Lucent Technologies CentreVu Call Management System Release 3 Version 8 Software Installation And Setup Manual

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing INFORMIX2-83
17. Press Enter. The program responds:
18. Enter 4 to exit the installation program. The program responds:
19. Enter eject cdrom to eject the CD-ROM from the computer.
20. Remove the CD-ROM from the disk tray and place the CD-ROM 
back in its case. 
  INFORMIX INTERNATIONAL LANGUAGE SUPPLEMENT (ILS)
                    INSTALLER FOR ALL UNIX PLATFORMS
 
Choose install type:
    (1) Express Install
          Installs everything relating to one or more languages.
 
    (2) Custom Install
          You specify exactly what you want to install.
Other options:   
    (3) Help
          Displays information on the contents of this package, 
and explains the options on this screen.
    (4) Exit
          Exit this installer.
 
(E)nglish (D)eutsch/German (F)rancais/French e(S)panol/Spanish
(R)ussian (P)oliski/Polish (C)ekych/Czech    s(L)ovych/Slovak
 
Enter one choice, and hit ENTER:
  Exiting the International Language Supplement installer. 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing DiskSuite2-84
Installing DiskSuite2
Installing DiskSuite includes the following:
lInstalling Solstice DiskSuite software
lInstalling Sun Solaris patches
lSetting up Solstice DiskSuite.
Installing the 
Solstice 
DiskSuite 
Software2
Overview2The Solstice DiskSuite software package allows the disks of the system 
to be managed as if they were a single file system.
 Platform 
Considerations
2
lAll platforms.
Prerequisites2lThe Solaris 7 operating system must be installed.
lVerify that you are logged in as root at the console.
lObtain the “Solaris Easy Access Server 2.0” CD.
lYou must have partitioned the hard disks for the Solstice DiskSuite 
system as specified in “Partitioning the Hard Disks” on Page 2-18.
Procedure21. Load the “Solaris Easy Access Server 2.0 CD into the CD-ROM 
drive.
2. Enter cd to move to the root directory. 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing DiskSuite2-85
3. After about 15 seconds, enter mount to verify the name of the 
CD-ROM. The program responds with a list of devices and file 
systems currently mounted. The last line should display the installed 
CD as shown below:
4. Enter:    
The program responds:
5. Enter y. The program responds:
6. Enter eject cd 
.
.
/cdrom/solaris_easy_access_server_2_0 on /vol/dsk/c0t2d0/disk
 read only on (
current date and time)
/usr/sbin/pkgadd -d /cdrom/cdrom0/products/DiskSuite_4.2/sparc SUNWmd
This package contains scripts which will be executed with 
super-user permissions duringthe process of installing this 
package.
Do you want to continue with installation of 
 [y. n, ?]
Installing Sosltice DiskSuite as 
....
##Installation of was successful.  
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing DiskSuite2-86
Installing the 
Sun Solaris 
Patches
2
Overview2The Sun Solaris patches are delivered with the CMS software.
Platform 
Considerations
2
lAll platforms.
Prerequisites2lThe Solaris 7 operating system must be installed.
lAll Solaris packages must be installed (HSI/S, HSI/P, SAI/P, X.25) as 
required by your particular system configuration.
lThe Solstice DiskSuite software must be installed.
lVerify that you are logged in as root at the console.
lObtain the “CentreVu Call Management System” CD 
Procedure21. Load the “CentreVu Call Management System” CD into the 
CD-ROM drive.
2. After about 15 seconds, enter mount to verify the name of the 
CD-ROM. The program responds with a list of devices and file 
systems currently mounted. The last line should display the installed 
CD as shown below:
3. Begin the installation by entering the following:
/usr/sbin/pkgadd -d /cdrom/cdrom0 spatches
The program responds:
/cdrom/cms on /vol/dev/dsk/c0t2d0/cms read only on
(
current date and time)
This package contains scripts which will be executed with 
super-user permission during the process of installing 
this package.
Do you want to continue with the installation of 
 [y,n,?] 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing DiskSuite2-87
4. Enter y to continue. The program responds:
5. To continue installing the patches, enter:
/tmp/patches/install_patches | tee -a /var/sadm/spatch.log
The program responds:
The program generates various lists of files to be patched. This can 
take from 30 minutes to several hours to process, depending on the 
number of patches and the CMS computer. When it finishes, the 
program displays the system prompt.
6. Reboot the system by entering:
/usr/sbin/shutdown -y -i6 -g0
7. Log in as 
root. The Sun Solaris patches are installed and the system 
kernel has been rebuilt. 
Do 
not remove the “CentreVu Call Management System” CD from 
the CD-ROM drive.
Changing 
Directory 
Permissions
B
1. To change directory permissions for the etc directory, enter:
installf SUNWcsr /etc d 0755 root sys
Installing CMS Supplied Solaris Patches as 
. . . 
Installation of  was successful.
Generating list of files to be patched...
Verifying sufficient filesystem capacity (exhaustive method)
Installing patch packages...
Patch number 103461-18 has been successfully installed.
See /var/sadm/patch/103461-18/log for details
Patch packages installed:
  SUNWmfrun 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing DiskSuite2-88
Setting Up 
Solstice 
DiskSuite
2
Overview2This procedures configure Solstice DiskSuite for the system.
Separate procedures are provided for unmirrored and mirrored 
systems. For more information about disk-mirrored CMS systems, see 
CentreVu® CMS Disk-Mirrored Systems (585-210-940).
 Platform 
Considerations
2
lAll platforms 
Prerequisites2lThe Solaris 7 operating system must be installed
lThe Solstice DiskSuite software must be installed
lThe Solaris patches must be installed
lVerify that you are logged in as root at the console
lThe “CentreVu Call Management System” CD should be loaded in 
the CD-ROM drive
Configuring 
DiskSuite on an 
unmirrored 
system
2
This procedure configures DiskSuite on an unmirrored system. 
1. Enter:
stty erase

(where  means “press/hold Control as 
you press H”)
The stty command sets up your backspace key as an actual 
backspace. If you do not enter this command, you will have to use 
the Delete key as a backspace.
NOTE: 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing DiskSuite2-89
2. Enter the following commands:
3. Create system files for the 
Solstice DiskSuite software by entering 
these commands:
PATH=$PATH:/usr/opt/SUNWmd/sbin
export PATH
/olds/olds -check_disks
The system responds:
If this command fails, see “Troubleshooting a Solstice DiskSuite 
Software Installation” in Chapter 5, “Solving Installation-Related 
Problems”.
mkdir /olds 
cp /cdrom/cdrom0/cms/reloc/rdonly/olds_install/* /olds
cd /olds
chmod +x /olds/olds
scsi=c1
number of external scsi controllers with disks  is = 1
number of disks is = 2
checking device: c0t0d0
Warning: Current Disk has mounted partitions.
checking device: c0t2d0
device: c0t2d0 will not be used
checking device: c1t0d0
checking device: c[0-3]t1[0-9]d0
device: c[0-3]t1[0-9]d0 will not be used
valid disks are c0t0d0 c1t0d0
Warning: Current Disk has mounted partitions.
disk:c0t0d0 is partitioned ok
disk:c1t0d0 is partitioned ok
Success, checking disks.
NOTE: 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing DiskSuite2-90
4. Enter the following:
/olds/olds -mk_files
The system responds:
5. When the system prompt reappears, verify that all the disk drives on 
your system have been recognized. To do that, enter:
cat /olds/md.tab.new
Find the #/cms section; it should reflect the precise number of disk 
drives on your system. The example shown below shows two disk 
drives on the system:
6. If everything appears to be correct, continue with Step 7.
If there is a discrepancy in the number of disks, check for disk 
recognition errors using the procedure, “Checking for Disk 
Recognition Errors” on Page 2-95.
7. Save the original vfstab and md.tab files with the following 
commands:
cp /etc/vfstab /etc/vfstab.orig
cp /etc/opt/SUNWmd/md.tab /etc/opt/SUNWmd/md.tab.orig
scsi=c1
number of external scsi controllers with disks  is = 1
number of disks is = 2
Success, creating md.tab.new and/or vfstab.new. 
#state database replicas
mddb00 c0t0d0s1
mddb01 c1t0d0s0
#/cms
d19 2 1 /dev/rdsk/c0t0d0s3 1 /dev/rdsk/c1t0d0s1
d21 -m d19 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing DiskSuite2-91
8. Enter:
/olds/olds -metadbs
The program responds:
9. Enter:
/olds/olds -setup
The olds -setup command may take some time. It should take 
about 1 minute of run time for each gigabyte of hard disk space on 
your system.
scsi=c1
number of external scsi controllers with disks  is = 1
number of disks is = 2
checking device: c0t0d0
Warning: Current Disk has mounted partitions.
checking device: c0t2d0
device: c0t2d0 will not be used
checking device: c1t0d0
checking device: c[0-3]t1[0-9]d0
device: c[0-3]t1[0-9]d0 will not be used
valid disks are c0t0d0 c1t0d0
Warning: Current Disk has mounted partitions.
disk:c0t0d0 is partitioned ok
disk:c1t0d0 is partitioned ok
Success, setting up metadb replicas. 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing DiskSuite2-92
If all of the commands succeed, the system responds with a series 
of lines reflecting the structure of your disk system. Those lines will 
look something like the following (the specific disk names will vary 
from system to system):
The program begins to construct the new file system. When the 
“Success...” message displays and the system prompt reappears, 
the file system is complete and you are ready to continue with the 
installation. The program responds:
If these commands fail, make a note of the error message and see 
the “Solving Installation-Related Problems” on page 5-1
”.
scsi=c1
number of external scsi controllers with disks  is = 1
number of disks is = 2
checking device: c0t0d0
Warning: Current Disk has mounted partitions.
checking device: c0t2d0
device: c0t2d0 will not be used
checking device: c1t0d0
checking device: c[0-3]t1[0-9]d0
device: c[0-3]t1[0-9]d0 will not be used
valid disks are c0t0d0 c1t0d0
Warning: Current Disk has mounted partitions.
disk:c0t0d0 is partitioned ok
disk:c1t0d0 is partitioned ok
d19: Concat/Stripe is setup
.
.
/dev/md/rdsk/d19:14422590 sectors in 15262 cylinders of 15 tracks, 63 
sectors
7042.3MB in 954 cyl groups (16 c/g, 7.38MB/g, 3584 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
 32, 15216, 30400, 45584, 60768, 75952, 91136, 106320, 121504, 136688,
 167056, 182240, 197424, 212608, 227792, 241952, 257136, 272320, 287504,
.
.
.
14198416, 14213600, 14228784, 14243968, 14259152, 14273312, 14288496,
 14303680, 14318864, 14334048, 14349232, 14364416, 14379600, 14394784,
 14409968,
ufs fsck: sanity check: /dev/md/rdsk/d19 okay
Success, system set up successfully