Konica Minolta bizhub 362 User Manual

							4Additional copy operations
4-2 362/282/222
Additional copy operations
Chapter 4
4 Additional copy operations
4.1 Checking the copy settings (Mode Check)
From the Check Job Details screens, the current copy settings can be 
checked and changed if desired.
To check the settings
1Press the [Mode Check] 
key.
Mode Check
Downloaded From ManualsPrinter.com Manuals 
						

							Additional copy operations4
362/282/222 4-3
Additional copy operations
Chapter 4
The Check Job Details 
screen appears.
Downloaded From ManualsPrinter.com Manuals 
						

							4Additional copy operations
4-4 362/282/222
Additional copy operations
Chapter 4
2After checking the settings, touch [Exit] or press the [Mode Check] key 
again.
The Basics screen appears again.
!
Detail 
There are four Check Job Details screens. The number of the currently 
displayed screen appears to the right of the screen title.
To display the previous screen, touch [Back]. To display the next screen, 
touch [Fwd].
If the setting for a function has been changed from the default, the button 
for that function appears selected.
To change the settings
1Press the [Mode Check] key.
2Touch [Back] or [Fwd] until the button for the function to be changed is 
displayed.
3Touch the button for the function whose setting is to be changed.
The screen for specifying the setting appears.
4Follow the appropriate procedure to change the setting.
Downloaded From ManualsPrinter.com Manuals 
						

							Additional copy operations4
362/282/222 4-5
Additional copy operations
Chapter 4
4.2 Printing a sample to check the settings (Proof Copy)
Before printing a large number of copies, a single proof copy can be printed 
to be checked. This prevents copy errors from occurring.
To make test prints
1Position the document to be copied. (Refer to page 3-8 for details.)
– The “Proof Copy” function can be used only if the machine has 
been set for 2 or more copies.
2Select the desired copy settings.
3Press the [Proof Copy] 
key.
A single proof copy is 
printed.
4Check the proof copy.
– If the proof copy was printed as desired, skip to step 8.
– To change the copy settings, continue with step 5.
5Touch [Change Setting] 
in the screen that ap-
peared when the proof 
copy was printed.
Proof Copy
Downloaded From ManualsPrinter.com Manuals 
						

							4Additional copy operations
4-6 362/282/222
Additional copy operations
Chapter 4
6In the Proof copy screen, 
change the copy set-
tings as desired.
– The Finishing set-
tings appear in the 
Proof copy screen 
only if they have 
been specified for 
the job being 
proofed. If the copy 
settings cannot be 
changed, stop print-
ing the proof copy. Next, press the [Reset] key to cancel the copy 
settings, and then specify the desired settings.
7Press the [Proof Copy] 
key to print another 
proof copy.
– If copying stops 
while the Proof copy 
screen is displayed 
or while changing 
settings after the 
proof copy was print-
ed, press the [Reset] 
key. A screen for 
stopping the job ap-
pears. Select the job to be deleted to delete the job.
– To stop the proof copy while scanning or printing, perform the op-
eration described in “Stopping/deleting a job” on page 3-63.
8Press the [Start] key.
The specified copy settings are queued as a job.
2
Note 
The number of copies printed for the proof copy is included in the number 
of copies that are specified. If the setting was changed, use the keypad 
to enter the number copies.
Downloaded From ManualsPrinter.com Manuals 
						

							Additional copy operations4
362/282/222 4-7
Additional copy operations
Chapter 4
4.3 Interrupting a copy job (Interrupt mode)
The current jobs can be temporarily interrupted so a document can be cop-
ied with different copy settings.
To interrupt a copy job
1Position the document to be copied. (Refer to page 3-8 for details.)
2Press the [Interrupt] key.
– If a job is being print-
ed, the message 
“Job is stopping.” 
appears.
The indicator on the [In-
terrupt] key lights up in 
green and printing of the 
current job stops.
?What happens if the [Interrupt] key is pressed while a document is 
being scanned?
%Pressing the [Interrupt] key returns all copy settings, except the 
number of copies, to their defaults.
3Select the desired copy settings.
4Press the [Start] key.
Printing begins for the job that the previous job was interrupted for.
5After the interrupting job has finished printing, press the [Interrupt] key.
The indicator on the [Interrupt] key goes off.
The copy settings return to those specified before printing was inter-
rupted.
2
Note 
If the interrupting job is cancelled, printing for the interrupted job auto-
matically restarts.
Interrupt
Downloaded From ManualsPrinter.com Manuals 
						

							4Additional copy operations
4-8 362/282/222
Additional copy operations
Chapter 4
4.4 Registering copy programs (Mode Memory)
Up to 10 copy programs can be registered.
The registered copy programs can be recalled and used for copying.
To register a copy program
1Using the touch panel and control panel keys, specify the copy settings 
to be registered in the copy program.
?Can the current settings be checked?
%To check the currently specified copy settings, press the [Mode 
Check] key.
2Press the [Mode Memo-
ry] key.
The Program screen ap-
pears.
3Touch [Set].
Mode Memory
Downloaded From ManualsPrinter.com Manuals 
						

							Additional copy operations4
362/282/222 4-9
Additional copy operations
Chapter 4
4Touch the button for the program number where a program is to be 
registered.
– If a program has not yet been registered with the program number 
button that is pressed, the empty icon disappears from the number 
button to indicate that a program is registered with it.
– If a program has al-
ready been regis-
tered with the 
program number 
button that is 
pressed, a message 
appears, requesting 
confirmation to over-
write the program. To 
overwrite the pro-
gram, touch [Yes], 
and then touch [En-
ter]. To cancel the registration, touch [No], and then touch [Enter].
?What if programs have already been registered to all of the program 
numbers?
%If there are no program numbers where no program has been reg-
istered yet, the program registered at a program number will be 
overwritten. To check the copy program settings before overwriting 
it, refer to “Checking the copy settings (Mode Check)” on page 4-2.
!
Detail 
To stop registering the program, press the [Reset] key or the [Mode Mem-
ory] key. No matter which screen is displayed, the registration is can-
celled.
No program registered Program registered
Downloaded From ManualsPrinter.com Manuals 
						

							4Additional copy operations
4-10 362/282/222
Additional copy operations
Chapter 4
To recall a copy program
The registered copy programs can be recalled and used for copying.
1Position the document to be copied. (Refer to page 3-8 for details.)
2Press the [Mode Memo-
ry] key.
The Program screen ap-
pears.
3Touch [Recall].
– To stop recalling a 
copy program, press 
the [Reset] key or the 
[Mode Memory] key.
?Can the specified 
settings for a copy 
program be 
checked?
%To check the pro-
gram copy settings 
before recalling the copy program, refer to “Checking the copy set-
tings (Mode Check)” on page 4-2.
4Touch the button for the program number registered with the desired 
copy settings.
The program copy settings are recalled, and the Basics screen appears 
again.
– If [Enter] is touched without touching a program number button, the 
Basics screen appears again and no copy program is recalled.
5Press the [Start] key.
Copying begins with the recalled copy settings.
Mode Memory
Downloaded From ManualsPrinter.com Manuals 
						

							Additional copy operations4
362/282/222 4-11
Additional copy operations
Chapter 4
To checking the copy settings
The copy settings to be registered as a copy program can be checked.
1Press the [Mode Memo-
ry] key.
The Program screen ap-
pears.
2Touch [Check].
3Touch the program 
number button regis-
tered with the copy set-
tings to be checked. 
The Check Program 
screen appears.
Mode Memory
Downloaded From ManualsPrinter.com Manuals