GE Vivid 7 User Manual

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual407
FC092326-03
Parameter Description
Add measure:
Create or select from the pop-up list a 
measurement to be added to a folder.
Add folder:
Enables the user to create its own folder 
with the desired measurements. The 
folder is displayed the Measurement 
menu.
M&A Categories:
Enables selection of the measurement 
categories to display in the Measurement 
menu. Only checked items will be 
displayed.
• Create Copy: Enables copy of a 
selected measurement category 
(selection is done by selecting the 
category name). 
• Delete: enables deletion of user-defined 
measurement categories.
• Factory Default: restores factory 
display.
2D, MM and Dop. radio buttons:
Enables the display of mode related 
Measurement menu in the configuration 
window. 
						

							Presets and System setup
408Vivid7/Vivid7 PRO Users Manual
FC092326-03
Configuration tools:
Deletes selected entry (folder 
or measurement) in the 
Measurement menu. The 
factory entries cannot be 
deleted.
Moves selected measurement 
or folder up or down inside the 
Measurement menu.
Folder:
Displayed when a folder is selected in the 
Measurement Menu.
Shows the entire contents of a selected 
folder.
•  : the items is displayed in the 
Measurement menu.
•  : The item is hidden from the 
Measurement menu.
Measurement:
Displayed when a measurement is 
selected in the Measurement Menu.
Shows all the parameters related to the 
selected measurement.
•  : the items is displayed in the 
Measurement menu.
•  : The item is hidden from the 
Measurement menu.
Only checked parameters will be 
displayed in the Measurement result 
window, the worksheet and the report.
Auto sequence:
Prompts the next measurement in the 
folder. Parameter Description 
						

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual409
FC092326-03
Configuration of the Measurement 
menu
Display of the Measurement categories
1. Press M&A categories in the Configuration window.
The M&A categories are displayed in a pop-up window 
(see page 407).
2. Check the categories to be displayed.
Uncheck the categories to hide.
To copy a Measurement categor y
1. Press M&A categories in the Configuration window.
The M&A categories are displayed in a pop-up window 
(see page 407).
2. Move the trackball marker over the M&A category name.
3. Press 
SELECT to highlight the category.
4. Press Create copy.
A copy of the selected measurement category is displayed 
in the Measurement menu.
Factory Measure-
ment categories 
cannot be renamed.To rename the Measurement category:
1. Select the Measurement category in the Measurement 
menu.
2.Enter a new name in the Measurement field.
Selection of a Measurement categor y
1. Trackball to the Measurement menu heading.
2. Press 
SELECT.
The measurement categories are displayed in a sub-
menu.
3. Trackball to the measurement category of interest.
4. Press 
SELECT.
The measurement category is displayed.
Moving an item in the Measurement menu
1. Trackball to the entry to move into the Measurement menu.
2. Press 
SELECT.
3. Press   or   to move the selection up or down inside 
the Measurement menu. 
						

							Presets and System setup
410Vivid7/Vivid7 PRO Users Manual
FC092326-03
Deleting an item in the Measurement menu
Only user created 
items can be delet-
ed.1. Trackball to the entry to delete in the Measurement menu.
2. Press 
SELECT.
3. Press   to delete the item.
Display/hide a folder or a measurement in the 
Measurement menu
The Measurement menu (Folders and Measurements) can be 
configured to display only the entries (folders and 
measurements) of interest.
To hide a folder or a measurement:
1.Uncheck the actual folder or measurement in the Folder or 
Measurement field in the Configuration window.
To display a hidden folder or measurement:
1.Check the actual folder or measurement in the Folder or 
Measurement field in the Configuration window.
Creating a user-defined folder
1. If the folder is to be inside another folder, select the actual 
folder in the Measurement menu.
2. Press Add folder.
The Measurement menu is updated.
3. Select the new folder and Enter the folder name in the 
Name text field.
Adding a measurement to a folder
The user can either add a pre-defined measurement or create 
a new measurement with user-defined parameters to a folder.
1. Select the folder in the Measurement menu.
2. Press Add Measure.
The Add measurement dialogue window is displayed 
(Figure 12-7). 
						

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual411
FC092326-03
 Figure 12-7: The Add Measurement dialogue window
To add an existing measurement with pre-defined 
parameters
1. Select Use Copy of.
2. Select the measurement in the pop-up menu.
3. Press OK.
To create a measurement with user-defined parameters
1. In the Add measurement dialogue window, select Blank.
2. Press OK.
3. In the Measurement field, enter the measurement name.
4. Select the desired measurement type in the Tool pop-up 
menu.
The actual measurement parameters are displayed.
5. Trackball to the first parameter in the Parameter column.
6. Press 
SELECT twice to activate the free text cursor.
7.Enter a name for the parameter.
Adding a user-defined function to a measure-
ment
1. Select the actual measurement in the Measurement menu.
The parameters related to the measurement are listed in 
Parameter list.
2.Press twice on an empty line at the bottom of the 
Parameter list.
The free text cursor is activated.
3.Enter a name for the parameter.
4. Press on the Parameter line once again.
The Edit Formula dialogue window is displayed. 
						

							Presets and System setup
412Vivid7/Vivid7 PRO Users Manual
FC092326-03
 Figure 12-8: The Edit formula dialogue window
5. Create a formula by selecting parameters, operators and 
functions.
Unit: All results are calculated in SI units. If the unit is not 
specified or not one in the table below, the displayed value 
will be in SI units. All conversions to other units must 
include a conversion factor in the formula. If the unit is one 
in the table below, the conversion factor will be included in 
the formula.
6. Press Check to control the formula.
7. Press OK to store the parameter.
CAUTIONMake sure that the formula gives a SI unit that is compatible with 
the conversion unit.
CAUTIONGE Ultrasound do not take any responsibility for the correctness 
of the user-defined functions.
Calculation SI Alternative unit
Time s
Ratio %
Frequency bpm
Angle rad
Distance m 
						

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual413
FC092326-03
Velocity m/s
Acceleration
m/s
2
Area
m2
Volume
m3
Volume flow
m3/s
Pressure mmHg
Pressure/time mmHg/s
Mass kg
OtherCalculation SI Alternative unit 
						

							Presets and System setup
414Vivid7/Vivid7 PRO Users Manual
FC092326-03
Repor t
The Report configuration category is divided in three sheets:
• Te m p l a t e s: enables the configuration of the Te m p l a t e  
selection menu
• Diagnostic codes: enables the creation of pre-defined text 
inputs to be used in the Diagnosis information field in the 
Examination list window (see Figure 8-10, page 286).
• Comment texts: enables the creation of pre-defines text 
inputs to be used in the Comment information field in the 
Examination list window (see Figure 8-10, page 286). 
						

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual415
FC092326-03
The Report templates sheet
 Figure 12-9: The Report templates sheet
1. Application selection pop-up menu
2. List of factory and user-defined report templates 
for the selected application
3. List of report templates shown in the Templat e 
selection menu for the selected application
4. Add/remove selected template to/from the 
Template selection menu.5. Move selected template up/down in the Tem plate 
selection menu.
6. Open selected template in the template 
designer.
7. Delete selected template (user-defined 
templates only)
8. Export template to MOD or CD-R 
						

							Presets and System setup
416Vivid7/Vivid7 PRO Users Manual
FC092326-03
Configuration of the Template selection menu
The configuration of the Template selection menu is done by:
•  Selecting the application specific Template list (left field) 
and the application specific Template selection menu (right 
field).
•  Inserting or removing report templates to/from the Te m p l a t e  
selection menu.
•  Sorting the report templates in the Template selection 
menu.
Procedure
Selecting the application specific template list and 
Template selection menu:
1. Trackball to the Application selection pop-up menu over the 
list of report templates (left field, see Figure 12-9).
2. Press 
SELECT.
The pop-up menu is displayed.
3. Trackball to the desired application.
4. Press 
SELECT.
The list of factory and user-defined report templates (left 
field, see Figure 12-9) is updated showing the available 
templates for the selected application.
5. Likewise select the application for the Template selection 
menu (right field, see Figure 12-9).
Inserting a template to the Template selection menu
1. Trackball to the template to insert in the Template list (left 
field).
2. Press 
SELECT.
3. Press the Right arrow button .
The selected template is inserted in the Template selection 
menu (right field).
Removing a template from the Template selection 
menu
1. Trackball to the template to remove in the Te m p l a t e  
selection menu (right field).
2. Press 
SELECT.
3. Press the Left arrow button .
The selected template is removed from the Te m p l a t e  
selection menu (right field).