Canon printer PIXMA MG5620 User Manual
Have a look at the manual Canon printer PIXMA MG5620 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PictBridge print settingsYou can change the print settings when printing from a PictBridge (Wireless LAN) compliant device. Set the print settings to Default on the PictBridge (Wireless LAN) compliant device when you want to print according to the settings on the machine. To change print settings from the PictBridge (Wireless LAN) compliant device: Settings on a PictBridge (Wireless LAN) Compliant Device 1. Page size Select the paper size when printing directly from a PictBridge (Wireless LAN) compliant device.When you perform PictBridge (Wireless LAN) settings from the machine, set Paper size to Default on the PictBridge (Wireless LAN) compliant device. 2. Type (Media type) Select the media type when printing directly from a PictBridge (Wireless LAN) compliant device. When you perform PictBridge (Wireless LAN) settings from the machine, set Paper type to Default on the PictBridge (Wireless LAN) compliant device. 3. Print qlty (Print quality) Select the print quality when printing directly from a PictBridge (Wireless LAN) compliant device. 4. Border (Bordered/Borderless print) Select the bordered/borderless layout. When you perform PictBridge (Wireless LAN) settings from the machine, set Layout to Default on the PictBridge (Wireless LAN) compliant device. 5. Photo fix When Auto photo fix is selected, the scene or person's face of a shot photo is recognized and the most suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene with the most suitable color, brightness, or contrasts automatically to print. Note • As a default, photos on a PictBridge (Wireless LAN) compliant device are printed with auto correction applied. 231
•If No correction is selected, photos are printed without correction.6. Red-EyeCorrection Select ON to correct red eyes in portraits caused by flash photography. Depending on the type of the photo, red eyes may not be corrected or parts other than the eyes may be corrected. 232
Language selectionChanges the language for messages and menus on the LCD.233
Firmware updateYou can update the firmware of the machine, check the firmware version, or perform settings of a notification screen, a DNS server and a proxy server. Note • Only Check current version is available when Disable LAN is selected for Change LAN in LAN settings . • Install update Performs the firmware update of the machine. If you select Yes, the firmware update starts. Follow the on-screen instructions to perform update. Important • When you use this function, make sure that the machine is connected to the Internet. Note • If the firmware update is not complete, check the following and take an appropriate action. • Check the network settings such as an access point or a router. • If Cannot connect to the server. is displayed on the LCD, press the OK button, then try again after a while. • Check current version You can check the current firmware version. • Update notification setting When ON is selected and the firmware update is available, the screen to inform you of the firmware update is displayed on the LCD. • DNS server setup Performs settings for a DNS server. Select Auto setup or Manual setup . If you select Manual setup , follow the display on the LCD to perform settings. • Proxy server setup Performs settings for a proxy server. Follow the display on the LCD to perform settings. 234
Cassette settingsBy registering the paper size and the media type loaded in the cassette, you can prevent the machine from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings. For details: Paper Setting for Printing • Register cassette paper info Registers the paper size and the media type you load in the cassette. Note • When you register the paper size and the media type, the screen to select whether you apply the settings to those for copying is displayed. Select Yes to apply the registered settings to copying. • For details on the proper combination of paper settings you can specify by the printer driver or on the LCD: Setting the Media Type with the Printer Driver and on the Printer Setting the Paper Size with the Printer Driver and on the Printer • Detect paper setting mismatch If you select Yes, the machine detects whether the paper size and the media type are the same as those registered in Register cassette paper info . If printing starts with the settings that do not match, an error message is displayed on the LCD. Note • When No is selected, Register cassette paper info or Detect cassette reinsertion is disabled. • Detect cassette reinsertion If you select Yes, the machine detects the cassette is reinserted. When the Register cassette paper info screen is displayed, register the paper size and the media type. 235
Reset settingYou can change the settings back to the default.• Web service setup only Reverts the Web service settings back to the default. • LAN settings only Reverts the LAN settings other than the administrator password specified by IJ Network Tool back to the default. • Settings only Reverts the settings such as the paper size or media type back to the default. • Device info sending setting only Reverts only the device information sending settings. • Reset all Reverts all settings you made to the machine back to the default. The administrator password specified by IJ Network Tool reverts to the default setting. Note • You cannot change the following setting items back to the default: • The language displayed on the LCD • The current position of the print head 236
About ECO settingsThis setting allows you to use automatic duplex printing as a default to save paper and to turn the machine on/off automatically to save electricity. Using Duplex Printing Using Power Saving Function Using Duplex Printing Follow the procedure below to use duplex printing. 1. Make sure that the machine is turned on. 2. Select ECO settings on the HOME screen. LCD and Operation Panel 3. Select Two-sided printing setting , then press the OK button. 4. Use the button to change the setting item, use the button to change the setting, then use the OK button to confirm the selection. 1. Copy Sets two-sided copying as a default. 2. Template print Sets two-sided printing of template forms on the machine as a default. Note • When duplex printing is selected, the icon is displayed on each menu of the HOME screen or on the setting items for duplex printing on each print setting screen. Using Power Saving Function Follow the procedure below to use power saving function. 237
1.Make sure that the machine is turned on.2. Select ECO settings on the HOME screen. LCD and Operation Panel 3. Select Energy saving settings , then press the OK button. 4. Use the button to change the setting item, use the button to change the setting, then use the OK button to confirm the selection. 1. Auto power off Specifies the length of time to turn the machine off automatically when no operation is made or no printing data is sent to the machine. Note • The Auto power off setting is invalid when using the machine via a network and the networkconnection is enabled. You can check the connection status from WLAN setting list in Confirm LAN settings under LAN settings . 2. Auto power on Selecting ON enables the machine to turn on automatically when a scanning command from a computer or printing data is sent to the machine. 238
About Quiet settingEnables this function on the machine if you want to reduce the operating noise, such as when printing at night. Follow the procedure below to perform setting.1. Make sure that the machine is turned on. 2. Select Quiet setting on the HOME screen. LCD and Operation Panel 3. Use the button to select Use quiet mode , then press the OK button. The confirmation screen is displayed, then the icon appears as the Quiet setting menu icon. Activate this setting to reduce the operating noise while printing is in progress. Important • Operating speed may be reduced compared to when Do not use quiet mode is selected. • This function may not be so effective depending on the machine's setting. Furthermore, certain noise, such as when the machine is preparing for printing, is not reduced. Note • You can set the quiet mode from the operation panel of the machine, the printer driver, or ScanGear (scanner driver). No matter how you set the quiet mode, the mode is applied when you perform operations from the operation panel of the machine or printing and scanning from the computer. 239
Using the Machine with the Access Point ModeBy using the machine as an access point in an environment that does not have wireless LAN router or access point, or by using the machine as an access point temporarily in an environment that has wireless LAN router or access point, you can connect the machine to an external device such as a computer or a smartphone and print/scan from them. This section describes how to enable the access point mode, the access point name of the machine, and the security setting. How to enable the Access Point Mode Printing/Scanning with the Access Point Mode How to terminate the Access Point Mode Setting of the Access Point Mode Important • Before using the machine with the access point mode, confirm the usage restrictions then switch the machine to the access point mode. Restrictions • If you use the machine with the access point mode for the long time, it is recommended that you change the default access point name and the default password to the combination of numbers and letters with the point of view of security. How to enable the Access Point Mode Enable the access point mode following the procedure below. 1. Make sure that the machine is turned on. 2. Select Setup on the HOME screen. LCD and Operation Panel 3. Select Device settings , then press the OK button. 4. Use the button to select LAN settings, then press the OK button. 5. Use the button to select Change LAN, then press the OK button. 6. Use the button to select Access point mode active , then press the OK button. The access point name (SSID) that set currently is displayed. (When using the machine for the first time, the default setting is displayed.) When detecting the machine from the external device such as a computer or a smartphone, you can detect with the access point name (SSID). 240