HP LaserJet 9059 MFP User Manual

							Clear jams inside the right door1.Open the right door.
Figure 12-10   Clear jams inside the right door (1 of 3)
2.Check for media in the right door area, and remove any media from this area. Carefully check to
be sure you have removed all pieces of torn media.
3. Open the jam access cover. Pull out and lift the green tab.
Figure 12-11   Clear jams inside the right door (2 of 3)
4.Remove any media from this area by pulling it out of the MFP.
5. Push the green lever down to the original position.
Figure 12-12   Clear jams inside the right door (3 of 3)
6.Close the right door.
ENWW Clear jams 187
 
						

							Clear jams in trays 2 and 31.Open the tray until it stops.
Figure 12-13   Clear jams in trays 2 and 3 (1 of 3)
2.Check for media in the tray area, and remove any media from this area. Carefully check to be sure
you have removed all pieces of torn media.
3. Close the tray.
Figure 12-14   Clear jams in trays 2 and 3 (2 of 3)
4.Open the right door, remove any visible media, and close the right door. This resets the MFP.
Figure 12-15   Clear jams in trays 2 and 3 (3 of 3)
Clear jams in tray 4
1.Open the vertical transfer door on tray 4.
Figure 12-16   Clear jams in tray 4 (1 of 4)
2.Check for paper in this area, and remove any paper from this area. Carefully check to be sure that
you have removed all pieces of torn paper.
188 Chapter 12   Problem solve ENWW
 
						

							3.If you did not see any paper in the vertical transfer door, open tray 4.
Figure 12-17   Clear jams in tray 4 (2 of 4)
4.Check for paper in the tray area, and remove any paper from this area. Carefully check to be sure
you have removed all pieces of torn paper.
5. Close tray 4.
Figure 12-18   Clear jams in tray 4 (3 of 4)
6.Close the vertical transfer door.
Figure 12-19   Clear jams in tray 4 (4 of 4)
Clear jams from the output areas
Clear jams in the stacker or stapler/stacker 
1.If the jam extends into the output bins, slowly and carefully pull the media straight out of the MFP
so that it does not tear.
Figure 12-20   Clear jams in the stacker or stapler/stacker (1 of 7)
ENWW Clear jams 189
 
						

							2.Move the output device away from the MFP.
Figure 12-21   Clear jams in the stacker or stapler/stacker (2 of 7)
3.On the stacker, lift the wire on the lower bin of the device, and carefully pull out any media from
this area. On the stapler/stacker, carefully pull out any media that might be protruding from the
accumulator area.
NOTE: Only the stacker has the wire on the lower bin.
Figure 12-22   Clear jams in the stacker or stapler/stacker (3 of 7)
4.Locate the green handle in the flipper area and lift the handle.
Figure 12-23   Clear jams in the stacker or stapler/stacker (4 of 7)
5.Carefully pull out any media from the flipper area.
Figure 12-24   Clear jams in the stacker or stapler/stacker (5 of 7)
WARNING! Avoid touching the flipper area. It can be hot.
190 Chapter 12   Problem solve ENWW
 
						

							6.Locate the green handle in the paper path module, and then pull down on the handle.
Figure 12-25   Clear jams in the stacker or stapler/stacker (6 of 7)
7.Carefully pull out any media from the paper path module.
8. Close all open doors. Push the output device back into place.
Figure 12-26   Clear jams in the stacker or stapler/stacker (7 of 7)
Clear jams in the paper-path area of the multifunction finisher
1.Open the top cover.
Figure 12-27   Clear jams in the paper-path area of the multifunction finisher (1 of 3)
2.Slowly and carefully pull the paper straight out of the finisher so that it does not tear.
Figure 12-28   Clear jams in the paper-path area of the multifunction finisher (2 of 3)
ENWW Clear jams 191
 
						

							3.Close the finisher cover.
Figure 12-29   Clear jams in the paper-path area of the multifunction finisher (3 of 3)
Clear jams in between the multifunction finisher and the MFP
1.Move the finisher away from the MFP.
Figure 12-30   Clear jams in between the multifunction finisher and the MFP (1 of 4)
2.Carefully remove any paper from the MFP output area.
Figure 12-31   Clear jams in between the multifunction finisher and the MFP (2 of 4)
3.Carefully remove any paper from the finisher input area.
Figure 12-32   Clear jams in between the multifunction finisher and the MFP (3 of 4)
192 Chapter 12   Problem solve ENWW
 
						

							4.Push the multifunction finisher back into place.
Figure 12-33   Clear jams in between the multifunction finisher and the MFP (4 of 4)
Clear booklet jams in the multifunction finisher
1.Move the finisher away from the MFP.
Figure 12-34   Clear booklet jams in the multifunction finisher (1 of 7)
2.If paper is jammed in the finisher input area but has not entered the folding rollers, carefully remove
the paper from the input area and then skip to step 7.
Figure 12-35   Clear booklet jams in the multifunction finisher (2 of 7)
3.Open the back door on the finisher. If jammed paper inside the finisher has not entered the folding
rollers, remove the paper and then skip to step 7. If the paper has entered the folding rollers,
proceed to step 4.
Figure 12-36   Clear booklet jams in the multifunction finisher (3 of 7)
ENWW Clear jams 193
 
						

							4.Open the stapler-unit door.
Figure 12-37   Clear booklet jams in the multifunction finisher (4 of 7)
5.Turn the bottom green knob clockwise to advance the jammed paper through the folding rollers
and into the booklet bin.
Figure 12-38   Clear booklet jams in the multifunction finisher (5 of 7)
6.Close the stapler-unit door.
Figure 12-39   Clear booklet jams in the multifunction finisher (6 of 7)
7.Push the multifunction finisher back into place.
Figure 12-40   Clear booklet jams in the multifunction finisher (7 of 7)
194 Chapter 12   Problem solve ENWW
 
						

							Clear a staple jam from the multifunction finisher1.Open the stapler-unit door.
Figure 12-41   Clear a staple jam from the multifunction finisher (1 of 11)
2.Slide the stapler unit toward you.
Figure 12-42   Clear a staple jam from the multifunction finisher (2 of 11)
3.Turn the large green knob until you see the blue dot (this indicates that the stapler is fully open).
Figure 12-43   Clear a staple jam from the multifunction finisher (3 of 11)
4.Turn the small green knob at the top of the stapler unit clockwise until the staple cartridge moves
to the left of the stapler unit.
Figure 12-44   Clear a staple jam from the multifunction finisher (4 of 11)
CAUTION:The blue dot must appear in the window of the stapler unit before you remove the
staple cartridge. If you try to remove the staple cartridge before the blue dot appears in the window,
you could damage the device.
ENWW Clear jams 195
 
						

							5.Remove the staple cartridge.
Figure 12-45   Clear a staple jam from the multifunction finisher (5 of 11)
6.Pull up on the lever labeled with a green dot.
Figure 12-46   Clear a staple jam from the multifunction finisher (6 of 11)
7.Remove the damaged staple.
Figure 12-47   Clear a staple jam from the multifunction finisher (7 of 11)
8.Press down on the lever labeled with a green dot.
Figure 12-48   Clear a staple jam from the multifunction finisher (8 of 11)
196 Chapter 12   Problem solve ENWW