Lucent Technologies CentreVu Call Management System Release 3 Version 8 Software Installation And Setup Manual

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-43
Procedure21.Load the “SunHSI/P Adapter 2.0” CD into the CD-ROM drive.
2. After about 15 seconds, enter mount to verify the name of the 
CD-ROM. The program responds with a list of devices and file 
systems currently mounted. The last line should display the installed 
CD, as shown below:
3. Enter:
/usr/sbin/pkgadd -d /cdrom/cdrom0/Product SUNWhsip
4.  Press Enter
The program responds:
 . 
/cdrom/sunhsip_2_0 on /vol/dev/dsk/c0t2d0/sunhsip_2_0 read only 
on (
current time and date)
The following packages are available:
  1  SUNWhsip      SunHSI/P Driver for PCI
                   (sparc) 2.0,REV=1998.10.22
  2  SUNWhsipm     SunHSI/P Man Pages for PCI
                   (sparc) 2.0,REV=1998.10.22
  3  SUNWhsipu     SunHSI/P Utilities for PCI
                   (sparc) 2.0,REV=1998.10.22
Select package(s) you wish to process (or all to process
all packages). (default: all) [?,??,q]:
Processing package instance  from 

SunHSI/P Driver for PCI
(sparc) 2.0,REV=1998.10.22
. . . . . . . . . 
This package contains scripts which will be executed with 
super-user permission during the process of installing this 
package.
Do you want to continue with the 
installation of  [y,n,?] 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-44
5. Enter: y 
The program proceeds to install the SUNWhsip, SUNWhsipm and 
SUNWhsipu packages. When the installation is finished, the 
program returns to the installation menu and prompts:
6. Enter q:
7. Enter: eject cdrom
Select package(s) you wish to process (or 
all to process all packages). (default: 
all) [?,??,q]: 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-45
Installing the 
SAI/P Adapter 
Drivers
2
Overview2The SAI/P card/cards provides serial asynchronous interface ports to the 
CMS computer. If your system does not have an SAI/P card, go the next 
procedure.
Platform 
Considerations
2
lUltra 5 only
Prerequisites2lThe Solaris 7 operating system must be installed.
lThe SAI/P card(s) must be installed before installing the software.
lVerify that you are logged in as root at the console.
lObtain the “SunSAI/P Adapter 2.0” CD and load it in the CD-ROM 
drive.
Procedure21. After about 15 seconds, enter mount to verify the name of the 
CD-ROM. The program responds with a list of devices and file 
systems currently mounted. The last line should display the installed 
CD as shown below:
 
/cdrom/sunsaip_2_0 on /vol/dev/dsk/c0t2d0/sunsaip_2_0 
read only on (
current date and time)/cdrom/sunsaip_2_0 on /vol/dev/dsk/c0t2d0/sunsaip_2_0
read only on (
current date and time) 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-46
2. Enter:
/usr/sbin/pkgadd -d /cdrom/cdrom0/Product/saip_2
The program responds with a list of available packages:
3. Press: Enter 
The program responds:
4. Enter: y
The program installs the SAI/P driver packages and returns to the 
installation menu.
5. Enter: q
6. Enter: eject cdrom 
The following packages are available:
  1  SUNWsaip      Serial Asynchronous Interface Driver (PCI)
                   (sparc) 2.0,REV=1998.10.19
  2  SUNWsaipu     Serial Asynchronous Interface Utilities (PCI)
                   (sparc) 2.0,REV=1998.10.19
Select package(s) you wish to process (or all to process
all packages). (default: all) [?,??,q]:
This package contains scripts which will be executed 
with super-user permission during the process of 
installing this package.
Do you want to continue with the installation of 
 [y,n,?] 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-47
Installing the 
Aurora Port 
Drivers
2
Overview2The following procedures are used to install the Aurora ports card drivers.
 Platform 
Considerations
2
lSPARCserver only
Prerequisites2lThe Solaris 7 operating system must be installed.
lVerify that you are logged in as root at the console.
lObtain the “Aurora Drivers” CD.
Procedure21. Load the “Aurora Drivers” CD into the CD-ROM drive.
2. After about 15 seconds, enter mount to verify the name of the 
CD-ROM. The program responds with a list of devices and file 
systems currently mounted. The last line should display the installed 
CD as shown below:
 
3. Add the Aurora package by entering the following:
/usr/sbin/pkgadd -d /cdrom/cdrom0
The program responds:
 . . . 
/cdrom/aurora_drivers on /vol/dev/dsk/c0t2d0/aurora_drivers
read only on (
current date and time)
The following packages are available:
  1  AURAacs  Aurora 40X, 80X, WMS 2000/3000 Base Driver
                   (sparc) 6.14
  2  AURAacsa  Aurora 40X, 80X, WMS 2000/3000 Asynchronous Drive
r
                   (sparc) 3.14
  3  AURAsio16 Aurora 1600SE device driver
                   (sparc) 5.13
Select package(s) you wish to process (or all to process
all packages). (default: all) [?,??,q]:  
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-48
4. Select 1 and 2 to install the 8-port card drivers, select 3 to install 
the 16-port card drivers, or press Enter to select both sets of drivers.
Do not try to install the 16-port card drivers and then install 
the 8-port card drivers; you will get errors during installation. The 
following screens show the installation for both sets of drivers. If 
you select one or the other, your installation screens will differ.
The program responds:
5. Enter y
The program responds:
NOTE:
Processing package instance  from 

Aurora 40X, 80X, WMS 2000/3000 Base Driver
(sparc) 6.14
.
.
This package contains scripts which will be executed with
super-user permission during the process of installing this 
package.
Do you want to continue with the installation of 
[y,n,?]
Installing Aurora 40X, 80X, WMS 2000/3000 Base Driver
as 
## Installing part 1 of 1.
/etc/rc2.d/S91AURAacs
.
.
[ verifying class  ]
## Executing postinstall script.
Installation of  successful.
There are 2 more packages to be installed.
Do you want to continue with installation [y,n,?] 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-49
6. Enter y 
The program responds:
7. Enter y
The program responds:
8. Enter y
The program responds:
Processing package instance  from 

Aurora 40X, 80X, WMS 2000/3000 Asynchronous Driver
(sparc) 3.14
.
.
Using  as the package base directory.
## Processing package information.
## Processing system information.
## Verifying package dependencies.
Do you want to continue with the installation of  
[y,n,?]
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-
user permission during the process of installing this package.
Do you want to continue with the installation of  
[y,n,?]
Installing Aurora 40X, 80X, WMS 2000/3000 Asynchronous Driver as 

## Installing part 1 of 1.
/etc/rc2.d/S92AURAacsa
.
.
## Executing postinstall script.
Installation of  successful.
There is 1 more package to be installed.
Do you want to continue with installation [y,n,?] 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-50
9. Enter y
 The program responds:
10. Enter y
The program responds:
11 . E n t e r q
12. Enter eject cdrom
Processing package instance  from 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-51
Installing the Bay 
Networks Annex 
NTS Drivers
2
Overview2This procedure installs the NTS drivers. If your system is not using an 
NTS, skip this section
If you are reinstalling the NTS drivers, the options presented will differ 
slightly.
 Platform 
Considerations
2
lAll platforms.
Prerequisites2lThe Solaris 7 operating system must be installed.
lVerify that you are logged in as root at the console.
lObtain the “Annex Communication Server R10.0(B) Annex Host 
Tools” CD.
Procedure21. Load the “Annex Communication Server R10.0(B) Annex Host 
Tools” CD. 
2. After about 15 seconds, enter mount to verify the name of the 
CD-ROM. The program responds with a list of devices and file 
systems currently mounted. The last line should display the installed 
CD, as shown below:
3. Enter:
/cdrom/cdrom0/install
NOTE:
 . . . 
/cdrom/baynet_annex_system on /vol/dev/dsk/c0t2d0/baynet_annex_
system read only on (
current date and time) 
						

							  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-52
4. The program responds:
5. Press Enter
 The program responds:
6. Press Enter
 The program responds:
7. Press Enter
 The program responds:
8. Press Enter
 The program responds:
Do you want to continue (y/n/q=quit) [y]:
After installing one product you will be asked if you want 
to install the other product.
Indicate desired action:
1) Install Comm.Server Software
2) Install Annex Manager
3) Quit
Enter desired action [1]:
Enter the name of the Comm. Server Software installation 
directory.
Directory name [/usr/annex/cs_R10.0B]:
Comm. Server Software Installation Script
This installation shell script will examine your system and 
possibly ask you questions to generate the needed configuration 
to allow you to compile the Comm. Server host utilities.
.
Type carriage return to continue. Your cursor should be here-->
Where do you want the Annex utilities installed?
Utility directory [/usr/annex]: