Konica Minolta bizhub 362 User Manual

							8Application functions
8-30 362/282/222
Application functions
Chapter 8
– Touch [Custom Size] 
to display the Cus-
tom Size screen. 
Touch [X] or [Y], use 
the keypad to specify 
the size, and then 
touch [Enter].
– If “Inch (Fraction)” 
was selected as the 
measurement units, 
touch [X] or [Y] to po-
sition the cursor in 
the input box, and then touch   or   to specify the 
length. 
– A value outside the allowable range cannot be entered.
– To change the entered value, press the [C] (clear) key, and then en-
ter the correct value.
6Touch [Enter].
7Select the document ori-
entation.
– To cancel changes to 
the settings, touch 
[Cancel].
8Press the [Start] key.
The document is scanned, and the overlay image is stored.
2
Note 
The size of the scanned area appears on the button where the image is 
stored.
Downloaded From ManualsPrinter.com Manuals 
						

							Application functions8
362/282/222 8-31
Application functions
Chapter 8
To recall an overlay image
Stored overlay images can be recalled and printed overlapping copies.
0The “Image Overlay” function is available only if optional hard disk is in-
stalled.
1Position the document to be copied.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
2Touch [Application], and 
then touch [Image Set-
tings].
The Image Settings 
screen appears.
3Touch [Image Overlay].
– To cancel the Image 
Settings functions, 
touch [OFF].
The Image Overlay 
screen appears.
4Touch [Recall], and then 
touch the button for the 
number stored with the 
image.
– To cancel the “Image 
Overlay” function, 
touch [OFF].
Downloaded From ManualsPrinter.com Manuals 
						

							8Application functions
8-32 362/282/222
Application functions
Chapter 8
5Specify the printing po-
sition.
– Touch the button for 
positioning the over-
lay at the top, center 
or bottom.
6Select the desired setting under “Pages”.
– If “Pages” is set to “First page only”, the overlay image is only print-
ed overlapping the first page of the copy. If “All Pages” is selected, 
the overlay image is printed overlapping all pages.
– To cancel changes to the settings, touch [Cancel].
7Touch [Enter], and then touch [Enter] in the next two screens that ap-
pear.
8Specify any other desired copy settings.
9Using the keypad, type in the desired number of copies.
10Press the [Start] key.
Copying begins.
2
Note 
The size of the scanned area appears on buttons where an image is 
stored.
Downloaded From ManualsPrinter.com Manuals 
						

							Application functions8
362/282/222 8-33
Application functions
Chapter 8
To check the overlay image
The stored image can be printed from the Image Overlay screen or Store 
Overlay screen in order to be checked.
The following procedure describes how to check the image from the Image 
Overlay screen of the Application screen.
0The “Image Overlay” function is available only if optional hard disk is in-
stalled.
1Touch [Application], and 
then touch [Image Set-
tings].
– To check the image 
from the Store Over-
lay screen, display 
the Store Overlay 
screen, and then per-
form the same pro-
cedure starting from 
step 3. For details on 
displaying the Store 
Overlay screen, refer to “To store an overlay image (Store Overlay)” 
on page 8-28.
The Image Settings screen appears.
2Touch [Image Overlay].
– To cancel the Image 
Settings functions, 
touch [OFF].
The Image Overlay 
screen appears.
Downloaded From ManualsPrinter.com Manuals 
						

							8Application functions
8-34 362/282/222
Application functions
Chapter 8
3Touch [Check], and then 
touch the button for the 
number stored with the 
image.
– To cancel the “Image 
Overlay” function, 
touch [OFF].
4Select a paper tray load-
ed with paper.
– To cancel changes to 
the settings, touch 
[Cancel].
5Press the [Start] key.
The overlay image is printed.
2
Note 
The size of the scanned area appears on buttons where an image is 
stored.
Downloaded From ManualsPrinter.com Manuals 
						

							Application functions8
362/282/222 8-35
Application functions
Chapter 8
8.11 Copying with light and dark coloring inversed (“B/W 
Reverse” setting)
A document can be copied with the light and dark coloring or the black and 
white coloring (gradations) of the image inversed.
To copy using the “B/W Reverse” setting
1Position the document to be copied.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
2Touch [Application], and 
then touch [B/W Re-
verse].
– To cancel the “B/W 
Reverse” setting, 
touch [B/W Reverse] 
again to deselect it.
3Specify any other desired copy settings.
4Using the keypad, type in the desired number of copies.
5Press the [Start] key.
Copying begins.
Downloaded From ManualsPrinter.com Manuals 
						

							8Application functions
8-36 362/282/222
Application functions
Chapter 8
8.12 Separate scan
The machine can be set to continue scanning the document.
To scan documents continuously
%Touch [Application], and 
then touch [Separate 
Scan].
– To cancel the “Sepa-
rate Scan” setting, 
touch [Separate 
Scan] again to dese-
lect it.
!
Detail 
For details on continuously scanning documents, refer to “Scanning a 
document in separate batches (“Separate Scan” setting)” on page 3-12.
Downloaded From ManualsPrinter.com Manuals 
						

							9
Replacing toner bottles and staples and emptying punch waste containers
Chapter 9
Replacing toner bottles 
and staples and emptying 
punch waste containers
Downloaded From ManualsPrinter.com Manuals 
						

							9Replacing toner bottles and staples and emptying punch waste containers
9-2 362/282/222
Replacing toner bottles and staples and emptying punch waste containers
Chapter 99 Replacing toner bottles and staples and 
emptying punch waste containers
9.1 Replacing the toner bottle
When the toner is about to run out, the advanced warning message shown 
below appears.
!
Detail 
First, the message “Please exchange toner.” appears, and then the mes-
sage “There is no Toner.” appears and the machine stops operating. The 
number of pages that can be printed after the message “Please ex-
change toner.” appears and before the message “There is no Toner.” ap-
pears differs depending on the printing conditions, the consumables and 
the part to be replaced. After the first message appears, prepare to re-
place the toner bottle according to your maintenance agreement.
When the toner is empty, the warning message shown below appears and 
copies can no longer be made.
Downloaded From ManualsPrinter.com Manuals 
						

							Replacing toner bottles and staples and emptying punch waste containers9
362/282/222 9-3
Replacing toner bottles and staples and emptying punch waste containers
Chapter 9
2
Note 
When the message appears, replace the toner bottle according to your 
maintenance agreement.
!
Detail 
For details on replacing the toner bottle, refer to “To replace the toner 
bottle” on page 9-4.
7 CAUTION 
Handling toner and toner bottles
%Do not throw toner or the toner bottle into a fire.
%Toner expelled from the fire may cause burns.
7 CAUTION 
Precautions for toner spills
%Be careful not to spill toner inside the machine or get toner on your 
clothes or hands.
%If your hands become soiled with toner, immediately wash them with 
soap and water.
%If toner gets in your eyes, immediately flush them with water, and then 
seek professional medical attention.
2
Reminder 
Be sure to replace the toner bottle only after the message “There is no 
Toner.” appears.
Be sure to use toner bottles of the specified model, otherwise the ma-
chine may be damaged.
Downloaded From ManualsPrinter.com Manuals