Canon printer PIXMA MG5620 User Manual
Have a look at the manual Canon printer PIXMA MG5620 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Printing AreaTo ensure the best print quality, the machine allows a margin along each edge of media. The actual printable area will be the area inside these margins. Recommended printing area : Canon recommends that you print within this area. Printable area : The area where it is possible to print. However, printing in this area can affect the print quality or the paper feed precision. Note • With performing Automatic Duplex Printing and Duplex (Two-sided) Copying, the printable area will be 0.08 inch (2 mm) smaller at the top margin. • When performing borderless copying or borderless printing from a printed photo, select Extended copy amount in Print settings of Device settings to specify the amount of images that extends off the paper. Print settings • By selecting Borderless Printing option, you can make prints with no margins. • When performing Borderless Printing, slight cropping may occur at the edges since the printed image is enlarged to fill the whole page. • For Borderless Printing, use the following paper: • Photo Paper Pro Platinum • Glossy Photo Paper "Everyday Use" • Photo Paper Glossy • Photo Paper Plus Glossy II • Photo Paper Pro Luster • Photo Paper Plus Semi-gloss • Matte Photo Paper Performing Borderless Printing on any other type of paper may substantially reduce printing quality and/or result in printouts with altered color hues. Borderless Printing on plain paper may result in printouts with reduced quality. Use them only for test printing. Borderless Printing onto plain paper from the operation panel or from a digital camera is not supported. • Borderless Printing is not available for legal, A5, or B5 sized paper, or envelopes. • Depending on the type of paper, Borderless Printing may reduce the print quality at the top and bottom edges of the paper or cause these parts to become smudged. 161
Other Sizes than Letter, Legal, EnvelopesSizePrintable Area (width x height)A55.56 x 7.95 inches (141.2 x 202.0 mm)A48.00 x 11.38 inches (203.2 x 289.0 mm)B56.90 x 9.80 inches (175.2 x 249.0 mm)4" x 6" (10 x 15 cm)3.73 x 5.69 inches (94.8 x 144.4 mm)5" x 7" (13 x 18 cm)4.73 x 6.69 inches (120.2 x 169.8 mm)8" x 10" (20 x 25 cm)7.73 x 9.69 inches (196.4 x 246.0 mm) Recommended printing area (A) 1.70 inches (43.3 mm) (B) 1.47 inches (37.4 mm) Printable area (C) 0.12 inch (3.0 mm) (D) 0.20 inch (5.0 mm) (E) 0.13 inch (3.4 mm) (F) 0.13 inch (3.4 mm) 162
Letter, LegalSizePrintable Area (width x height)Letter8.00 x 10.69 inches (203.2 x 271.4 mm)Legal8.00 x 13.69 inches (203.2 x 347.6 mm) Recommended printing area (A) 1.70 inches (43.3 mm) (B) 1.47 inches (37.4 mm) Printable area (C) 0.12 inch (3.0 mm) (D) 0.20 inch (5.0 mm) (E) 0.25 inch (6.4 mm) (F) 0.25 inch (6.3 mm) 163
EnvelopesSizeRecommended Printing Area (width x height)Envelope DL3.88 x 7.06 inches (98.8 x 179.5 mm)Envelope Com 103.68 x 7.90 inches (93.5 x 200.8 mm) Recommended printing area (A) 0.31 inch (8.0 mm) (B) 1.28 inches (32.5 mm) (C) 0.22 inch (5.6 mm) (D) 0.22 inch (5.6 mm) 164
Loading Originals Loading Originals on the Platen Glass How to Load Originals for Each Function Originals You Can Load How to Detach / Attach the Document Cover 165
Loading Originals on the Platen Glass1. Load an original on the platen glass. 1. Open the document cover. 2. Load the original WITH THE SIDE TO SCAN FACING DOWN on the platen glass. Originals You Can Load How to Load Originals for Each Function Important • Be sure to observe the following when loading the original on the platen glass. • Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass. • Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down the original. Failure to observe the above may cause the scanner to malfunction or the platen glass to break. 2. Close the document cover gently. Important • After loading the original on the platen glass, be sure to close the document cover before starting to copy or scan. 166
How to Load Originals for Each FunctionLoad the original in the correct position according to the function to use. If you do not load the original correctly, it may not be scanned properly. Loading the Original to Be Aligned with the alignment mark • Load originals to copy • In Scan , ◦ select Auto scan for Doc.type to scan text documents, magazines, or newspapers ◦ select Document or Photo for Doc.type and specify a standard size (A4, Letter, etc.) for Scan size to scan originals • With a software application on a computer, ◦ scan text documents, magazines, or newspapers ◦ select a standard size (A4, Letter, etc.) to scan originals Place the original WITH THE SIDE TO SCAN FACING DOWN on the platen glass and align it with the alignment mark . Portions placed on the diagonally striped area cannot be scanned. Important • The machine cannot scan the striped area (A) (0.04 inch (1 mm) from the edges of the platen glass). Loading Only One Original in the Center of the platen glass • Scan only one printed photo in Photo copy • In Scan , ◦ select Auto scan for Doc.type to scan one printed photo, postcard, business card, or disc 167
◦select Photo for Doc.type and specify Auto scan for Scan size to scan one original• Scan one printed photo, postcard, business card, or disc with a software application on a computer Place the original WITH THE SIDE TO SCAN FACING DOWN, with 0.4 inch (1 cm) or more space between the edges (diagonally striped area) of the platen glass. Portions placed on the diagonally striped area cannot be scanned. Loading Two or More Originals on the platen glass • Scan two or more printed photos in Photo copy • In Scan , ◦ select Auto scan for Doc.type to scan two or more printed photos, postcards, or business cards ◦ select Photo for Doc.type and specify Auto multi scan for Scan size to scan two or more originals • Scan two or more printed photos, postcards, or business cards with a software application on a computer Place the originals WITH THE SIDE TO SCAN FACING DOWN. Allow 0.4 inch (1 cm) or more space between the edges (diagonally striped area) of the platen glass and the originals, and between the originals. Portions placed on the diagonally striped area cannot be scanned. You can place up to 12 items. (A) More than 0.4 inch (1 cm) Note • The Skew Correction function automatically compensates for the originals placed at an angle of up to approximately 10 degrees. Slanted photos with a long edge of 7.1 inches (180 mm) or more cannot be corrected. • Non-rectangular or irregular shaped photos (such as cut out photos) may not be scanned properly. 168
Originals You Can LoadItemDetailsTypes of originals- Text document, magazine, or newspaper - Printed photo, postcard, business card, or disc (BD/DVD/CD, etc.)Size (width x height)Max. 8.5 x 11.7 inches (216 x 297 mm) Note • When loading a thick original such as a book on the platen glass, you can load it by removing the document cover from the machine. How to Detach / Attach the Document Cover 169
How to Detach / Attach the Document CoverDetaching the document cover:Hold up the document cover vertically and then tip it back. Attaching the document cover: Fit both hinges (A) of the document cover into the holder (B) and insert both hinges of the document cover vertically as illustrated below. 170