Canon printer PIXMA MG5620 User Manual
Have a look at the manual Canon printer PIXMA MG5620 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Don't detect mismatch of paper settings when printing from computerWhen you print documents from your computer and the paper settings on the printer driver and the printer do not match, this setting disables the message display and allows you to continue printing. To disable detection of paper setting mismatches, select this check box. Ink Drying Wait Time You can set the length of the printer rest time until printing of the next page begins. Moving the slider to the right increases the pause time, and moving the slider to the left decreases the time. If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time. Reducing the ink drying wait time speeds up printing.4. Apply the settings Click OK and when the confirmation message appears, click OK. The printer operates with the modified settings hereafter. 221
Changing the Machine Settings on the LCD Changing the Machine Settings on the LCD Print settings LAN settings Device user settings PictBridge print settings Language selection Firmware update Cassette settings Reset setting About ECO settings About Quiet setting Using the Machine with the Access Point Mode 222
Changing the Machine Settings on the LCDThis section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amount as an example.1. Make sure that the machine is turned on. 2. Select Setup on the HOME screen. LCD and Operation Panel 3. Select Device settings , then press the OK button. The Device settings screen is displayed. 4. Use the button to select the setting item, then press the OK button. The setting screen for the selected item is displayed. 5. Use the button to select the menu, then press the OK button. 6. Use the button to select the setting item, then press the OK button. 223
You can select the setting menus below. Print settings LAN settings Device user settings PictBridge print settings Language selection Firmware update Cassette settings Reset setting Note • You can use the machine considering the environment, such as setting 2-sided printing as default orenabling the machine to turn on/off automatically. About ECO settings • You can reduce the operating noise when printing at night. About Quiet setting 224
Print settings• Prevent paper abrasion Use this setting only if the print surface becomes smudged. Important • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality. • Extended copy amount Selects the amount of image that extends off the paper when printing in borderless (full). Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You can change the width to be cropped from the borders of the original image as needed. Cropped area will be larger if Extended amount: Large is selected. Important • This setting can be applied under the following conditions: - Performing borderless copying - Borderless is selected for Border when copying printed photos Note • If printouts contain margins even though you are printing in Borderless, specifying Extended amount: Large for this setting may help solve the problem. • Auto photo fix setting When ON is selected, you can select whether to print photos using the Exif information recorded in the image files when Default* or On is selected in printing with a PictBridge (Wireless LAN) compliant device. * When Default is selected for the print setting on the PictBridge (Wireless LAN) compliant device, select Auto photo fix for Photo fix in PictBridge print settings . • Prevent paper double-feed Select ON to prevent double-feed of plain paper. Important • Select ON only when double-feed of plain paper occurs. • Adjust horizontal print position Adjusts the print position when the left/right margins are not aligned. You can adjust the left/right margins in increments of 0.003 inches/0.1 mm between -0.1 inches/-3 mm and +0.1 inches/+3 mm centered on the horizontal center of the paper. Important • For Letter-sized or Legal-sized paper, you can adjust the left/right margins between -0.05 inches/-1.5 mm and +0.05 inches/+1.5 mm even if you specify the value over 0.05 inches/1.5 mm. 225
LAN settings• Change LAN Enables either wireless LAN or access point mode. You can also disable wireless LAN or access point mode. • Wireless LAN setup Selects the setup method for wireless LAN connection. Note • You can also enter this setting menu by selecting WLAN on the HOME screen. In this case, enable wireless LAN. When this menu is selected, the machine starts searching for a WPS-compatible access point. If the machine detects the access point, follow the on-screen instructions to set up wireless LAN. If an access point is not detected or if you select another setup method, select one of the setup methods below. ◦ Standard setup Select when you perform settings for wireless LAN manually using the operation panel of the machine. ◦ WPS (Push button method) Select when you perform settings for wireless LAN using an access point supporting a Wi-Fi Protected Setup (WPS) push button method. Follow the on-screen instructions during setup. ◦ Other setup Advanced setup Select when you perform settings for wireless LAN manually. You can specify multiple WEP keys. WPS (PIN code method) Select when you perform settings for wireless LAN using an access point supporting a Wi-Fi Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup. Cableless setup Select if you specify the settings of the access point information to the machine directly from adevice (such as a smartphone) without operating the access point. Follow the on-screen instructions of the connecting device for the setup procedure. • Confirm LAN settings The list of wireless LAN settings or the access point mode of this machine is displayed on the LCD. You can print the list from this setting menu. ◦ WLAN setting list The list of wireless LAN settings of this machine is displayed on the LCD. The following setting items are displayed. ItemsSettingConnectionActive/InactiveSSIDXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX 226
Communication modeInfrastructureChannelXXWireless LAN securityInactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)IPv4 addressXXX. XXX. XXX. XXXIPv4 subnet maskXXX. XXX. XXX. XXXIPv4 default gatewayXXX. XXX. XXX. XXXIPv6 addressXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXXIPv6 subnet prefix lengthXXXIPv6 default gatewayXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXXMAC addressXX:XX:XX:XX:XX:XXIPsec settingsEnable (ESP)/Enable (ESP & AH)/Enable (AH)/DisablePre-shared keyXXXXXXXXXXXXXXXXPrinter nameXXXXXXXXXXXXXXXBonjour service nameXXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
("XX" represents alphanumeric characters.)
◦
AP mode setting list
The list of access point mode settings of this machine is displayed on the LCD. The following setting items are displayed.
ItemsSettingConnectionActive/InactiveSSIDXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXPasswordXXXXXXXXXXCommunication modeAccess point modeChannel3Wireless LAN securityInactive/WPA2-PSK(AES)IPv4 addressXXX. XXX. XXX. XXXIPv4 subnet maskXXX. XXX. XXX. XXX
227
IPv4 default gatewayXXX. XXX. XXX. XXXIPv6 addressXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXXIPv6 subnet prefix lengthXXXIPv6 default gatewayXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXXMAC addressXX:XX:XX:XX:XX:XXIPsec settingsDisablePre-shared keyXXXXXXXXXXXXXXXXPrinter nameXXXXXXXXXXXXXXXBonjour service nameXXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
("XX" represents alphanumeric characters.)
◦
Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out:
Printing Out Network Setting Information
Important
•
This printout contains valuable information about your computer. Handle it with care.
•
Other settings
Important
•
You cannot select the items below when Disable LAN is selected for Change LAN.
◦
Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
Note
•
You cannot use the same printer name as that already used for other LAN connected devices.
•
You cannot use a hyphen for the initial or last character of the printer name.
◦
TCP/IP settings
Performs IPv4 or IPv6 setting.
◦
WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 8.1,
Windows 8, Windows 7, and Windows Vista).
Enable/disable WSD Selects whether WSD is enabled or disabled.
228
Note• When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows 8.1, Windows 8, Windows 7 and Windows Vista. WSD scan from this device Selecting Enable allows you to transfer the scanned data to the computer using WSD. Timeout setting Specifies the timeout length. ◦ Bonjour settings Setting items for LAN using Bonjour for Mac OS. Enable/disable Bonjour Selecting Enable allows you to use Bonjour to perform the network settings. Service name Specifies the Bonjour service name. You can use up to 48 characters for the name. Note • You cannot use the same service name as that already used for other LAN connected devices. ◦ LPR protocol setting Activates/deactivates the LPR setting. ◦ PictBridge communication Setting items for printing from a PictBridge (Wireless LAN) compliant device. Enable/disable communication Selecting Enable allows you to print from a PictBridge (Wireless LAN) compliant device. Timeout setting Specifies the timeout length. ◦ Wireless LAN DRX setting Selecting Enable allows you to activate discontinuous reception when using wireless LAN. It allows you to save electricity. Note • Depending on the access point you are using, discontinuous reception may not be activated even though Enable is selected. • Discontinuous reception is activated only while the machine is on standby. (The LCD is in the screen saver mode.) ◦ Access point mode settings When you use the machine as an access point, specify the access point name and the security setting. Using the Machine with the Access Point Mode 229
Device user settings• Date display format Changes the display format of dates when printed. • Key repeat Enables/Disables continuous input by pressing and holding down the , , , , + , or - button when setting the number of copies, changing the photo displayed on the LCD, setting the zoom ratio, etc. • Device info sending setting Selects whether you will send the printer usage information to Canon server. The information sent to Canon will be utilized to develop better products. Select Agree to send the printer usage information to Canon server. 230