Canon Maxify Mb2020 User Guide
Have a look at the manual Canon Maxify Mb2020 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Removing the USB Flash Drive1. Make sure that the machine is not reading or writing data from/to the USB flash drive. A message is displayed on the LCD during such operations. Important • Do not remove the USB flash drive or turn off the power while the machine is reading or writing data from/to it. Note • If your USB flash drive has the access lamp, refer to the instruction manual supplied with the USBflash drive to check if the reading or writing operation is completed on the USB flash drive. 2. Remove the USB flash drive. Hold the USB flash drive and remove it straightforward from the machine. 191
Replacing an Ink Tank Replacing an Ink Tank Checking the Ink Status 192
Replacing an Ink TankWhen remaining ink cautions or errors occur, the message will appear on the LCD to inform you of the error.Take appropriate action according to the message. A Message Is Displayed Note • If print results become faint or white streaks appear despite sufficient ink levels, see Maintenance Procedure . Replacing Procedure When you need to replace an ink tank, follow the procedure below. Important • If you remove an ink tank, replace it immediately. Do not leave the machine with the ink tank removed. • Use a new ink tank for replacement. Installing a used ink tank may cause the nozzles to clog.Furthermore, with such an ink tank, the machine will not be able to inform you when to replace the ink tank properly. • Once an ink tank has been installed, do not remove it from the machine and leave it out in the open. This will cause the ink tank to dry out, and the machine may not operate properly when it is reinstalled. To maintain optimal printing quality, use an ink tank within six months of first use. Note • Color ink may be consumed even when printing a black-and-white document or when black-and- white printing is specified. Every ink is also consumed in the standard cleaning and deep cleaning of the print head, which may be necessary to maintain the performance of the machine. When an ink tank is out of ink, replace it immediately with a new one. Useful Information about Ink 1. Make sure that the power is turned on, then open the front cover. The replaceable ink tank is displayed on the LCD and the print head holder (A) moves to the replacement position of that ink tank. 193
Caution• Do not hold the print head holder to stop or move it forcibly. Do not touch the print head holderuntil it stops completely. Important • Do not remove an ink tank until a new one is prepared to be installed. • Once you remove an ink tank, the machine will not operate until a new one is installed. • Once you remove an ink tank, the machine will not operate even if the removed ink tank isjust reinstalled. • You cannot remove the ink tank which is not placed at the replacement position. Removing it forcibly may cause the machine to malfunction or damage the machine. • Do not touch the metallic parts or other parts inside the machine. • If the front cover is left open for more than 60 minutes, the print head holder moves to the right. In this case, close and reopen the front cover. Note • If the message for the ink tank replacement is displayed on the LCD, check it and then press the OK button. 2. When an ink tank for replacement is displayed on the LCD, push up the ink tank eject lever (B). The ink tank will be ejected. When you want to replace another ink tank, press the right Function button to select Next and display the screen for the ink tank to replace. Important • Place the removed ink tank into a plastic bag immediately after removing from the machine. Otherwise, ink residue may stain your clothes or the surrounding area. • Do not touch other parts besides the ink tanks. • Discard the empty ink tank according to the local laws and regulations regarding disposal of consumables. • Handle the ink tanks carefully. Do not drop or apply excessive pressure to them. 3. Remove the ink tank from the package. 194
Important • Do not touch the contact (C) and joint (D) of the ink tank. 4. Insert a new ink tank aligning it with the installation guide (E) of the machine. Important • You cannot insert the ink tank in the wrong position. Check the label under the installation position, then install the ink tank in the correct position. 5. Push the ink tank until it snaps firmly into place. 195
6. Press the right Function button to select Exit. If Next is displayed on the screen, it means there is another ink tank that can be replaced. If you want to replace this ink tank, press the right Function button and then repeat procedures from step 2. To exit the ink tank replacement, press the right Function button until Exit is displayed on the screen. The print head holder moves to the standby position. You cannot remove the ink tank while at this position. Important • You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks. • An installed ink tank cannot be removed until the message to replace it is displayed. 7. Close the front cover. 196
After replacing the ink tanks, the machine starts mixing the ink automatically. Wait until the machinehas stopped making operating noise. (This takes about 1 to 2 minutes.) Note • If the error message appears on the LCD, take appropriate action. A Message Is Displayed • If the print head is out of alignment, as indicated by misaligned printed ruled lines or similar symptoms, align the print head . • The machine may make noise during operation. 197
Checking the Ink Status from Your ComputerYou can check the remaining ink level and the ink tank types for your model.1. Open the printer driver setup window 2. Launching the Canon IJ Status Monitor On the Maintenance tab, click View Printer Status . The Canon IJ Status Monitor opens and displays an image of the ink status. Note • The information displayed on the Canon IJ Status Monitor may differ depending on the country or region where you are using your printer. 3. If necessary, click Ink Details You can check the ink-related information. If a warning or error related to the remaining ink amount occurs, a notification icon is displayed at the top of the image in the Ink Details dialog box. In such cases, take the appropriate action as described on the screen. Note • You can also display the Ink Details dialog box by selecting the ink icon on the Canon IJ Status Monitor. 198
Checking the Ink Status Checking the Ink Status with the LCD on the Machine You can also check the ink status on the computer screen. Checking the Ink Status from Your Computer 199
Checking the Ink Status with the LCD on the Machine1. Make sure that the power is turned on, and display the HOME screen. If the HOME screen is not displayed, press the HOME button to display it. 2. Press the center Function button on the HOME screen. LCD and Operation Panel A symbol appears in the area (A) if there is any information about the remaining ink level. Example: Ink tank is running low. Prepare a new ink tank. Note • The above screen shows estimated ink levels. • The Current estimated ink levels screen can also be displayed by selecting Setup in the HOME screen and selecting Estimated ink levels in the setup menu. • To display and print the model number of the ink tank, select Ink number by pressing the right Function button. • You can also check the ink status on a screen of the LCD displayed while printing. • You can also check the ink status on the computer screen. Checking the Ink Status from Your Computer 200