Konica Minolta bizhub 362 User Manual

							7Copy paper/original documents
7-20 362/282/222
Copy paper/original documents
Chapter 7
Downloaded From ManualsPrinter.com Manuals 
						

							8
Application functions
Chapter 8
Application functions
Downloaded From ManualsPrinter.com Manuals 
						

							8Application functions
8-2 362/282/222
Application functions
Chapter 8
8 Application functions
8.1 Adding cover pages (“Cover Mode” function)
Specify the paper to be used for the cover pages and add front and back 
cover pages to the copies.
In addition, the first and last pages of the document can be copied onto the 
cover pages.
Cover pageSettingDescription
Front  Cover With  Image The first page of the document is copied onto 
the front cover page.
Blank The front cover page is added at the begin-
ning of the copy.
Back Cover None A back cover page is not added.
With  Image The last page of the document is copied onto 
the back cover page.
Blank The back cover page is added at the end of 
the copy.
7
785
563
34
4
43
32
2
7
785
563
341
12
7
785
563
341
121
12
1
14
44
43
32
21
13
32
21
1
Single-sided
document
Double-sided
document
Cover pageWith the “Blank” 
setting With the “With Image” 
setting
Downloaded From ManualsPrinter.com Manuals 
						

							Application functions8
362/282/222 8-3
Application functions
Chapter 8
To copy using the “Cover Mode” function
0The “Cover Mode” function can be used only if the ADF is installed.
1Load the document into the ADF.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
– If the document contains more than 80 pages, refer to “Scanning a 
document in separate batches (“Separate Scan” setting)” on 
page 3-12.
2Load the paper for the cover pages and the paper for the main body of 
the document into separate paper trays.
– Use paper with the same size for the cover pages and for the main 
body of the document, and load them in the same orientation.
3Touch [Application], and 
then touch [Cover 
Mode].
– For details on load-
ing paper when using 
thick paper for the 
cover pages, refer to 
“Paper types and pa-
per capacities” on 
page 7-4 and “Load-
ing paper into the by-
pass tray” on 
page 2-60.
The Cover Mode screen appears.
4Select the desired cover 
page settings.
– To cancel the “Cover 
Mode” function, 
touch [OFF].
Downloaded From ManualsPrinter.com Manuals 
						

							8Application functions
8-4 362/282/222
Application functions
Chapter 8
5Touch the button under “Cover Paper”.
The Cover Paper screen appears.
6Select the paper tray 
loaded with the paper for 
the cover pages.
7Touch [Enter], and then touch [Enter] in the next screen that appears.
8Specify any other desired copy settings.
9Using the keypad, type in the desired number of copies.
10Press the [Start] key.
Copying begins.
Downloaded From ManualsPrinter.com Manuals 
						

							Application functions8
362/282/222 8-5
Application functions
Chapter 8
8.2 Inserting cover pages (“Insert Sheet” function)
Paper, such as colored paper, can be inserted into the copy as an insertion 
sheet.
Select either “With Image” or “Blank” to specify whether or not a page of the 
document is copied onto the insertion sheet.
4
43
34
44
43
32
2
7
785
563
341
12
1
12
21
13
32
21
1
7
785
563
341
12
7
78
25
563
341
12
Single-sided
document
Double-sided
documentWith the “Blank” 
setting
Insertion sheetWith the “With Image” 
setting
Downloaded From ManualsPrinter.com Manuals 
						

							8Application functions
8-6 362/282/222
Application functions
Chapter 8
To copy using the “Insert Sheet” function
0The “Insert Sheet” function can be used only if the ADF is installed.
1Insert a separator at the desired locations of the insertion sheets, and 
then load the document into the ADF.
– Insert paper separators with a different width than the document at 
the desired locations for the insertion sheets.
– For details on positioning the document, refer to “Copying docu-
ments of mixed sizes (“Mixed Original” setting)” on page 3-16.
– If the document contains more than 80 pages, refer to “Scanning a 
document in separate batches (“Separate Scan” setting)” on 
page 3-12.
2Load the paper for the insertion sheets and the paper for the main body 
of the document into separate paper trays.
– Use paper with the same size for the insertion sheets and for the 
main body of the document, and load them in the same orientation.
3Touch [Application], and 
then touch [Insert 
Sheet].
– For details on load-
ing paper when using 
thick paper for the in-
sertion sheets, refer 
to “Paper types and 
paper capacities” on 
page 7-4 and “Load-
ing paper into the by-
pass tray” on 
page 2-60.
The Insert Sheet screen appears.
7
78
2
5
563
34
8
87
76
65
54
43
3
1
12
2
21
1
Single-sided document
SeparatorDouble-sided document
Downloaded From ManualsPrinter.com Manuals 
						

							Application functions8
362/282/222 8-7
Application functions
Chapter 8
4Touch either [With Im-
age] or [Blank].
– If “With Image” is se-
lected, the page after 
the inserted separa-
tor is copied onto the 
insertion sheet. With 
double-sided copy-
ing, the two pages 
after the separator 
are copied onto the 
two sides of the in-
sertion sheet.
– If “Blank” is selected, the insertion sheet is added at the location 
where the separator was inserted.
– To cancel the “Insert Sheet” function, touch [OFF].
5Touch the button under “Insert Paper”.
The Cover Paper screen appears.
6Select the paper tray 
loaded with the paper for 
the insertion sheets.
7Touch [Enter], and then touch [Enter] in the next screen that appears.
8Specify any other desired copy settings.
9Using the keypad, type in the desired number of copies.
10Press the [Start] key.
Copying begins.
Downloaded From ManualsPrinter.com Manuals 
						

							8Application functions
8-8 362/282/222
Application functions
Chapter 8
8.3 Inserting paper between overhead projector trans-
parencies (“OHP Interleave” function)
In order to prevent copies printed onto overhead projector transparencies 
from sticking together as a result of the heat that is produced during copying, 
paper (interleaves) can be inserted between the transparencies.
Select either “With Image” or “Blank” to specify whether or not the copy is 
printed onto the interleaves.
To copy using the “OHP Interleave” function
0No Finishing setting can be used.
0The number of copies is set to “1” and cannot be changed.
1Position the document to be copied.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
2Load the overhead projector transparencies into the bypass tray, and 
load the interleaf paper into the desired paper tray.
– For details on loading overhead projector transparencies, refer to 
“Paper types and paper capacities” on page 7-4, “Loading paper 
into the bypass tray” on page 2-60, and “To specify a setting for 
special paper (Change Setting)” on page 7-15.
– Use interleaf paper with the same size as the overhead projector 
transparencies, and load them in the same orientation as the trans-
parencies.
EFGH
EFGH
EFGH EFGH
EFGH
EFGHEFGH
EFGH
EFGH EFGH
EFGH
EFGHEFGH
EFGH
EFGHEFGH
EFGH
EFGH EFGH
EFGH
EFGH
With the “Blank” 
setting With the “With Image” 
setting
Downloaded From ManualsPrinter.com Manuals 
						

							Application functions8
362/282/222 8-9
Application functions
Chapter 8
3Touch [Application], and 
then touch [OHP Inter-
leave].
The OHP Interleave 
screen appears.
4Touch either [With Im-
age] or [Blank].
– If “With Image” is se-
lected, the inter-
leaves are inserted, 
alternating with over-
head projector trans-
parencies, and the 
same document 
page is printed on a 
transparency and an 
interleaf.
– If “Blank” is selected, blank interleaves are inserted between the 
overhead projector transparencies.
– To cancel the “OHP Interleave” function, touch [OFF].
5Touch the button under “Interleaving Paper”.
6Select the paper tray 
loaded with the interleaf 
paper.
7Touch [Enter], and then touch [Enter] in the next screen that appears.
Downloaded From ManualsPrinter.com Manuals