Canon printer PIXMA MG5620 User Manual
Have a look at the manual Canon printer PIXMA MG5620 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Replacing an Ink Tank Replacing an Ink Tank Checking the Ink Status 171
Replacing an Ink TankWhen remaining ink cautions or errors occur, the message will appear on the LCD to inform you of the error.Take appropriate action according to the message. A Message Is Displayed Note • If print results become faint or white streaks appear despite sufficient ink levels, see Maintenance Procedure . Replacing Procedure When you need to replace an ink tank, follow the procedure below. Important • If you remove an ink tank, replace it immediately. Do not leave the machine with the ink tank removed. • Use a new ink tank for replacement. Installing a used ink tank may cause the nozzles to clog.Furthermore, with such an ink tank, the machine will not be able to inform you when to replace the ink tank properly. • Once an ink tank has been installed, do not remove it from the machine and leave it out in the open. This will cause the ink tank to dry out, and the machine may not operate properly when it is reinstalled. To maintain optimal printing quality, use an ink tank within six months of first use. Note • Color ink may be consumed even when printing a black-and-white document or when black-and- white printing is specified. Every ink is also consumed in the standard cleaning and deep cleaning of the print head, which may be necessary to maintain the performance of the machine. When an ink tank is out of ink, replace it immediately with a new one. Useful Information about Ink 1. Make sure that the power is turned on. 2. Open the front cover. 3. Open the operation panel (A), then open the paper output tray (B). 172
Open the operation panel (A) until it stops.The print head holder moves to the replacement position. Caution • Do not hold the print head holder to stop or move it forcibly. Do not touch the print head holder until it stops completely. Important • When opening or closing the operation panel, do not touch the buttons and LCD on the operation panel. Doing so may result in an unexpected operation. • Do not touch the metallic parts or other parts inside the machine. • If the operation panel is left open for more than 10 minutes, the print head holder moves to the right. In this case, close and reopen the operation panel. 4. Remove the ink tank with the lamp flashing fast. Push the tab (C) and lift the ink tank to remove. Important • Do not touch other parts besides the ink tanks. • Handle the ink tank carefully to avoid staining of clothing or the surrounding area. • Discard the empty ink tank according to the local laws and regulations regarding disposal of consumables. Note • Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one when replacing two or more ink tanks. • For details on ink lamp flashing speed, see Checking the Ink Status with the Ink Lamps . 173
5.Prepare a new ink tank.1. Take a new ink tank out of its package, remove the orange tape () completely, then remove the protective film ( ) completely. Important • Handle an ink tank carefully. Do not drop or apply excessive pressure to it. • If the orange tape remains on the Y-shape air hole (D), ink may splash or the machine may not print properly. 2. Hold the ink tank with the orange protective cap (E) pointing up while being careful not to block the Y-shape air hole (D). 3. Lift up the tab on the orange protective cap (E) to remove it off GENTLY. 174
Important • Do not push the sides of the ink tank. If you push the sides of the ink tank with the Y-shape air hole (D) blocked, ink may splash. • Do not touch the inside of the orange protective cap (E) or the open ink port (F). The ink may stain your hands if you touch them. • Do not reattach the protective cap (E) once you have removed it. Discard it according to the locallaws and regulations regarding disposal of consumables. 6. Install the new ink tank. 1. Insert the front end of the ink tank into the print head at a slant. Make sure that the position of the ink tank matches the label. 2. Press on the top of the ink tank until the ink tank snaps firmly into place. Make sure that the ink lamp lights up. 175
Important • You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in the correct position according to the label on the print head holder. • You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks. 7. Close the operation panel gently. Caution • When closing the operation panel, be careful not to get your fingers caught. Important • When opening or closing the operation panel, do not touch the buttons and LCD on the operation panel. Doing so may result in an unexpected operation. Note • If the error message appears after the operation panel is closed, take appropriate action. A Message Is Displayed • When you start printing after replacing the ink tank, the machine starts cleaning the print head automatically. Do not perform any other operations until the machine completes the cleaning of the print head. • If the print head is out of alignment, as indicated by misaligned printed ruled lines or similar symptoms, align the print head . 176
Checking the Ink Status Checking the Ink Status with the LCD on the Machine Checking the Ink Status with the Ink Lamps You can also check the ink status on the computer screen. Checking the Ink Status from Your Computer 177
Checking the Ink Status with the LCD on the Machine1. Make sure that the power is turned on, and display the HOME screen. If the HOME screen is not displayed, press the HOME button to display it. 2. Select Setup on the HOME screen. LCD and Operation Panel The setup menu screen will appear. 3. Select Estimated ink levels , then press the OK button. A symbol appears in the area (A) if there is any information about the remaining ink level. Example: Ink tank is running low. Prepare a new ink tank. Note • The above screen shows estimated ink levels. • To display and print the model number of the ink tank, select Ink number by pressing the right Function button. • You can also check the ink status on a screen of the LCD displayed while printing. • You can also check the ink status on the computer screen. Checking the Ink Status from Your Computer 178
Checking the Ink Status with the Ink Lamps1. Make sure that the power is turned on. 2. Open the front cover, then open the paper output tray. 3. Lift the operation panel and open until it stops. Replacing Procedure 4. Check the ink lamp.Close the operation panel after checking the ink lamp status. Replacing Procedure • The ink lamp is on. The ink tank is correctly installed. • The ink lamp is flashing. Flashing slowly (at around 3-second intervals) ...... Repeats Ink tank is running low. Prepare a new ink tank. Flashing fast (at around 1-second intervals) ...... Repeats - The ink tank is installed in the wrong position. Or - The ink has run out. Make sure that the ink tank is installed in the correct position as indicated by the label on the print head holder. If the position is correct but the lamp flashes, there has been an error and the machine cannot print. Check the error message displayed on the LCD. A Message Is Displayed • The ink lamp is off. The ink tank is not installed properly or the function for detecting the remaining ink level is disabled. If the ink tank is not firmly in place, make sure that the orange protective cap has been 179
removed from the bottom of the ink tank, then press on the top of the ink tank until the ink tankclicks into place. If the ink lamp is still off after reinstalling the ink tank, there has been an error and the machine cannot print. Check the error message displayed on the LCD. A Message Is Displayed Note • You can also check the ink status on the computer screen. Checking the Ink Status from Your Computer 180