Canon printer PIXMA MG5620 User Manual
Have a look at the manual Canon printer PIXMA MG5620 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screenappears. In that case, skip ahead to Step 3.2. In the notification area on the desktop, right-click (IJ Network Scanner Selector EX), then select Settings.... The Scan-from-PC Settings screen appears. 3. Select your scanner or printer from Scanners. Normally, the MAC address of your scanner or printer is already selected after the network setup. In that case, you do not need to select it again. Important • If multiple scanners exist on the network, multiple model names appear. In that case, you can select one scanner per model. 4. Click OK. Note • The scanner selected in the Scan-from-PC Settings screen will be automatically selected in the Scan- from-Operation-Panel Settings screen as well. Setting for Scanning with IJ Scan Utility To scan from IJ Scan Utility using a scanner or printer connected to a network, specify your scanner orprinter with IJ Network Scanner Selector EX, then follow the steps below to change the connection status between it and the computer. 1. Start IJ Scan Utility. 2. Select "Canon XXX series Network" (where "XXX" is the model name) for Product Name . Note • For USB connection, select "Canon XXX series" (where "XXX" is the model name) for Product Name . 3. Click Settings... to use another scanner connected to a network. 4. Click (General Settings), then click Select in Product Name . The Scan-from-PC Settings screen of IJ Network Scanner Selector EX appears. Select the scanner you want to use and click OK. 5. In the Settings (General Settings) dialog box, click OK. The IJ Scan Utility main screen reappears. You can scan via a network connection. 711
Setting for Scanning from the Operation Panel You can make the setting for scanning from the operation panel. Important • Set IJ Scan Utility to use your scanner or printer via a network connection beforehand. Setting for Scanning with IJ Scan Utility 1. Check that IJ Network Scanner Selector EX is running. If IJ Network Scanner Selector EX is running, (IJ Network Scanner Selector EX) appears in the notification area on the desktop. Click to check the hidden icons as well. Note • If the icon is not displayed in the notification area on the desktop, follow the procedure below to start. • Windows 8.1 / Windows 8: Click IJ Network Scanner Selector EX on the Start screen. If IJ Network Scanner Selector EX is not displayed on the Start screen, select the Search charm, then search for "IJ Network Scanner Selector EX". • Windows 7/Windows Vista/Windows XP: From the Start menu, click All Programs > Canon Utilities > IJ Network Scanner Selector EX > IJ Network Scanner Selector EX . The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screen appears. In that case, skip ahead to Step 3. 2. In the notification area on the desktop, right-click (IJ Network Scanner Selector EX), then select Settings.... The Scan-from-PC Settings screen appears. 3. Click Scan-from-Operation-Panel Settings . The Scan-from-Operation-Panel Settings screen appears. 4. Select your scanner or printer from Scanners and click OK. Select the MAC address of your scanner or printer. Note • When multiple scanners are connected via a network, you can select up to three scanners. 5. In the Scan-from-PC Settings screen, click OK. Note • If your scanner or printer does not appear, check the following, click OK to close the screen, then reopen it and try selecting again. 712
•MP Drivers is installed• Network settings of your scanner or printer is completed after installing the MP Drivers • Network communication between your scanner or printer and computer is enabled If your scanner or printer still does not appear, refer to "Problems with Network Communication" for your model from Home of the Online Manual. 713
Selecting a Response to Commands from the Operation Panel Using IJ Scan Utility IJ Scan Utility allows you to specify how to respond when scanning from the operation panel. Note • The screens for scanning with Auto Scan from the operation panel are used as examples in thefollowing descriptions. 1. Start IJ Scan Utility. 2. Click Settings... . The Settings dialog box appears. 3. Select a scan mode on the (Scanning from the Operation Panel) tab. 714
Note• Refer to the following for details. Settings (Save to PC (Auto)) Dialog Box Settings (Save to PC (Photo)) Dialog Box Settings (Save to PC (Document)) Dialog Box Settings (Attach to E-mail (Photo)) Dialog Box Settings (Attach to E-mail (Document)) Dialog Box 4. Set Scan Options . 5. Specify the file name and other settings in Save Settings. 715
6. Select the application you want to start after scanning in Application Settings. 7. Click OK. 716
The responses will be executed according to the specified settings when you start scanning from theoperation panel. 717
Troubleshooting The Machine Cannot Be Powered On Printing Does Not Start Paper Does Not Feed Properly/"No Paper" Error Occurs Print Results Not Satisfactory Ink Is Not Ejected Paper Jams If an Error Occurs Search Each Function Problems with Network Communication Problems with Printing Problems with Printing Quality Problems with Scanning Problems with the Machine Problems with Installation/Downloading About Errors/Messages Displayed If You Cannot Resolve the Problem 718
Problems with Network Communication Problems with the Machine While Using with Network Cannot Detect a Machine on a Network Other Problems with Network 719
Problems with the Machine While Using with Network The Machine Stopped Working Suddenly Ink Remaining Level Is Not Displayed on Printer Status Monitor of the Machine Printing Speed Is Slow Cannot Use the Machine on Replacing an Access Point or Changing Its settings 720