Canon Maxify Mb2020 User Guide
Have a look at the manual Canon Maxify Mb2020 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
•If the paper is jammed while printing from a computer or copying in progress: After clearing the paper jam error and pressing the machine's OK button, then the machine resumes printing from the next page where the paper was jammed. As the page where the paper was jammed is not printed, reprint if necessary.When the paper is jammed while duplex printing or duplex copying is in progress, it is possible that the printing or copying order is not as you expect if you resume printing after clearing the paper jam error. In this case, cancel printing and reprint from the beginning. When the paper is jammed while layout printing, 2 on 1 copying, or 4 on 1 copying is in progress, it is possible that some pages are not printed if you resume printing after clearing the paper jam error. In this case, cancel printing and reprint from the beginning.• If you turned off the machine while taking the appropriate action of the paper jam error: All print jobs in the queue are canceled. Reprint if necessary. Note • When reloading the paper, confirm that you are using the paper suited for printing and areloading it correctly. Align the paper guides with the both edges of the paper when you load paper. If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact the service center. 1021
1314Cause Paper is jammed inside the rear cover when performing automatic duplex printing. Action If the paper is jammed inside the rear cover when performing automatic duplex printing, remove the paper following the procedure below. Important • The power cannot be turned off while the machine is sending or receiving a fax, or when the received fax or the unsent fax are stored in the machine's memory. Make sure that the machine has completed sending or receiving all the faxes before unplugging the power cord. If you unplug the power cord, all the faxes stored in the machine's memory are deleted. Note • If you need to turn off the machine to remove jammed paper during printing, press the Stop button to cancel print jobs before turning off the machine. 1. Rotate the machine so that the rear side of the machine faces toward you. 2. If the protective material for the rear cover remains attached, remove it. 3. Open the rear cover. Slide the rear cover to the left then open it. 1022
4. Pull out the paper slowly. Note • Do not touch the inner parts of the machine. • If you cannot pull the paper out, try the following. • Turn the machine off and turn it back on. The paper may be ejected automatically. • Pull out the paper output tray. It becomes easy to pull out the paper. 5. Close the rear cover slowly. Close the rear cover then slide it to the right. Slide the rear cover so that the mark on the rear cover aligns with the mark on the machine. 6. Reload the paper, then press the machine's OK button. • If the paper is jammed while printing the faxes or the fax report in progress: After clearing the paper jam error and pressing the machine's OK button, the machine resumes printing from the page where the paper was jammed. • If the paper is jammed while printing from a computer or copying in progress: 1023
After clearing the paper jam error and pressing the machine's OK button, then the machine resumes printing from the next page where the paper was jammed. As the page where the paper was jammed is not printed, reprint if necessary. When the paper is jammed while duplex printing or duplex copying is in progress, it is possible that the printing or copying order is not as you expect if you resume printing after clearing the paper jam error. In this case, cancel printing and reprint from the beginning. When the paper is jammed while layout printing, 2 on 1 copying, or 4 on 1 copying is in progress, it is possible that some pages are not printed if you resume printing after clearing the paper jam error. In this case, cancel printing and reprint from the beginning.• If you turned off the machine while taking the appropriate action of the paper jam error: All print jobs in the queue are canceled. Reprint if necessary. Note • When reloading the paper, confirm that you are using the paper suited for printing and areloading it correctly. Align the paper guides with the both edges of the paper when you load paper. If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact the service center. 1024
2801Cause The document is jammed in the ADF. Action Remove the document following the procedure below. Important • The power cannot be turned off while the machine is sending or receiving a fax, or when the receivedfax or the unsent fax are stored in the machine's memory. Make sure if the machine completed sending or receiving all the faxes before unplugging the power cord. If you unplug the power cord, all the faxes stored in the machine's memory are deleted. • If the original remains in the ADF by pressing the Stop button while the machine is scanning the document: If you press the Stop button during scanning then the document remained in the ADF, the message about the paper remained in the ADF appears on the LCD. Press the OK button so that the remaining document is automatically fed out. • If the original is jammed in the ADF: Remove the document following the procedure below. 1. If printing is in progress, press the Stop button. 2. Turn off the machine. 3. If a multi-page document is loaded, remove any pages other than the jammed page from the ADF, then open the document feeder cover. 4. Pull out the jammed document from the ADF. 1025
5. Close the document feeder cover, then turn on the machine.When rescanning the document after clearing the error, rescan it from the first page. If you cannot remove the document or the document tears inside the machine, or if the document jam error continues after removing the document, contact the service center. Note • The document may not feed properly depending on the media type, or your environment, such as when the temperature and humidity are either too high or too low. In this case, reduce the number of document pages to approximately half of the loading capacity. If the document still jams, use the platen glass instead. • If the original is jammed in the ADF (from the paper feed side): If the document is jammed in the document output slot, close the document tray as shown in the figure below and pull out the document. When rescanning the document after clearing the error, rescan it from the first page. If you cannot remove the document or the document tears inside the machine, or if the document jam error continues after removing the document, contact the service center. 1026
In Other CasesMake sure of the following: Check1 Are there any foreign objects around the paper output slot? Check2 Are the rear cover attached properly? Check3 Is the paper curled? Load the paper after correcting its curl. 1027
1003Cause Possible causes include the following.• There is no paper in the cassette. • Paper is not loaded in the cassette properly. Action Take the corresponding actions below. • Load paper in the cassette. • Align the paper guides with the both edges of the paper when you load paper in the cassette. After carrying out the above measures, press the OK button to dismiss the error. Note • If you want to cancel printing, press the machine's Stop button. 1028
1200Cause The front cover is open. Action Close the front cover and wait for a while.Do not close it while you are replacing an ink tank.1029
1310Cause The size of paper may not be compatible with automatic duplex printing. Action The sizes of media suitable for auto duplex printing are A4 and Letter. Make sure that the size of the paper loaded in the machine is correct. Pressing the OK button will eject the paper and restart printing from the front side of the next paper The reverse side of the ejected sheet will not be printed.1030