Lexmark W820n User Manual
Have a look at the manual Lexmark W820n User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
149 46 Removing the optional mailbox To remove an optional mailbox and its stand, complete the following sections. Preparing for disassembly 1Turn the printer off. 2Remove all print media from all the bins. Disconnecting the power cords 1Unplug the printer power cord from the electrical outlet. 2Unplug the other end of the cord from the printer. Set the cord aside. Downloaded From ManualsPrinter.com Manuals
150 3Disconnect the mailbox cable from the back of the printer. Using the handling tool The handling tool is located at the back of the printer and mailbox. It rests in a cutout area tooled into the mailbox cover and attaches to the stand for the mailbox for safekeeping while not in use. The tool is used for lifting the mailbox off the printer. 1Locate the handling tool at the back of the mailbox. Press the button to the left of the tool to release it from the stand. Downloaded From ManualsPrinter.com Manuals
151 2Lift the handling tool up and pull it toward you. 3Open the mailbox door (Door D). 4Locate the area in the mailbox with two round metal tabs. 5Hold the handle of the tool as shown and align the two larger openings on the tool with the two round metal tabs. Downloaded From ManualsPrinter.com Manuals
152 6Slide the tool onto the tabs. 7Lift up slightly on the handle. The plastic tab near the metal tabssnapsinto place in the small opening on the tool. Large openingsMetal tabs Downloaded From ManualsPrinter.com Manuals
153 Removing the mailbox from the printer and stand 1Locate the latch on the horizontal bar. 2Pullforwardonthetabuntilitclicksinto place. CAUTION:The mailbox is heavy, and requires two people to lift it. Latch Ta b Horizontal bar Downloaded From ManualsPrinter.com Manuals
154 3Have someone help you lift the mailbox straight up off of the printer. Use the handling tool and the horizontal bar to grasp the mailbox. WARNING:Set the mailbox aside by resting the door of the mailbox on a flat surface; otherwise, you would damage the mailbox plastic deflector under the bins. Horizontal bar Handling tool Downloaded From ManualsPrinter.com Manuals
155 Removing the mailbox stand Two people are required to remove the upper portion of the mailbox stand. 1Locate the tab on each side of the stand. 2Push in on the tabs and lift the upper portion of the stand straight up. 3Set the upper portion of the stand aside. 4Remove the thumbscrews on the right and left side stand pieces. Save the thumbscrews. Right side stand piece (back view of printer) Downloaded From ManualsPrinter.com Manuals
156 5Lift up on the right side stand piece, and then pull it off of the printer. 6Set the right side stand piece aside. 7Remove the screw on the stabilizer bar. (Back view of printer) Downloaded From ManualsPrinter.com Manuals
157 8Slide the piece attached to the printer to the back until it falls off the printer. 9Lift the left side stand piece up, and then pull it off of the printer. 10Set the left side stand piece aside. 11At the back of the printer, locate the stabilizer foot under the high capacity feeder or printer stand. Downloaded From ManualsPrinter.com Manuals
158 12Pull the metal pin out of the stabilizer foot. Set it aside. 13Slide the stabilizer foot toward you. 14Reattach the stacking arm. SeeReinstalling the stacking armfor more information. 15Plug in the printer power cord. 16Turn the printer on. Downloaded From ManualsPrinter.com Manuals