On-line manual pages will be installed in the appropriate 
subdirectory (i.e., ANNEX and index) of the manual base 
directory.
What is the the manual page base directory? (q=quit) 
[/usr/man]:
Available installation options are:
    1. Install binary images only (7MB)
    2. Install source code only, but do not compile (11MB)
    3. Get both binary images and source code, but do not 
compile (13MB)
    4. Quit
Enter installation choice [1]: 
Are you ready to continue (y/q=quit) [y]:  
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-54
14. Press Enter
The program responds:
15. Select the Install all images option. 
The program responds:
16. Enter y
 The program responds:
17. Enter 7 to select the none option. The program responds:
1)      Com-Server Annex 3
2)      Com-Server MicroAnnex
3)      Install all images
Please select the annex model(s) you will be using.
You can specify a list separated by spaces or N for none:  
To save room on your system, the above directories can be 
removed. You may want to enter ? at the prompt below to get 
more help.
Remove these directories (y/n) [n]: 
TWhat is your default security regime:
    1) acp
    2) native UNIX
    3) SecureID
    4) safeword
    5) kerberos
    6) deny (access will be denied)
    7) none (access is unconditionally granted)
    8) radius
Enter security regime [1]: 
Do you want the restrictions to apply to PPP and SLIP? [n]: 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-55
18. Press Enter
 The program responds:
19. Enter: n
 The program responds:
20. Press Enter. The program responds:
21. Press Enter
 The program responds:
22. Press Enter
 The program responds:
Do you want the erpcd daemon to provide access control (y/n) 
[y]:
Copies of the following files have been updated:
         service annex-initd
Do you want to install any of these files (y/n) [y]
Copy file save/modified/service to /etc/services 
(y/n) [y]:
Copy file save/modified/annex-initd                           
/etc/rc2.d/annex-initd
(y/n) [y]:
WARNING: The file annex-initd will have to be linked or 
copied to an appropriate file in /etc/rc2.d to have 
the erpcd daemon started and shut-down automatically.
No more system files to create or updateNo more system files to create or update
 
Do you want to start-up the new version of the erpcd 
daemon? (y/n) [y]: 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-56
23. Press Enter
 The program responds:
24. Enter: n
 The program responds with the system prompt.
Setting Up the 
NTS Start-Up 
Files
2
The following commands create symbolic links to S99annex-initd 
and other important files and then check to verify that the files were 
linked successfully. 
1.  On a single command line, enter:
echo “/ect/rc2.d/annex-initd start” > 
/etc/rc2.d/S99annex-initd
1. Enter:
chmod 744 /etc/rc2.d/annex-initd
chmod 744 /etc/rc2.d/S99annex-initd
2. Enter: 
ls -l /etc/rc2.d/annex-initd
ls -l /etc/rc2.d/S99annex-initd
After each ls command, review the first column of the
 output to 
verify that file permissions are set correctly. The correct file 
permissions will exhibit the following format:
- r w x r - - r - - 
3. Enter:
ln -s /usr/annex/na /usr/bin/na
ln -s /usr/annex/rtelnet /usr/bin/rtelnet
ln -s /usr/annex/aprint /usr/bin/aprint
Starting-up the new version of the erpcd daemon.
     Comm.Server Software Installation Script
Do you wish to install the Annex Manager (y/n/q=quit) [y]: 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-57
4. Enter:
ls -l /usr/bin/na
ls -l /usr/bin/rtelnet
ls -l /usr/bin/aprint
After each command, review the output and verify that the symbolic 
links are set correctly. If the symbolic links are set correctly, the ls 
command output will indicate the link at the end of each line. For 
example, the ls -l /usr/bin/na command will generate the 
following output:    
5. Enter: eject cdrom
Installing the 
Solstice for 
Server Connect 
X.25 Package
2
Overview2This procedure installs the X.25 drivers used for connections to the 
switch. If the CMS computer is using LAN connectivity for TCP/IP instead 
of X.25 connectivity to the switch, skip this section.
 Platform 
Considerations
2
lAll platforms.
Prerequisites2lThe Solaris 7 operating system must be installed.
lVerify that you are logged in as root at the console.
lObtain the “Solstice for Server Connect, Version - March 1997” CD.
lObtain the 21-character password for your X.25 license.
If the password for your X.25 license is not included with your CD, 
you must contact 
Sun directly. See the Proof of License Certificate 
that is included with the CD for procedures you must follow to obtain 
your password. Note that the only way 
Sun will deliver this password 
is with a FAX or by electronic mail.
 -rwxr--r--  1 root other 563072 (current date) usr/bin/na -> usr/annex/na 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-58
Retrieving System 
Information
2
If you already know your hostname, hostid, and X.25 license 
password, fill in the table below, skip this procedure, and go to the 
“Installing the Solstice for Server Connect X.25 Package
” procedure. If 
you do not already know your hostname and hostid, use this 
procedure to determine that information:
1. Enter the command: showrev
The program displays something similar to the following:
2. Identify the Hostname and Hostid (similar to that shown in bold 
on the previous screen). Use the following table to record this 
information, along with your X.25 password.
Installing the 
Solstice for Server 
Connect
 X.25 
Drivers
2
1. Load the “Solstice for Server Connect, Version - March 1997” CD 
into the CD-ROM drive. 
2. After about 15 seconds, enter mount to verify the name of the 
CD-ROM. The program responds with a list of devices and file 
systems currently mounted. The last line should display the installed 
CD, as shown below:Hostname
Hostid
X.25 Password
Hostname: XXXXXXXX
Hostid: XXXXXXX
Release: 5.7
Kernel architecture: sun4u
Application architecture: sparc
Hardware provider: Sun_Microsystems
Domain:
Kernel version: SunOS 5.7
Generic 

 . . . 
 . . . 
 . . . 
/cdrom/server_connect_397 on /vol/dev/dsk/c0t2d0/server_connect_
397 read only on (
current date and time) 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-59
3. Change directories by entering:
cd /cdrom/cdrom0/products
4. Enter:
/usr/sbin/pkgadd -d x25/Image/sparc
The program responds:
5. Enter 1 2 3 4 
 The program responds:
The following packages are available:
1 SUNWllc2a LLC2 kernel modules and include files for Solaris/SPARC
(sparc) 9.1
2 SUNW11c2b LLC2 user programs and man pages for Solaris/SPARC
(sparc) 9.1
3 SUNWx25a X.25 kernel modules and include files for Solaris/SPARC
(sparc) 9.1
4 SUNWx25b X.25 user programs and libraries for Solaris/SPARC
(sparc) 9.1
5 SUNWx25h Solstice X.25 9.1 documentation in HTML
(all) 1.1
Select package(s) you wish to process (or ‘all’ to process
all packages). (default: all) [?,??,q]:
Processing package instance  from

.....
.....
.....
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of  [y,n,?]  
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-60
6. Enter y
 The program responds:
7. Enter y
The program responds:
8. Enter y
 The program responds:
Installing llc2a
,
,
,
The following files are already installed on the system and are being
used by another package:
*/opt/SUNWconn/man 
*/opt/SUNWconn/man/man7 
* - conflict with a file which does not belong to any package.
Do you want to install these conflicting files [y,n,?,q] 
Installing LLC2 kernel modules and include files for Solaris/SPARC as 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-61
9. Enter y
 The program responds:
10. Enter q 
The program responds with the system prompt.
11. Enter:
/usr/sbin/pkgadd -d licenses/Image/sparc SUNWcclit SUNWlicsw
The program responds:
Installing X.25 user programs and libraries for Solaris/SPARC as 
## Installing part 1 of 1.
.....
Installation of  was successful.
The following packages are available:
1 SUNWllc2a LLC2 kernel modules and include files for Solaris/SPARC
(sparc) 9.1
2 SUNW11c2b LLC2 user programs and man pages for Solaris/SPARC
(sparc) 9.1
3 SUNWx25a X.25 kernel modules and include files for Solaris/SPARC
(sparc) 9.1
4 SUNWx25b X.25 user programs and libraries for Solaris/SPARC
(sparc) 9.1
5 SUNWx25h Solstice X.25 9.1 documentation in HTML
(all) 1.1
Select package(s) you wish to process (or ‘all’ to process
all packages). (default: all) [?,??,q]:
Processing package instance  from 

....
....
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of  [y,n,?] 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-62
12. Enter y
 The program responds:
13. Enter y
 The program responds:
14. Move to the root directory by entering cd
15. Enter eject cd
The X.25 license must now be setup.
Installing Solstice Connect Center license 
information as 
## Installing part 1 of 1.
.....
.....
This package contains scripts which will be executed 
with super-user permission during the process of 
installing this package.
Do you want to continue with the installation of 
 [y,n,?] 
Installing FlexLM License System as 
## Installing preinstall script.
## Installing part 1 of 1.
.....
.....
Installation of  was successful.
#