Xerox WorkCentre 3045 Service Manual
Have a look at the manual Xerox WorkCentre 3045 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-71Service Parts Disassembly Bottom Plate PL2.2.8 1. Remove the Main Tray (page 4-58). 2. Remove the Front Cover (page 4-60). 3. Remove the Inner Front Cover (page 4-62). 4. Remove the Left Cover (page 4-64). 5. Remove the Right Cover (page 4-57). 6. Remove the Scanner (page 4-109). 7. Disconnect P/J7601 from the Front USB Board. 8. Disconnect P/J6501 from the WiFi Adaptor. 9. Remove the Top Cover (page 4-7). 10. Remove the Rear Cover (page 4-11). 11. Remove the Toner Motor (page 4-37). 12. Remove the Toner Dispense Assembly (page 4-36). 13. Remove the Fuser (page 4-38). 14. Remove the Main Drive Assembly (page 4-40). 15. Remove the Main Drive Motor (page 4-41). 16. Remove the Power Switch Assembly (page 4-46). 17. Remove the MCU Board (page 4-43). 18. Remove the IP Board (page 4-45). 19. Remove the LVPS (page 4-48). 20. Remove the IP Board bracket (page 4-106). 21. Remove the LVPS bracket (page 4-107). 22. Remove the Rear Door Interlock Switch (page 4-44). 23. Remove the xerographics assembly (page 4-33). 24. Remove the Feed Gear and Spring (page 4-25). 25. Remove the Feed Roller (page 4-17).
4-72 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service Service Parts Disassembly 26. Remove the bottom chute. 27. Release the hook that secures the cam follwer bearings and remove the bearings and followers from the chassis. s3040-053 s3040-031
Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-73Service Parts Disassembly 28. Flex the Bottom Plate to release one end from the chassis and remove. Replacement Note Attach the spring to the Bottom Plate before installing the followers. s3040-122
4-74 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service Service Parts Disassembly Separator Pad Assembly PL2.2.15 1. Remove the Rear Door (page 4-8). 2. Press inward on the left side retainer to release the left side boss and remove the lower chute. 3. Remove the Registration Sensor Actuator (page 4-28). s3040-074
Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-75Service Parts Disassembly 4. Release the hook at each side of the housing to release the assembly from the chassis. s3040-033
4-76 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service Service Parts Disassembly Feed Gear and Spring PL2.2.19 Caution The gears of the Main Drive Assembly are not captive to the cover. Use care when removing the cover to maintain the correct gear orientation. 1. Remove the Main Tray (page 4-58). 2. Remove the Front Cover (page 4-60). 3. Remove the Inner Front Cover (page 4-62). 4. Remove the Left Cover (page 4-64). 5. Remove the Right Cover (page 4-57). 6. Remove the Scanner (page 4-109). 7. Disconnect P/J7601 from the Front USB Board. 8. Disconnect P/J6501 from the WiFi Adaptor. 9. Remove the Top Cover (page 4-52). 10. Remove the Rear Cover (page 4-56). 11. Remove the IP Board (page 4-103). 12. Remove the Fax Board if present (page 4-105). 13. Remove the IP Board Bracket (page 4-106). 14. Remove the Main Drive Assembly (page 4-40). 15. Release the spring from the hook on the chassis. 16. Release the hook that secures the Feed Gear to the shaft. s3040-054
Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-77Service Parts Disassembly Registration Pinch Roller PL2.3.2 1. Remove the Main Tray (page 4-58). 2. Remove the Front Cover (page 4-60). 3. Remove the Inner Front Cover (page 4-62). 4. Remove the Left Cover (page 4-64). 5. Remove the Right Cover (page 4-57). 6. Remove the Scanner (page 4-109). 7. Disconnect P/J7601 from the Front USB Board. 8. Disconnect P/J6501 from the WiFi Adaptor. 9. Remove the Top Cover (page 4-52). 10. Remove the Rear Cover (page 4-56). 11. Remove the IP Board (page 4-103). 12. Remove the Fax Board if present (page 4-105). 13. Remove the IP Board Bracket (page 4-106). 14. Remove the LVPS (page 4-48). 15. Remove the LVPS bracket (page 4-107).
4-78 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service Service Parts Disassembly 16. Remove the registration springs and bearings from the ends of the pinch roller shaft and remove the shaft from the chassis. s3040-034
Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-79Service Parts Disassembly Registration Roller PL2.3.1 Caution The gears of the Main Drive Assembly are not captive to the cover. Use care when removing the cover to maintain the correct gear orientation. 1. Remove the Main Tray (page 4-58). 2. Remove the Front Cover (page 4-60). 3. Remove the Inner Front Cover (page 4-62). 4. Remove the Left Cover (page 4-64). 5. Remove the Right Cover (page 4-57). 6. Remove the Scanner (page 4-109). 7. Disconnect P/J7601 from the Front USB Board. 8. Disconnect P/J6501 from the WiFi Adaptor. 9. Remove the Top Cover (page 4-52). 10. Remove the Rear Cover (page 4-56). 11. Remove the IP Board (page 4-103). 12. Remove the Fax Board if present (page 4-105). 13. Remove the IP Board Bracket (page 4-106). 14. Remove the Main Drive Assembly (). 15. Remove the LVPS (page 4-48). 16. Remove the LVPS bracket (page 4-107). 17. Remove the registration pinch roller (page 4-77). 18. Remove the registration gear, clutch and spring from the Registration Roller shaft.
4-80 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service Service Parts Disassembly 19. Remove the bearing from each end of the roller shaft, then remove the roller from the chassis. s3040-077