Canon Maxify Mb2020 User Guide
Have a look at the manual Canon Maxify Mb2020 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Either TKIP (basic encryption) or AES (secure encryption) is selected automatically for the dynamic encryption method. For details, see Changing the WPA/WPA2 Detailed Settings . Note • This machine supports WPA/WPA2-PSK (WPA/WPA2-Personal) and WPA2-PSK (WPA2- Personal). 911
The Message Is Displayed on the Computer Screen During Setup The Enter Password Screen Is Displayed During Setup The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the Search Screen "You are connecting the machine to the non encrypted wireless network" Is Displayed The Enter Password Screen Is Displayed During Setup The following screen is displayed if an administrator password is set to the machine which has already been set up to use via a network. Enter the administrator password you have set. Note • An administrator password is already specified for the machine at the time of purchase. For details: About the Administrator Password For improving security, it is recommended to change the administrator password. Changing the Settings in the Admin Password Sheet The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the Search Screen This screen is displayed automatically if the selected access point is encrypted. In this case, configure the details to use the same encryption settings set to the access point. For information on the encryption settings, see Changing the Settings in the Wireless LAN Sheet . "You are connecting the machine to the non encrypted wireless network" Is Displayed 912
Security is not configured on the access point. The machine can still be used, so continue the setupprocedure to complete it. Important • If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party. 913
The Administrator Password Set to the Machine Was Forgotten Initialize the machine settings. Select Reset all , then the administrator password reverts to the default. Reset setting After initializing the machine settings, perform setup with the Setup CD-ROM or perform it according to the instructions on our website. 914
Checking Information about the Network Checking the IP Address or the MAC Address of the Machine Checking the IP Address or the MAC Address of the Computer Checking If the Computer and the Machine, or Computer and the Access Point Can Communicate Checking the Network Setting Information Checking the IP Address or the MAC Address of the Machine To check the IP address or the MAC address of the machine, display the network setting information using the operation panel of the machine or print out the network setting information of the machine. LAN settings Printing Out Network Setting Information To display the network setting information using IJ Network Tool, select Network Information on the View menu. Canon IJ Network Tool Screen Checking the IP Address or the MAC Address of the Computer To check the IP address or MAC address assigned to the computer, follow the procedure below. 1. Select Command Prompt as shown below. • In Windows 8.1 or Windows 8, select Command Prompt from the Start screen. If Command Prompt is not displayed on the Start screen, select the Search charm, then search for " Command Prompt ". • In Windows 7, Windows Vista, or Windows XP, click Start > All Programs > Accessories > Command Prompt . 2. Enter "ipconfig/all" and press the Enter key. The IP addresses and the MAC addresses of the network devices installed on your computer are displayed. When the network device is not connected to the network, the IP address is not displayed. Checking If the Computer and the Machine, or Computer and the Access Point Can Communicate 915
To check that communication is available, perform the ping test.1. Select Command Prompt as shown below. • In Windows 8.1 or Windows 8, select Command Prompt from the Start screen. If Command Prompt is not displayed on the Start screen, select the Search charm, then search for " Command Prompt ". • In Windows 7, Windows Vista, or Windows XP, click Start > All Programs > Accessories > Command Prompt . 2. Type the ping command and the IP address of the target machine or the target access point, and then press the Enter key. ping XXX.XXX.XXX.XXX "XXX.XXX.XXX.XXX" is the IP address of the target device. If the communication is available, a message such as the following is displayed. Reply from XXX.XXX.XXX.XXX: bytes=32 time=10ms TTL=255 When Request timed out is displayed, the communication is not available. Checking the Network Setting Information To check the network setting information of the machine, display the network setting information using the operation panel of the machine or print out the network setting information of the machine. LAN settings Printing Out Network Setting Information 916
Packets Are Sent Steadily While IJ Network Scanner Selector EX is enabled, it periodically transmits packets to check whether it can communicate with the machine over the network. When using the computer in a network environment other than the one used to set up the machine, disable IJ Network Scanner Selector EX. To disable IJ Network Scanner Selector EX, right-click the icon on the notification area on the desktop, then select Disable Canon IJ Network Scanner Selector EX . 917
How to Restore the Machine's Network Settings to Factory Default Important • Note that initialization erases all network settings on the machine, and printing, scanning, or faxing operation from a computer over network may become impossible. To use the machine over network, perform setup with the Setup CD-ROM or perform it according to the instructions on our website. Initialize the network setting using the operation panel of the machine. Reset setting 918
Problems with Printing Printing Does Not Start Paper Jams Paper Does Not Feed Properly/"No Paper" Error Occurs Cannot Print Properly with Automatic Duplex Printing Copying/Printing Stops Before It Is Completed 919
Printing Does Not Start Check1 Make sure that the power plug is securely plugged in, then press the ON button to turn the machine on. While the POWER lamp is flashing, the machine is initializing. Wait until the POWER lamp stops flashing and remains lit. Note • When printing large data such as a photo or graphics, it may take longer to start printing. While the POWER lamp is flashing, the computer is processing data and sending it to the machine. Wait until printing starts. Check2 Make sure that the machine is connected to your computer properly. When the machine is connected to your computer with a USB cable, make sure that the USB cable is securely plugged in to the machine and the computer, then check the followings: • If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to thecomputer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details. • There could also be a problem with the USB cable. Replace the USB cable and try printing again. When you use the machine over LAN, make sure that the machine is set up to be used over network correctly. Check3 Is the access point mode enabled? When you print using a mode other than the access point mode, disable the access point mode in advance. Check4 Are the paper settings identical with those registered to the cassette? When the paper settings are not identical with those registered to the cassette, an error message is displayed. Resolve the error according to the instructions on the LCD. Paper Setting for Printing Note • You can disable the message which prevents misprinting. • To change the setting using the operation panel: Cassette settings • To change the setting using the printer driver: Changing the Printer Operation Mode Check5 If you are printing from the computer and there are any unnecessary print jobs, delete them. 920