Home > Canon > Printer > Canon I Sensys Mf8580cdw User Guide

Canon I Sensys Mf8580cdw User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon I Sensys Mf8580cdw User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 750
    							If  you  select  [Accept]:
    The Product Extended Survey Program (the program to investigate  the  state  of usage) will  be installed.
    The Product Extended Survey Program is the  program to send  the  information  related to the  usage of this  machine  to Canon
    every month  for  ten  years. Any other information  including  your  personal information  is not  sent. You  can also uninstall the  Product Extended Survey Program.
    Uninstalling  the  Product Extended Survey Program (For Windows) 
    13
    Confirm that the  application is  selected []  under [Install] and  click [Next].
    14
    Restart your  computer.
    (1) Select  the  [Restart Computer  Now  (Recommended)] check box.
    (2) Click  [Restart].Remove the  CD- ROM  once  this  screen  appears.
    >Ý>á>Ì>Û>Ì>ã>à
     
    						
    							In the  case of USB connection, wait  until your  computer  is restarted.
    USB Cable Connection (Only  when  Connecting with  USB) In the  case of network connection, check the  installation results.
    Checking  the  Installation  Results  (For Windows) 
    >Ý>â>Ì>Û>Ì>ã>à
     
    						
    							0AWU-007
    1
    Insert the  User  Software  CD - ROM  into the  slot on  your  computer.
    2
    Click  [Custom  Installation].
    The options to be displayed differ depending on your  country or region.
    If  the  above CD - ROM  Setup  screen does not  appear:
    Windows XP and  Server  2003 1. From  the  [Start] menu,  select [Run].
    2. Enter  D:\MInst.exe, and then  click  [OK].
    Windows Vista,  7, and  Server  2008 1. Enter  D:\MInst.exe  in  [Start  Search] or [Search programs and files] under  the  [Start] menu.
    2. Press  the  [ENTER]  key  on the  keyboard.
    Windows 8 and  Server  2012 1. Right - click  the  lower - left  corner of the  screen  and select [Run].
    2. Enter  D:\MInst.exe, and then  click  [OK]. * The CD- ROM  drive  name is indicated  as D:  in  this  manual.  The CD- ROM  drive  name may differ depending onthe  computer  you are using.
    Installing Using [Custom Installation] (For Windows)
    >Ý>ã>Ì>Û>Ì>ã>à
     
    						
    							If  the  language  selection screen is  displayed before the  CD - ROM  setup screen appears:
    Select  the  language and click  [OK].
    3
    When  the  following screen appears, select  the  connection method to a computer.
    For  USB  Connection:
    Select  [USB  Connection], and click  [Next].
    For  Network Connection:
    Select  [Network  Connection], and click  [Next].
    NOTE
    Windows Server  2003/Server 2008/Server 2012:
    This screen  is not  displayed. Proceed to the  following procedure.
    4
    Select the  check box  next to the  application you  want to install  and  click [Install].
    >Ý>ä>Ì>Û>Ì>ã>à
     
    						
    							The options to be displayed differ depending on your  country or region.
    5
    Read  the  License Agreement  and  click [Yes].
    6
    Click  [Next].
    >Ý>å>Ì>Û>Ì>ã>à
     
    						
    							The following screen  appears. Click  [Yes].
    For  USB  Connection:Proceed to step 13 .
    For  Network Connection: Proceed to step 7 .
    7
    Select the  machine to be  installed.
    (1) Select  the  machine.
    (2) Click  [Next].
    If  no  machines are  displayed in [Device List]:
    Perform  the  following procedure.
    >Þ>Ü>Ì>Û>Ì>ã>à
     
    						
    							1. Check the  following.The computer  and machine  are connected via the  network.
    The machine  is turned on.
    The IP  address  is set  correctly.
    The computer  and machine  are on the  same subnet.
    Security software  has been exited.
    2. Click  [Update Device List].
    If  any machines are not  displayed by performing  the  above procedure,  perform the  following procedure. 1. Click  [Search by IP  Address].
    2. Enter  the  IP  address  of the  machine  to be installed. Confirming IP  Address Settings
    If  the  IP  address  of the  machine  is between  169.254.1.0  and 169.254.254.255, the  IP  address  is the  one
    assigned  by the  AutoIP  function.
    If  an IP  address  other than  link- local addresses is set  for  the  computer, set  an IP  address  in  the  same subnet
    as the  computer  (other than  link- local addresses)  also for  this  machine  manually.
    This enables the  installer to search  for  this  machine.
    e - Manual - > Setting  IPv4  Address
    3. Click  [OK].
    8
    Select the  function you  want to use.
    (1) Select  the  function you want to use (driver to be installed).
    (2) Click  [Next].
    [Printer] Select  when  using  the  print  function.
    [Fax  (for Supported
    Models)] Select  when  using  the  PC  fax  function.  (This function sends documents or images that were  created
    on a  computer  directly  as a  fax  transmission.)
    [Scanner] Select  when  using  the  scan function.
    If  another  Select  Driver screen  is displayed, repeat this  step until the  Confirm Settings screen  is displayed.
    >Þ>Ý>Ì>Û>Ì>ã>à
     
    						
    							9
    Set the  printer or fax information.(1) Specify the  settings for  each  option as needed.
    (2) Click  [Next].
    Printer information
    *1Fax  information*2
    *1Appears if you selected [Printer] in  step 8 .
    *2Appears if you selected [Fax  (for Supported Models)] in  step  8.
    [Printer Name] Enter  a  new name if you want to change the  printer or fax  name.
    [Fax  Name]
    [Use as Shared
    Printer] Select  the  check box to share the  printer or fax.
    [Use as Shared
    Fax]
    [Shared Name] Change the  shared name as needed.
    NOTE
    If  you  selected the  [Use as Shared Printer] or [Use as Shared Fax]  check box:
    Install the  additional driver as follows. 1. Click  [Drivers to Add].
    2. Select  the  operating  system  displayed in  [Drivers to Add].
    3. Click  [OK].
    If  a  64- bit operating  system  is running on a  computer  on which  the  installation is being performed, the  download
    installation (installation from a  network) for  a  client  computer  on which  any of the  following 32- bit operating  systems is
    running is not  supported due to a  Windows restriction. Windows XP  (on which  no service  pack or SP1 is installed)
    Windows Server  2003 (on which  no service  pack is installed)
    >Þ>Þ>Ì>Û>Ì>ã>à
     
    						
    							If  you download and install  the  software  on any of the  above 32- bit operating  systems,  you may fail to install  the  software
    and may not  be able to open the  printing preferences dialog box.
    If  any of the  following 32- bit operating  systems is running on a  computer  on which  the  installation is being performed, the
    additional driver for  a  64- bit operating  system  cannot  be installed.Windows XP  (on which  no service  pack or SP1 is installed)
    Windows Server  2003 (on which  no service  pack is installed)
    10
    Click  [Start] to start installation.
    11
    Select the  machine you  would like to make  your  default printer.
    (1) Select  the  machine  you would like to make your  default  printer.
    (2) Click  [Next].This screen  appears only when  installing the  printer driver and fax  driver.
    12
    Select to print  a test  page.
    (1) Select  the  check box to print  a  test page.
    >Þ>ß>Ì>Û>Ì>ã>à
     
    						
    							(2) Click  [Next].This screen  appears only when  installing the  printer driver and fax  driver.
    13
    Click  [Exit].
    For  USB  Connection:
    For  Network Connection:
    Next,  installation of MF Toolbox  starts.
    In any of the  following cases, MF Toolbox  is not  installed.  Proceed to step  17.
    If  you are using  Windows Server  2003/Server 2008/Server 2012
    If  you cleared the  [MF Toolbox] check box in  step  4
    14
    Click  [Next].
    >Þ>à>Ì>Û>Ì>ã>à
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon I Sensys Mf8580cdw User Guide