Canon Maxify Mb2020 User Guide
Have a look at the manual Canon Maxify Mb2020 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Forwarding Scanned Data to the Computer Using the Operation Panel of the Machine Before forwarding scanned data to the computer, confirm the following:• MP Drivers are installed. If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from our website. • The machine is connected to a computer correctly. Make sure that the machine is connected to the computer correctly. Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in the sleep or standby mode. If you perform scanning via a network connection, make sure that all the required settings have been specified. Network Scan Settings • The destination and the file name are specified in Canon IJ Scan Utility. You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of Canon IJ Scan Utility: Settings Dialog Box 1. Make sure that the machine is turned on. 2. Select Scan on the HOME screen. LCD and Operation Panel The screen for selecting to which you save the data is displayed. 3. Select PC , then press the OK button. 4. Use the button to select the computer to forward the scanned data, then press the OK button. Select Local (USB) for a USB-connected computer, or select the computer to forward the scanned data for a network-connected computer. 741
The Scan standby screen is displayed. Note • When you forward the scanned data to the computer using WSD (one of the network protocolssupported in Windows 8.1, Windows 8, Windows 7, and Windows Vista), select Enable for WSD scan from this device on WSD setting on Other settings in LAN settings under Device settings . WSD setting If you press the left Function button, the machine starts searching for the connected computers again. 5. Use the button to select the document type. Note • When you forward the scanned data to the computer searched using WSD, you cannot select the document type. Document Scans the original on the platen glass or in the ADF as a document data applying the settings specified in Scan settings . Photo Scans the original on the platen glass as a photo data applying the settings specified in Scan settings . 6. Press the right Function button to adjust the settings as necessary. Setting Items for Scanning Using the Operation Panel of the Machine 742
Note• Pressing the left Function button on the Scan standby screen allows you to register the current scan settings as a custom setting. Registering the Favorite Settings (Custom profiles) 7. Load the original document on the platen glass or in the ADF. 8. Press the Color button for color scanning, or the Black button for black & white scanning. Note • When you forward the scanned data to the computer using WSD, press the Color button. • If the original is not loaded properly, a message is displayed on the LCD. Load the original on the platen glass or in the ADF according to the scan settings. • If you load the original in the ADF: The machine starts scanning and scanned data is forwarded to the computer. • If you load the original on the platen glass: ◦ When you select JPEG or TIFF for Format on the scan setting screen, the machine starts scanning and scanned data is forwarded to the computer. ◦ When you select PDF or Compact PDF for Format on the scan setting screen, the confirmation screen asking you if you continue scanning is displayed after scanning is complete. If you continue scanning, load the original on the platen glass and start scanning. If you do not continue scanning, press the left Function button. The scanned data is forwarded to the computer. Scanned data is forwarded to the computer according to the settings specified in Canon IJ Scan Utility. Remove the original on the platen glass or from the document output slot after scanning is complete. When the program selection screen is displayed: • If you are using Windows 8.1, Windows 8, Windows 7, or Windows Vista: The program selection screen may be displayed after pressing the Color or Black button. In this case, select Canon IJ Scan Utility and click OK. • If you are using Windows XP: The program selection screen may be displayed after pressing the Color or Black button for the first time. In this case, specify Canon IJ Scan Utility as the application software to use, select Always use this program for this action , then click OK. From the next time, Canon IJ Scan Utility is automatically started. If you want to scan originals with advanced settings, or if you want to edit or print the scanned images: If you scan originals from a computer, you can edit the scanned images, such as optimizing or trimming. 743
In addition, you can edit or print the scanned images using the compatible application software to makebetter use of them. Scanning with IJ Scan Utility Note • You can use a WIA-compliant application software and the Control Panel (Windows XP only) to scan originals with this machine. For details: Other Scanning Methods • If you want to convert a scanned document to text: Extracting Text from Scanned Images (OCR) 744
Attaching the Scanned Data to E-mail Using the Operation Panel of the Machine Before attaching scanned data to an e-mail, confirm the following:• MP Drivers are installed. If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from our website. • The machine is connected to a computer correctly. Make sure that the machine is connected to the computer correctly. Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in the sleep or standby mode. If you perform scanning via a network connection, make sure that all the required settings have been specified. Network Scan Settings • The mail software and the file name are specified in Canon IJ Scan Utility. You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of Canon IJ Scan Utility: Settings Dialog Box 1. Make sure that the machine is turned on. 2. Select Scan on the HOME screen. LCD and Operation Panel The screen for selecting to which you save the data is displayed. 3. Select Attach to E-mail , then press the OK button. 4. Use the button to select the computer to forward the scanned data, then press the OK button. Select Local (USB) for a USB-connected computer, or select the computer to forward the scanned data for a network-connected computer. 745
The Scan standby screen is displayed. 5. Use the button to select the document type. Document Scans the original on the platen glass or in the ADF as a document data applying the settingsspecified in Scan settings . Photo Scans the original on the platen glass as a photo data applying the settings specified in Scan settings . 6. Press the right Function button to specify the settings as necessary. Setting Items for Scanning Using the Operation Panel of the Machine Note • Pressing the left Function button on the Scan standby screen allows you to register the current scan settings as a custom setting. Registering the Favorite Settings (Custom profiles) 7. Load the original document on the platen glass or in the ADF. 8. Press the Color button for color scanning, or the Black button for black & white scanning. Note • If the original is not loaded properly, a message is displayed on the LCD. Load the original on the platen glass or in the ADF according to the scan settings. • If you load the original in the ADF: The machine starts scanning and scanned data is forwarded to the computer and attached to an e- mail. • If you load the original on the platen glass: ◦ When you select JPEG for Format on the scan setting screen, the machine starts scanning and scanned data is forwarded to the computer and attached to an e-mail. ◦ When you select PDF or Compact PDF for Format on the scan setting screen, the confirmation screen asking you if you continue scanning is displayed after scanning is complete. If you continue scanning, load the original on the platen glass and start scanning. 746
If you do not continue scanning, press the left Function button. The scanned data is forwarded to the computer and attached to an e-mail. Scanned data is forwarded to the computer and attached to an e-mail according to the settings specified in Canon IJ Scan Utility. For the settings or how to send an e-mail, refer to the mail software's instruction manual. Remove the original on the platen glass or from the document output slot after scanning is complete. When the program selection screen is displayed:• If you are using Windows 8.1, Windows 8, Windows 7, or Windows Vista: The program selection screen may be displayed after pressing the Color or Black button. In this case, select Canon IJ Scan Utility and click OK. • If you are using Windows XP: The program selection screen may be displayed after pressing the Color or Black button for the first time. In this case, specify Canon IJ Scan Utility as the application software to use, select Always use this program for this action , then click OK. From the next time, Canon IJ Scan Utility is automatically started. 747
Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine You can save scanned data on the USB flash drive directly. Important • Do not remove the USB flash drive from the machine under the following conditions: • While scanning is in progress • Before saving the scanned data • For safety reasons, we recommend backing up the scanned data saved on a USB flash drive to anothermedia periodically to avoid unexpected accidents. • We assume no responsibility for damage to or loss of data for whatever reason even within the warrantyperiod. 1. Make sure that the machine is turned on. 2. Select Scan on the HOME screen. LCD and Operation Panel The screen for selecting to which you save the data is displayed. 3. Insert the USB flash drive into the USB flash drive port. 4. Select USB flash drive , then press the OK button. Note • When the message informing you that the operation restriction is enabled, ask the administrator of the machine you are using. For details on the operation restriction of the machine: About the Machine Administration 5. Select Save to USB flash drive , then press the OK button. The Scan standby screen is displayed. 748
6.Use the button to select the document type. DocumentScans the original on the platen glass or the ADF as a document data applying the settings specified in Scan settings . Photo Scans the original on the platen glass as a photo data applying the settings specified in Scan settings . 7. Press the right Function button to adjust the settings as necessary. Setting Items for Scanning Using the Operation Panel of the Machine Note • Pressing the left Function button on the Scan standby screen allows you to register the current scan settings as a custom setting. Registering the Favorite Settings (Custom profiles) 8. Load the original document on the platen glass or in the ADF. 9. Press the Color button for color scanning, or the Black button for black & white scanning. Note • If the original is not loaded properly, a message is displayed on the LCD. Load the original on the platen glass or in the ADF according to the scan settings. • If you select ON for Preview on the scan setting screen: The preview screen is displayed before saving the scanned original on the USB flash drive. If ON is selected for Preview on the scan settings screen, the preview screen is displayed on the LCD after scanning. To rescan the original, press the left Function button. If you select PDF or Compact PDF for Format on the scan setting screen, you can rotate the scanning image on the preview screen by pressing the right Function button. To start saving, press the OK button. • If you load the original in the ADF: The machine starts scanning and scanned data is saved on the USB flash drive. • If you load the original on the platen glass: ◦ When you select JPEG for Format on the scan settings screen, the machine starts scanning and scanned data is saved on the USB flash drive. 749
◦When you select PDF or Compact PDF for Format on the scan settings screen, the confirmation screen asking you if you continue scanning is displayed after scanning is complete. If you continue scanning, load the original on the platen glass and start scanning. If you do not continue scanning, press the left Function button. The scanned data is saved on the USB flash drive in one PDF file. When you scan the originals continuously, you can save up to 100 pages of images in one PDF file. Remove the original on the platen glass or from the document output slot after scanning is complete. Note • If the USB flash drive becomes full while scanning images is in progress, only the images already scanned can be saved. • You can save up to 2000 files of scanned data in both PDF and JPEG data format. • The folder and file name of scanned data saved on the USB flash drive is as follows: • Folder name: (file extension: PDF): CANON_SC\DOCUMENT\0001 • Folder name: (file extension: JPG): CANON_SC\IMAGE\0001 • File name: Running numbers, starting from SCN_0001 • File date: The date and time of saving as set in the machine. For details on how to set the date and time: Setting the Sender Information • Importing the Scanned Data Saved on a USB Flash Drive to the Computer You can import the scanned data saved on a USB flash drive to the computer. After scanning the data, connect the USB flash drive to the computer, then import the data. 750