HP LaserJet 9059 MFP User Manual

							Set the default copy options
You can use the administration menu to establish default settings that apply to all copy jobs. If necessary,
you can override most settings for an individual job. After that job is complete, the device returns to the
default settings.
1.From the Home screen, scroll to and touch  Administration.
2. Touch  Default Job Options , and then touch Default Copy Options .
3. Several options are available. You can configure defaults for all options, or for only some options.
For information about each option, see 
Adjust the copy settings on page 119. The built-in Help
system also provides an explanation of each option. Touch the  Help button (
) in the upper-right
corner of the screen.
4. To exit the administration menu, touch the  Home button (
) in the upper-left corner of the screen.
ENWW Set the default copy options 117
 
						

							Basic copy instructions
This section provides the basic instructions for copying.
Copy from the scanner glass
Use the scanner glass to make as many as 999 copies of small, lightweight media or heavy media. This
includes media such as receipts, newspaper clippings, photographs, old documents, worn documents,
and books.
Place original documents face-down on the glass. Align the corner of the original with the upper-left
corner of the glass.
To make copies by using the default copy options, use the numeric keypad on the control panel to select
the number of copies, and press Start. To use customized settings, touch  Copy. Specify the settings,
and then press Start . For more information about using customized settings, see 
Adjust the copy settings
on page 119.
Copy from the document feeder
Use the document feeder to make as many as 999 copies of a document that has up to 50 pages
(depending on the thickness of the pages). Place the document into the document feeder with the pages
facing down.
To make copies by using the default copy options, use the numeric keypad on the control panel to select
the number of copies, and press  Start. To use customized settings, touch  Copy. Specify the settings,
and then press Start . For more information about using customized settings, see 
Adjust the copy settings
on page 119.
118 Chapter 8   Copy ENWW
 
						

							Adjust the copy settings
The device offers several features so you can optimize copied output. These features are all available
on the Copy screen.
The  Copy  screen consists of several pages. From the first page, touch  More Options to go to the next
page. Then touch the up or down arrow buttons to scroll to other pages.
For details about how to use an option, touch the option, and then touch the help (
) button in the upper-
right corner of the screen. The following table provides an overview of the copy options.
NOTE: Depending on how the system administrator has configured the device, some of these options
might not appear. The options in the table are listed in the order in which they can appear.
Option nameDescription
SidesUse this feature to indicate whether the original document is printed on one or both sides, and
whether the copies should be printed on one or both sides.
Reduce/EnlargeUse this feature to reduce or  enlarge the copied image on the page.
Staple/Collate or CollateIf the optional HP Stapler/Stacker or HP  Multifunction Finisher is attached, the Staple/Collate
option is available. Use this feature to set up options for stapling and assembling the pages in
sets of copies.
If the optional HP Stapler/Stacker or HP Multifunction Finisher is not attached, the  Collate option
is available. Use this feature to assemble each set of copied pages in the same order as the
original document.
Paper SelectionUse this feature to select the tray that holds the size and type of paper that you want to use.
Image AdjustmentUse this feature to improve the overall quality  of the copy. For example, you can adjust the
darkness and sharpness, and you can use the  Background Cleanup setting to remove faint
images from the background or to remove a light background color.
Content OrientationUse this feature to specify the way the content of the original page is placed on the page: portrait
or landscape.
Output BinUse this feature to select an output bin for the copies.
Optimize Text/PictureUse this feature to optimize the output for a  particular type of content. You can optimize the
output for text or printed pictures, or you can manually adjust the values.
Pages per SheetUse this feature to copy multiple pages onto one sheet of paper.
Original SizeUse this feature to describe the page size of the original document.
Booklet FormatUse this feature to copy two or more pages onto one sheet of paper so you can fold the sheets
in the center to form a booklet.
Edge-To-EdgeUse this feature to avoid shadows that can appear along the edges of copies when the original
document is printed close to the edges. Combine this feature with the  Reduce/Enlarge feature
to ensure that the entire page is printed on the copies.
Job Build Use this feature to combine several sets of original documents into one copy job. Also use this
feature to copy an original document that has more pages than the document feeder can
accommodate at one time.
ENWW Adjust the copy settings 119
 
						

							Copy two-sided documents
Two-sided documents can be copied manually or automatically.
Copying two-sided documents manually
Copies resulting from this procedure are printed on one side, and need to be hand-collated.
1.Load the documents to be copied into the document feeder input tray with the first page facing
down, and with the top of the page leading into the document feeder.
2. Touch  Start Copy . The odd-numbered pages are copied and printed.
3. Remove the stack from the document feeder output tray and reload the stack with the last page
facing down, and with the top of the page leading into the document feeder.
4. Touch  Start Copy . The even-numbered pages are copied and printed.
5. Collate the odd- and even-numbered printed copies.
Figure 8-2   Collate copies
Copy two-sided documents automatically
The default copy setting is one-sided to one-sided. Use the following procedures to change the setting
so you can copy from or to documents that are two-sided.
Make two-sided copies from one-sided documents 1.Load the documents to be copied into the document feeder with the first page facing down, and
with the top of the page leading.
2. On the control panel, touch  Copy.
3. Touch  Sides.
4. Touch  1-sided original, 2-sided output .
5. Touch  OK.
6. Touch  Start Copy .
Make two-sided copies from two-sided documents 1.Load the documents to be copied into the document feeder with the first page facing down, and
with the top of the page leading.
2. On the control panel, touch  Copy.
3. Touch  Sides.
120 Chapter 8   Copy ENWW
 
						

							4.Touch  2-sided original, 2-sided output .
5. Touch  OK.
6. Touch  Start Copy .
Make one-sided copies from two-sided documents 1.Load the documents to be copied into the document feeder with the first page facing down, and
with the top of the page leading.
2. On the control panel, touch  Copy.
3. Touch  Sides.
4. Touch  2-sided original, 1-sided output .
5. Touch  OK.
6. Touch  Start Copy .
ENWW Copy two-sided documents 121
 
						

							Copy mixed-size originals
You can copy original documents that are printed on different sizes of paper as long as the sheets of
paper have one common dimension. For example, you could combine letter and legal sizes, or you could
combine A4 and A5 sizes.
1.Arrange the sheets in the original document so they all have the same width.
2. Place the sheets face-down into the document feeder, and adjust both paper guides against the
document.
3. From the Home screen, touch  Copy.
4. Touch  Original Size .
NOTE:If this option is not on the first screen, touch  More Options until the option appears.
5.Select  Mixed Ltr/Lgl, and then touch  OK.
6. Touch  Start Copy .
122 Chapter 8   Copy ENWW
 
						

							Change the copy-collation setting
You can set the device to automatically collate multiple copies into sets. For example, if you are making
two copies of three pages and the automatic collation is on, the pages print in this order: 1,2,3,1,2,3. If
automatic collation is off, the pages print in this order: 1,1,2,2,3,3.
To use the automatic collation, the original document size must fit into the memory. If it does not, the
device makes only one copy and a message appears notifying you of the change. If that happens, use
one of the following methods to finish the job:
●Split the job into smaller jobs that contain fewer pages.
● Make only one copy of the document at a time.
● Turn off the automatic collation.
The collation setting you select is in effect for all copies until you change the setting. The default setting
for automatic copy collation is  On.
1. On the control panel, touch  Copy.
2. Touch  Staple/Collate  or Collate .
3. Touch  Off.
4. Touch  OK.
ENWW Change the copy-collation setting 123
 
						

							Copy photos and books
Copy a photo 
NOTE:Photos should be copied from the flatbed scanner, not from the document feeder.
1.Lift the lid and place the photo on the flatbed scanner with the picture-side down and the upper-
left corner of the photo in the upper-left corner of the glass.
2. Gently close the lid.
3. Touch  Start Copy .
Copy a book 1.Place the book face down on the glass with the top edge toward the rear of the glass. Align the
book spine with the book icon 
 along the top edge of the glass.
2. Touch  Copy.
3. Scroll to and touch  Book Copy.
4. Touch  Book Copy On  and then touch  OK.
5. Select the number of copies to make and adjust other settings as needed.
6. Touch Start Copy, or press the Start button on the control panel.
7. Select which pages of the book should be copied:
●Copy both pages
 copies the images on both the left and right side of the spine
● Skip left page
 copies the image on the right side of the spine only
● Skip right page
 copies the image on the left side of the spine only
8. Touch  Scan.
9. After the last page is scanned, touch  Finish.
124 Chapter 8   Copy ENWW
 
						

							Combine copy jobs by using Job Build
Use the Job Build feature to build a single copy job from multiple scans. You can use either the document
feeder or the scanner glass. The settings for the first scan are used for subsequent scans.
1.Touch  Copy.
2. Scroll to and touch  Job Build.
3. Touch  Job Build On .
4. Touch  OK.
5. If necessary, select the desired copy options.
6. Touch  Start Copy . After each page is scanned, the control panel prompts you for more pages.
7. If the job contains more pages, load the next page, and then touch  Scan.
The product temporarily saves all the scanned images. The product will begin printing copies when
it has enough information to begin. Touch Finished  to finish printing the copies.
NOTE:In Job Build, if you scan the first page of a document by using the document feeder, then you
must scan all of the pages in that document by using the document feeder. If you scan the first page of
a document by using the scanner glass, then you must scan all of the pages in that document by using
the scanner glass.
ENWW Combine copy jobs by using Job Build 125
 
						

							Cancel a copy job
To cancel the copy job that is currently running, touch Stop on the control panel. This pauses the device.
Then touch  Cancel Current Job.
NOTE:If you cancel a copy job, clear the document from the flatbed scanner or from the automatic
document feeder.
126 Chapter 8   Copy ENWW