GTE Omni Si Database Technical Practices Issue 1 Manual

							TL-130100-1001
STEPOPERATIONRESULT5
6(e) Camped-on station does not hear
burst of camp-on tone.
(f) TOD displayed.
Before time out occurs, place station(a) Trunk receives ringback tone.
on-hook.(b) Camped-on station receives ringing.
Answer camp-on call at station.(a) 
Ringback tone to trunk stops.
(b) Ringing stops.
(c) Transmission established between
trunk and station.
7Go on-hook.(a) Station returns to idle state.
(b) Trunk returns to idle state.
4.13.3Attendant Camp-On Not Equipped
STEPOPERATIONRESULT
1Incoming CO trunk call received.(a) Ringing heard.
(b) LOOP LED (l-4) flashes at 120 IPM.
2Depress flashing LED LOOP
pushbutton. (l-4)(a) Depressed LOOP LED on.
(b) “LOCAL” appears in fixed display field.
(c) Trunk number appears in variable
display field.
(d) START/STOP LED on.
(e) POS RLSE LED on.
(f) Ringing stops.
(g) Transmission is established between
trunk and attendant.
3
4
5210Dial number of station known to be
busy.(a) EXCL SRCE LED on.
(b) Dialed digits displayed in fixed display.
(c) START/STOP LED off.
(d) 60-IPM busy tone heard.
Depress the CAMP-ON pushbutton on(a) Message indicating that camp-on
Attendant Console not equipped withdenied displayed.
camp-on.(b) Camped-on station does not hear burst
of camp-on tone.
(c) CAMP-ON LED remains on while
depressed.
8187o-1 77 
						

							TL-130100-1001STEPOPERATIONRESULT
5Depress POS RLSE pushbutton.(a) POS RLSE LED off.
(b) LOOP LED off.
(c) TOD displayed.
(d) EXCL SRCE off.
(e) Fixed display cleared.
4.14
Answering Station Recall and Transferring to Inside Party
STEPOPERATIONRESULT
1Incoming call to Attendant Console
has been extended to a station,
and station is now recalling by
flashing hookswitch and dialing
attendant access code.
2Depress flashing LOOP LED
pushbutton to answer recalling
party.
NOTE:If the station releases connection before attendant answers, type-of-call display
indicates TRANSFER, and trunk- and station-number display indicates number of
trunk or station that originated call.
3Depress EXCL DEST pushbutton.
4Recalling party requests attendant toTwo-way call established.
transfer trunk party to another station
and places station on-hook.
5Depress START/STOP pushbutton.
6Dial requested station number
O-1788187LOOP LED flashes at 60 IPM.
(a) LOOP LED on.
(b) POS RLSE LED on.
(c) Type-of-call display indicates
“TRANSFER”.
(d) Recalling station number displayed.
(e) Class-of-service digits displayed.
(f) EXCL DEST LED on.
(a) Three-way call established.
(b) EXCL DEST LED off.
(a) Dial tone heard.
(b) START/STOP LED on.
(c) EXCL SRCE LED on.
(d) Fixed display cleared.
(a) START/STOP pushbutton LED off.
(b) 
Ringback tone heard.
(c) Dialed digits appear on fixed display.
5210 
						

							- -TL-130100-1001
STEPOPERATIONRESULT
NOTE:
In case of misdial, depress DEST RLS pushbutton and then depress START/STOPpushbutton again. When dial tone heard, dial correct station number.
7Depress POS RLSE pushbutton torelease call. Attendant does not
need to remain with call until
called station answers.(a) LOOP and POS RLSE 
LEDs off.
(b) Trunk-and-station-number display off.(c) Type-of-call display off.
(d) Class-of-service digits display off if
station or tie-line call.(e) Ringing station and calling party
connected.
(f) EXCL SRCE LED off.
(g) TOD displayed.
4.15Placing a Call Through the Attendant Console
4.15.1Outside-to-Inside Call
STEPOPERATIONRESULT
1Depress idle LOOP pushbutton (l-4).
2Dial outside access code.
3Dial number of outside party.
4Depress START/STOP pushbutton or(a) START/STOP LED off.# sign to remove tick tone.
(b) Tick tone stops.
5When outside party answers, inform
party of call and ask party to wait
while call is completed.
6Depress START/STOP pushbutton.
7
5210Dial number of station.6187
(a) LOOP LED on.
(b) POS RLSE LED on.
(c) Dial tone heard.
(a) START/STOP LED on.
(b) Second dial tone and tick tone (see
note 1) heard.(a) 
Ringback and tick tone heard (if the
option is used).
(b) Dialed digits appear 
on fixed display.
(a) Dial tone heard.
(b) START/STOP LED on.
(c) EXCL SRCE LED on (outside party
excluded).(a) Receives 
ringback tone.
(b) Dialed digits appear on fixed display.
o-1 79 
						

							‘.- -TL-130100-1001
STEPOPERATION
RESULT
(c) START/STOP LED off.
8inform station user of nature of call
when station user answers.
9Depress POS RLSE pushbutton torelease call.(a) LOOP, POS RLSE, and EXCL SRCE
LEDs off.
(b) Fixed display clears.
(c) TOD displayed.NOTES:
1.Provision of tick tone is a data base programmable option and shall be provided
together with block transmission data base option.
2.If three-way connection desired, depress EXCL SRCE pushbutton before releasing
call (EXCL SRCE LED goes off),4.15.2
Inside-to-Outside Call
STEPOPERATION
RESULT
1Depress idle LOOP pushbutton (l-4).
2Dial number of station.
3When inside party answers, inform
party of call and ask party to wait
while call is completed.
4Depress START/STOP pushbutton.
5Dial outside access code.
O-180
8/87(a) LOOP LED on.
(b) POS RLSE on.
(c) Dial tone heard.
(d) START/STOP LED on.
(a) EXCL SRCE LED on.(b) 
Ringback tone heard.
(c) Dialed digits appear on fixed display.
(d) START/STOP LED off.
(a) START/STOP LED on.
(b) Dial tone heard.
(c) EXCL SRCE LED on (first party
excluded).
Second dial tone and tick tone heard.
5210 
						

							TL-130100-1001
STEP
OPERATIONRESULT6Dial directory number of the outside
option party.(a) Ringback tone and tick tone heard (if
option provided).
(b) Dialed digits appear on fixed display.
7Depress START/STOP pushbutton.(a) START/STOP LED off.
(b) Tick tone stops.
8When outside party answers, inform
party.of nature of call.
9Depress POS RLSE pushbutton to
release call.(a) LOOP, POS RLSE and EXCL SRCE
LEDs go off.
(b) Display clears.
(c) TOD displayed.
NOTE:
Provision of tick tone is a data base programmable option and shall be provided
together with block transmission data base option.
4.15.3Inside-to-Inside Call
STEP
OPERATIONRESULT
1
2
34
55210Depress idle LOOP pushbutton.
Dial number of the station.
When inside party answers, inform
party of call and ask party to wait
while call is completed.
Depress START/STOP pushbutton,
Dial number of station.
8187(a) LOOP LED on.
(b) POS RLSE on.
(c) Dial tone heard.
(d) START/STOP LED on.
(a) EXCL SRCE LED on.
(b) 
Ringback tone heard.
(c) Dialed digits appear on fixed display
(d) START/STOP LED off.
(a) Dial tone heard.
(b) START/STOP LED on.
(c) EXCL SRCE LED on (first party
excluded).
(a) 
Ringback tone heard.
(b) Dialed digits appear on fixed display.
(c) START/STOP LED off.
O-l 81 
						

							 r- -TL-130100-1001
STEPOPERATIONRESULT
6When station user answers, inform
station user of nature of call.
7Depress POS RLSE pushbutton to(a) LOOP, POS RLSE and EXCL SRCE
release call.
LEDs off.
(b) Display clears.
(c) TOD displayed.
4.15.4 Outside-to-Outside Call
STEPOPERATIONRESULT
1Depress idle LOOP pushbutton (l-4).(a) LOOP LED on.
(b) POS RLSE on.
(c) START/STOP LED on.
(d) Dial tone heard.
2
3Dial outside access code.Second dial tone and tick tone heard.
Dial directory number of outside party.(a) 
Ringback tone and tick tone heard (if
option implemented).
(b) Dialed digits appear on fixed display.
4
Depress START/STOP pushbutton(a) START/STOP LED off.
or 
# sign.(b) Tick tone stops.
5When outside party answers, inform
party of call and ask party to wait
while call is completed.
6Depress START/STOP pushbutton.(a) START/STOP LED on.
(b) Dial tone heard.
7
8Dial outside access code.Second dial tone and tick tone heard.
Dial directory number of outside party.(a) 
Ringback tone and tick tone heard (if
option implemented).
(b) Dialed digits appear on fixed display.
9Depress START/STOP pushbutton(a) START/STOP LED off.
or # sign.
(b) Tick tone stops.
10When outside party answers, inform
party of nature of call.
O-182
81875210 
						

							- . .T.L-130100-1001
STEPOPERATION
RESULT
11Depress POS RLSE pushbutton torelease call.(a) LOOP, POS RLSE, and EXCL SRCE
LEDs off.
(b) Display clears.
(c) TOD displayed.(d) Two trunk parties are connected.
(e) If neither trunk party has supervision,
LOOP LED flashes.NOTE:
Provision of tick tone is a data base programmable option and shall be provided
together with block transmission data base option.4.16
Series Calling
4.16.1Trunk to Line
STEP
OPERATIONRESULT
1Incoming CO trunk call placed to
Attendant Console.(a) Ringing heard.
(b) LOOP LED flashes at 120 IPM.
2Depress flashing LOOP LEDpushbutton (l-4).(a) LOOP LED on.(b) “LOCAL” appears in fixed display field.
(c) Trunk number appears in variable
display field.
(d) START/STOP LED on.
(e) POS RLSE LED on.(f) Ringing stops.
(g) Transmission established between
trunk and attendant.
3Dial number of next station in series
call.(a) Fixed display cleared.
(b) EXCL SRCE LED remains on.(c) Trunk placed on hold.
(d) Dialed digits displayed in fixed display.
(e) START/STOP LED off.(f) 
60-IPM ringback tone heard.
(g) Called station receives distinctive
ringing (1 second on, 1 second off).
4Depress SER CALL pushbutton.(a) POS RLSE LED off.
(b) EXCL SRCE LED off.
(c) LOOP LED off.
(d) SER CALL LED momentarily on.(e) Trunk receives 
ringback tone.
5210ah37O-183 
						

							- -TL-130100-1001
STEP
OPERATION
RESULT
5Called station goes off-hook.
(a) Ringing removed from station.
(b) 
Ringback tone removed from calling
trunk.
(c) Transmission established between
station and trunk.
6Place called station on-hook.
(a) Ringing heard.
(b) LOOP LED flashes at 60 IPM.
(c) Trunk receives 
ringback tone.
(d) Trunk diverted to Attendant Console.
7Depress flashing LED LOOP
pushbutton.(a) Ringing stops.
(b) LOOP LED on.
(c) START/STOP LED on.
(d) POS RLSE LED on.
(e) Trunk number appears in variable
display field.
(f) “SERIES CALL” appears in fixed
display field.
(g) 
Ringback tone removed from trunk.
(h) Transmission established between
trunk and attendant.
8Repeat Steps 3 through 7 for at least
one more call.Results are the same as in Steps 3 through
7.
9Repeat Step 3.
10Depress POS RLSE pushbutton.Results are the same as in Step 3.
(a) LOOP, POS RLSE and EXCL SRCE
LEDs off.
(b) Display clears.
(c) Trunk receives 
ringback tone.
(d) TOD displayed.
11(e) Called station is ringing.
Repeat Step 5.Results are the same as in Step 5.
4.16.2
Line to Trunk and Series Call Release
STEP
OPERATION
RESULT
I
1Call attendant from one of the
station lines,(a) Ringing heard.
(b) LOOP LED (l-4) flashes at 30 IPM.
O-184
81875210 
						

							TL-130100-1001
STEPOPERATIONRESULT2Depress flashing LED LOOP
pushbutton (l-4).(a) LOOP LED on.
(b) ‘“INFORMATION” appears in fixed
display field.
(c) Line number appears in variable
display field.
(d) START/STOP LED on.
(e) POS RLSE LED on.
(f) Ringing stops.
(g) Transmission established between
line and attendant.
NOTE: 
-As an alternate to Steps 1 and 2, the attendant can initiate the call to the station and
then proceed with Step 3.
3Dial number of outgoing trunk
group access code followed by
trunk number.(a) Fixed display cleared.
(b) EXCL SRCE LED on.
(c) Line placed on hold.
(d) Dialed digits displayed in fixed display.
(e) 
Ringback tone heard.
(f) Called trunk accessed.
4Depress START/STOP pushbutton
* if on.START/STOP LED off.
5Depress SER CALL pushbutton.(a) POS RLSE LED off.
(b) EXCL SRCE LED off.
(c) LOOP LED off.
(d) SER CALL LED momentarily on.
(e) Station receives 
ringback tone.
6Called trunk answers.(a) Ringing stops.
(b) 
Ringback tone stops.
(c) Transmission established between
station and trunk.
7Go on-hook.(a) Console ringing heard.
(b) LOOP LED flashes at 60 IPM.
(c) 
Ringback tone heard.
(d) Station remains disconnected.
8’Depress flashing LED LOOP
pushbutton.(a) Console ringing stops.
(b) LOOP LED on.
(c) POS RLSE LED on.
(d) Station number appears in variable
display field.
(e) “SERIES CALL” flashes in fixed number
display field.
(f) 
Ringback tone stops.
52108187O-l 85 
						

							TL-130100-1001STEPOPERATIONRESULT
9Depress POS RLSE pushbutton.(a) LOOP LED off.
(b) POS RLSE LED off.
(c) EXCL SRCE or EXCL DEST LED off if(d) 
%ed display cleared.
(e) Trunk and station number cleared from
variable display.(f) Class-of-service digits cleared if
present.
(g) TOD displayed.
4.16.3Line to Line and Series Call Release (Invalid Condition)
STEPOPERATIONRESULT
1Attendant called from one of the
station lines.
2Depress flashing LED LOOP(a) LOOP LED on.pushbutton (l-4).(b) “INFORMATION” appears in fixed
3Dial number of next call of the
series call in fixed display.
4Depress SER CALL pushbutton.
5Depress POS RLSE pushbutton.(a) Ringing heard.(b) LOOP LED (l-4) flashes at 30 IPM.
display field.(c) 
kini number appears in variable display
(d) START/STOP LED on.
(e) POS RLSE LED on.(f) Ringing stops.
(g) Transmission established between line
and Attendant Console.
(a) Fixed display clears.
(b) EXCL SRCE LED remains on.(c) Line placed on hold.
(d) Dialed digits displayed.
(e) START/STOP LED off.(f) 
Ringback tone heard.
(g) Called line accessed.
(a) “SERIES CALL DENIED” displayed.
(b) SER CALL LED on while depressed.
(a) LOOP LED off.
(b) POS RLSE LED off.
(c) EXCL SRCE or EXCL DEST LED off if(d) 
pked display cleared.
o-1 8681875210