Konica Minolta bizhub 362 User Manual

							6Specifications
6-10 362/282/222
Specifications
Chapter 6
Downloaded From ManualsPrinter.com Manuals 
						

							7
Copy paper/original documents
Chapter 7
Copy paper/original 
documents
Downloaded From ManualsPrinter.com Manuals 
						

							7Copy paper/original documents
7-2 362/282/222
Copy paper/original documents
Chapter 77 Copy paper/original documents
7.1 Copy paper
Use paper that meets the following specifications.
Possible paper sizes
Non-standard-sized paper:
Standard-sized paper:
Paper sourcePaper widthPaper length
Bypass tray 3-1/2 to 11-3/4 5-1/2 to 17
1st tray — —
2nd tray
3rd tray
4th tray
LCT
Double-sided copies — —
Paper sourcePaper size
Bypass tray A3 w, B4 w, A4 v, B6 w, 8-1/2 × 13 w, 11 × 17 w to 5-1/2 × 8-1/
2 w/v, Legal w, Letter w/v, Executive w/v
1st tray A3 w, B4 w to B5 w, 8-1/2 × 13 w, 11 × 17 w to 5-1/2 × 8-1/2 w/
v, Legal w, Letter w/v
2nd tray
3rd tray 11 × 17 w, Legal w, Letter w/v, 5-1/2 × 8-1/2 w
4th tray
LCT Letter v
Double-sided copies 11 × 17 w, Legal w, Letter w/v, 5-1/2 × 8-1/2 w
Loaded equipmentPaper sizes that can be loaded
Finisher (FS-530) Output tray 1, 2 and optional output tray
3-1/2 × 5-1/2 to 11-3/4 × 17
“Group”/“Sort” settings: 7-1/4 × 5-1/2 to 11-3/4 × 17
Staple settings: 7-1/4 × 7-1/4 to 11-3/4 × 17
Punch settings: 8-1/2 × 7-3/16 to 11-11/16 × 17 (with the “2-Hole” 
punch setting), 11 × 7-3/16 to 11-11/16 × 17 (with the “3-Hole” 
punch setting)
*2
Output tray (OT-602)
Downloaded From ManualsPrinter.com Manuals 
						

							Copy paper/original documents7
362/282/222 7-3
Copy paper/original documents
Chapter 7
*1 There are four Foolscap sizes: 8-1/2 × 13 w*1, 8-1/4 × 13 w*1, 8 × 13 w*1 
and 8-5/8 × 13 w*1. Any one of these sizes can be selected. For details, con-
tact your technical representative.
*2 Can be used when optional punch unit is installed on finisher
Saddle stitcher (SD-507) Folding/binding: A3 w, B4 w, A4 w, B5 w, 11 × 17 w, 11 × 14 w, 
Letter w, 7-1/4 × 10 to 11-3/4 × 17
Mailbin kit (MT-502) 7-1/4 × 7-1/4 to 11-3/4 × 11-3/4
Punch settings: 7-1/4 × 7-1/4 to 11-3/4 × 11-3/4 (with the “2-Hole” 
punch setting), 11 × 7-1/6 to 17 × 17 (with the “3-Hole” punch set-
ting) 
*2
Job separator (JS-502) 11 × 17 w, 11 × 14 w, Legal w, Letter w/v, 5-1/2 × 8-1/2 w/v
Copy output tray (stand-
ard)A3 w, B4 w to A5 w, A6 w, 8-1/2 × 13 w
*1, 11 × 17 w, 11 × 14 
w, Legal w, Letter w/v, Executive w/v, Invoice w/v, 
non-standard sizes, 5-1/2 × 8-1/2 w/v
Loaded equipmentPaper sizes that can be loaded
Downloaded From ManualsPrinter.com Manuals 
						

							7Copy paper/original documents
7-4 362/282/222
Copy paper/original documents
Chapter 7
Paper types and paper capacities
Paper typePlain paperThick paperThin paperRecycled pa-
per
Weight (lb)15 lb
to
24 lb24-1/4 lb
to
55-3/4 lb13-1/4 lb
to
14-3/4 lb15 lb
to
24 lb
Paper source
Bypass tray 150 sheets 50 sheets 150 sheets 150 sheets
1st tray 500 sheets — — 500 sheets
2nd tray 500 sheets 500 sheets
3rd tray 500 sheets 500 sheets
4th tray 500 sheets 500 sheets
LCT 2,500 sheets 2,500 sheets
Double-sided copieso——o
Paper typeOverhead
projector
transparenci-
esPostcardsEnvelopesLabel sheets
Paper source
Bypass tray 50 sheets 50 sheets 10 sheets 50 sheets
1st tray — — — —
2nd tray
3rd tray
4th tray
LCT
Double-sided copies — — — —
Downloaded From ManualsPrinter.com Manuals 
						

							Copy paper/original documents7
362/282/222 7-5
Copy paper/original documents
Chapter 7
Special paper
Paper other than plain paper, such as overhead projector transparencies and 
recycled paper, is called special paper. Be sure to select a special paper set-
ting for paper trays loaded with media such as overhead projector transpar-
encies and recycled paper in order to prevent operating errors.
Paper typeIconDescription
OHP Select this setting when overhead projector transpar-
encies are loaded.
A paper tray with this setting is not automatically se-
lected when the “Auto Paper Select” setting is spec-
ified or when the paper trays are switched 
automatically.
Thick Select this setting when thick paper with a weight of 
24-1/4 lb to 55-3/4 lb is loaded.
A paper tray with this setting is not automatically se-
lected when the “Auto Paper Select” setting is spec-
ified or when the paper trays are switched 
automatically.
Thin Select this setting when thin paper with a weight of 
13-1/4 lb to 14-3/4 lb is loaded.
A paper tray with this setting is not automatically se-
lected when the “Auto Paper Select” setting is spec-
ified or when the paper trays are switched 
automatically.
Envelope Select this setting when envelopes are loaded.
A paper tray with this setting is not automatically se-
lected when the “Auto Paper Select” setting is spec-
ified or when the paper trays are switched 
automatically.
Single Sided Only Select this setting when the paper that is loaded 
should not be used with double-sided copying (for 
example, when one side has already been printed 
on).
A paper tray with this setting is given priority when 
the “Auto Paper Select” setting is specified.
A paper tray with this setting is not automatically se-
lected during double-sided copying.
Recycled Select this setting when the paper that is loaded 
should not be given priority, for example, when recy-
cled paper is loaded.
A paper tray with this setting is not automatically se-
lected when the “Auto Paper Select” setting is spec-
ified.
Special Paper Select this setting when the paper that is loaded is 
from a particular manufacturer or special paper that 
is not usually used.
A paper tray with this setting is not automatically se-
lected when the “Auto Paper Select” setting is spec-
ified or when the paper trays are switched 
automatically.
Downloaded From ManualsPrinter.com Manuals 
						

							7Copy paper/original documents
7-6 362/282/222
Copy paper/original documents
Chapter 7
!
Detail 
The available special paper settings differ for each paper tray.
The settings for overhead projector transparencies, thick paper, thin pa-
per and envelopes can be specified only for the bypass tray. For details 
on specifying the settings for overhead projector transparencies, thick 
paper, thin paper and envelopes for the bypass tray, refer to “To specify 
a setting for special paper (Change Setting)” on page 7-15.
For details on specifying the settings for paper only for single-sided cop-
ying, for recycled paper and for special paper, refer to “Special Paper 
Setting” on page 11-12.
Precautions for paper
The following types of paper should not be used, otherwise decreased print 
quality, paper misfeeds or damage to the machine may occur.
-Overhead projector transparencies that have already been fed through 
the machine (even if the transparency is still blank)
-Paper that has been printed on by a heat-transfer printer or an inkjet 
printer
-Paper that is either extremely thick or extremely thin
-Folded, curled, wrinkled, or torn paper
-Paper that has been left unwrapped for a long period of time
-Damp paper, perforated paper, or paper with punched holes
-Extremely smooth or extremely rough paper, or paper with an uneven 
surface
-Paper that has been treated, such as carbon-backed, heat-sensitive or 
pressure-sensitive paper
-Paper that has been decorated with foil or embossing
-Paper of a non-standard shape (not rectangular)
-Paper that is bound with glue, staples or paper clips
-Paper with labels attached
-Paper with ribbons, hooks, buttons, etc., attached
Paper storage
Observe the following precautions when storing the paper.
-Store paper in a cool, dark location with little humidity.
-If the paper becomes damp, paper misfeeds may occur. Paper that has 
not been loaded should be kept wrapped or placed in a plastic bag and 
stored in a cool, dark location with little humidity.
-Store the paper laying flat, not standing on its edge. Curled paper may 
cause paper misfeeds.
-Keep paper out of the reach of children.
Downloaded From ManualsPrinter.com Manuals 
						

							Copy paper/original documents7
362/282/222 7-7
Copy paper/original documents
Chapter 7
Automatic paper-tray-switching feature
If the selected paper tray runs out of paper while a job is being printed and a 
different paper tray is loaded with paper meeting the following conditions, 
the other paper tray is automatically selected so printing can continue. If the 
optional LCT is installed, a maximum of 3,650 copies (with Letter v paper) 
can be made continuously.
Operating Conditions
-The paper is the same size.
-The paper is positioned in the same orientation.
-The paper is the same type.
Order for selecting the paper trays
As a factory default, when a different paper tray is automatically selected, the 
next paper tray in the following list is chosen.
1st tray → 2nd tray → 3rd tray/LCT → 4th tray → Bypass tray
Downloaded From ManualsPrinter.com Manuals 
						

							7Copy paper/original documents
7-8 362/282/222
Copy paper/original documents
Chapter 7
7.2 Specifying paper settings for the bypass tray
This section describes the procedures for specifying the size and type of pa-
per loaded in the bypass tray.
!
Detail 
For details on loading the paper into the bypass tray, refer to “Loading 
paper into the bypass tray” on page 2-60.
To specify the paper size (Change Setting)
Standard paper sizes can be specified for the paper loaded into the bypass 
tray.
This is useful, for example, when the size of the paper that is loaded cannot 
be automatically detected (such as with paper in inch sizes).
1Load the paper into the bypass tray.
2In the Basics screen, 
touch [Paper].
The Paper screen ap-
pears.
3Select the button for the 
bypass tray.
4Touch [Change Setting].
Downloaded From ManualsPrinter.com Manuals 
						

							Copy paper/original documents7
362/282/222 7-9
Copy paper/original documents
Chapter 7
5Select the size of paper 
loaded into the bypass 
tray.
?How can the size of 
paper loaded into the 
bypass tray be se-
lected?
%For details, refer to 
“To specify a setting 
for special paper 
(Change Setting)” on 
page 7-15.
6Touch [Enter].
The Paper screen appears again.
The paper size for the bypass tray is set.
2
Reminder 
If paper other than the specified paper size is loaded, a paper misfeed 
may occur since the paper size is not automatically detected.
Downloaded From ManualsPrinter.com Manuals