Konica Minolta bizhub 362 User Manual

							2Before making copies
2-12 362/282/222
Before making copies
Chapter 2
Finisher FS-530/Output Tray OT-602/Punch Unit PU-501
Finisher FS-530
No.Part nameDescription
1Output tray 2
(elevated tray)Collects copies that are fed out
2Output tray 1
(non-sorted copy tray)Collects copies that are fed out
3 Lever FN1 Lowered when clearing paper misfeeds within 
the finisher
4 Dial  FN2 Turned when clearing paper misfeeds within the 
finisher
5 Hole-punch waste container Removed when emptying hole-punch waste 
that has accumulated from using the punch set-
tings
6 Lever FN3 Lowered when clearing paper misfeeds within 
the finisher
7 Lever FN4 Lowered when clearing paper misfeeds within 
the finisher
8 Staple cartridge holder Removed from the stapler unit when replacing 
the staple cartridge or clearing jammed staples
3
4
5 6 7 8 9 10 11
1 122
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies2
362/282/222 2-13
Before making copies
Chapter 2
Output Tray OT-602
Punch Unit PU-501
Parts marked with an asterisk (*) are installed within the finisher and therefore 
are not shown in the illustration.
Precautions for using the finisher:
-Do not place objects on top of the saddle stitcher or mailbin kit.
-Do not place objects below the output trays of the finisher.
9 Dial Turned to move the staple cartridge holder to-
ward you when replacing the staple cartridge or 
clearing jammed staples
10 Dial  FN5 Turned when clearing paper misfeeds within the 
finisher
11 Dial  FN6 Turned when clearing paper misfeeds within the 
finisher
No.Part nameDescription
12 Optional output tray Collects copies
No.Part nameDescription
13 Punch Unit* Punches holes for filing printed pages when 
punch unit is installed onto finisher
No.Part nameDescription
Downloaded From ManualsPrinter.com Manuals 
						

							2Before making copies
2-14 362/282/222
Before making copies
Chapter 2
Control panel
No.Part nameDescription
1 Touch panel Displays various screens and messages.
Specify the various settings by directly touching 
the panel.
2 [Access] key If user authentication or account track settings 
have been applied, press this key after entering 
the user name and password (for user authenti-
cation) or the account name and password (for 
account track) in order to use this machine.
3 [User Box] key Press to enter Box mode.
While the machine is in Box mode, the indicator 
on the [User Box] key lights up in green. For de-
tails, refer to the User’s Guide [Box Operations].
4 [Extra Scan] key Press to enter Extra Scan mode.
While the machine is in Extra Scan mode, the in-
dicator on the [Extra Scan] key lights up in 
green.
For details, refer to the User’s Guide [Network 
Scanner Operations] and the User’s Guide [Ad-
vanced Scan Operations].
5 [Fax/Scan] key Press to enter Fax/Scan mode.
While the machine is in Fax/Scan mode, the in-
dicator on the [Fax/Scan] key lights up in green.
For details, refer to the User’s Guide [Facsimile 
Operations] and the User’s Guide [Advanced 
Scan Operations].
6 [Copy] key Press to enter Copy mode. (As a default, the 
machine is in Copy mode.) While the machine is 
in Copy mode, the indicator on the [Copy] key 
lights up in green.
AccessibilityAccess
ABCDEF
JKL GHIMNO
TUV PQRSWXYZInterruptReset
Copy
Fax/Scan Extra/Scan User Box
Mode Memory
Mode Check
Main PowerStop Power
Proof Copy
StartUtility/Counter
Enlarge Display
Contrast
12
7
8
9
10
11
13 12 14 16
151718 19 20 21
34 56
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies2
362/282/222 2-15
Before making copies
Chapter 2
7 [Reset] key Press to clear all settings (except programmed 
settings) entered in the control panel and touch 
panel.
8 [Interrupt] key Press to enter Interrupt mode. While the ma-
chine is in Interrupt mode, the indicator on the 
[Interrupt] key lights up in green and the mes-
sage “Now in Interrupt mode.” appears on the 
touch panel. To cancel Interrupt mode, press 
the [Interrupt] key again.
9 [Power] (auxiliary power) key Press to turn on and off machine operations, for 
example, for copying, printing or scanning. 
When turned off, the machine enters a state 
where it conserves energy.
10 [Stop] key Press the [Stop] key during copying to stop the 
copy operation.
11 [Start] key Press to start copying. When this machine is 
ready to begin copying, the indicator on the 
[Start] key lights up in green. If the indicator on 
the [Start] key lights up in orange, copying can-
not begin.
Press to restart a stopped job. For details on 
jobs, refer to “Job List screens” on page 4-21
12 Main Power indicator Lights up in green when the machine is turned 
on with the main power switch
13 [Proof  Copy]  key Press to print a single proof copy to be checked 
before printing a large number of copies. (See 
page 4-5)
14 Keypad Use to type in the number of copies to be pro-
duced.
Use to type in the zoom ratio.
Use to type in the various settings.
15 [C] (clear) key Press to erase a value (such as the number of 
copies, a zoom ratio, or a size) entered using the 
keypad.
16 [Mode Check] key Press to display screens showing the specified 
settings.
17 [Utility/Counter] key Press to display the Utility/Counter screen.
18 [Mode Memory] key Press to register the desired copy settings as a 
program or to recall a registered copy program. 
(See page 4-8)
19 Contrast dial Use to adjust the contrast of the touch panel.
20 [Enlarge Display] key Press to enter Enlarge Display mode.
21 [Accessibility] key Press to display the screen for specifying user 
accessibility functions.
No.Part nameDescription
Downloaded From ManualsPrinter.com Manuals 
						

							2Before making copies
2-16 362/282/222
Before making copies
Chapter 2
2
Reminder 
Do not apply extreme pressure to the touch panel, otherwise it may be 
scratched or damaged.
Never push down on the touch panel with force, and never use a hard or 
pointed object to make a selection in the touch panel.
!
Detail 
A function other than a copy function cannot be selected while pages are 
being scanned for copying or while copying is paused.
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies2
362/282/222 2-17
Before making copies
Chapter 2
Basic settings screen (Basics screen)
When the machine is ready to begin making copies after being turned on, the 
Basics screen appears.
To activate a function or to select a setting, lightly touch the desired button 
in the touch panel.
No.Item nameDescription
1 Message display area The status of the machine and details on opera-
tions that must be performed are displayed 
here.
2 Functions/settings display Tabs and buttons for displaying screens con-
taining various functions are displayed.
Touch a tab or button to display the corre-
sponding screen for specifying the settings.
3 Status display area The amount of memory space available in addi-
tion to icons indicating the status of jobs and the 
machine are displayed.
4 [Mixed Original] button Touch to scan a document containing pages of 
different sizes. (See page 3-16)
5 [Finishing] button Touch to specify settings for sorting, grouping, 
stapling, or hole punching. (See page 3-50)
6 [Job List] button Jobs currently being performed or waiting to be 
performed can be checked. (See page 4-21)
7 [Save in User Box] button 
(Appears only when the hard disk 
drive is installed)Touch to save the data of scanned documents 
in boxes. The destination boxes can be created, 
file names can be specified, and saved docu-
ments can be printed.
For details, refer to the User’s Guide [Box Oper-
ations].
1
2
3 7
4 5 6
Downloaded From ManualsPrinter.com Manuals 
						

							2Before making copies
2-18 362/282/222
Before making copies
Chapter 2
Icons that appear in the screen
IconDescription
Indicates that copies are being made
Indicates that pages are being printed
Indicates that printing was stopped
Indicates that data is waiting to be printed
Indicates that computer data is being received
Indicates that computer data waiting to be printed remains
Indicates that the selected paper tray is empty
Indicates that the toner bottle must be replaced
Indicates that the imaging unit must be replaced
Indicates that the time for the periodic maintenance has passed on a ma-
chine that requires a periodic maintenance
Indicates that user authentication or account track settings have been 
specified on this machine
Indicates that copying was stopped when a proof copy is printed
Indicates that “Enhance Security” is set to “ON”
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies2
362/282/222 2-19
Before making copies
Chapter 2
Enlarging the touch panel screens
Press the [Enlarge Display] key. Then, touch the touch panel to display the 
selected area enlarged at the center of the panel. Press the [Enlarge Display] 
key again to return the screens to the standard size. The usual touch panel 
operations can be performed even when the screens are enlarged.
Touch in this 
area to scroll 
up and to the 
left.
Touch this 
arrow to scroll 
left. When the 
left edge of the 
screen is 
reached, the 
screen is 
scrolled down 
one line and 
the right edge 
is displayed.
Touch in this 
area to scroll 
down and to 
the left.Touch in this 
area to scroll 
up and to the 
right.
Touch this 
arrow to scroll 
right. When 
the right edge 
of the screen 
is reached, 
the screen is 
scrolled down 
one line and 
the left edge 
is displayed.
Touch in this
area to scroll
down and to
the right. Touch this arrow 
to scroll down.
When a button on the screen is touched to display a different screen, 
the screen returns to its standard size. However, touching the touch 
panel again displays the screen enlarged.Touch this arrow 
to scroll up.
Downloaded From ManualsPrinter.com Manuals 
						

							2Before making copies
2-20 362/282/222
Before making copies
Chapter 2
2.2 Adjusting the angle of the control panel
The control panel can be adjusted to any of three angles.
Adjust the control panel to the angle that allows for easy operation.
To adjust the angle of the control panel
1Pull the control panel re-
lease lever toward you, 
and then push down on 
the control panel.
 Upper position (base position)
 Middle position
 Lower position
Control panel release lever
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies2
362/282/222 2-21
Before making copies
Chapter 2
The control panel stops 
at the middle position.
2To adjust the control 
panel to an even steeper 
angle, pull the control 
panel release lever to-
ward you, and then push 
down on the control 
panel.
The control panel stops 
at the lower position.
3To return the control 
panel to the upper posi-
tion, pull the control pan-
el release lever toward 
you, and then pull up on 
the control panel.
Downloaded From ManualsPrinter.com Manuals