Home > Toshiba > Communications System > Toshiba Perception 1 2 User Manual

Toshiba Perception 1 2 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Toshiba Perception 1 2 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							FAULT FINDING 
    SECTION 200-255-500 
    MARCH 1991 
    CHART NO. 16 
    COMMON STATION FEATURE FAULTS (continued) 
    IMPORTANT: 
    This step will ha/t all call 
    processing. It is advisable to 
    wait until all trunks and stations 
    are idle before performing this 
    step. Notify system users that the 
    system will be temporarily down. Press the INIT 
    key on the NPRU 
    momentarily. (Wait 
    a few seconds for 
    initialization to be 
    Press the LOAD 
    key on the NPRU 
    momentarily. (Wait 
    about 30 seconds 
    for reload to be 
    completed.) 
    -28-  
    						
    							FAULT FINDING 
    SECTION 200-255-500 
    MARCH 1991 
    CHART NO. 16 
    COMMON STATION FEATURE FAULTS (continued) 
    Replace the 
    NTWU. Replace the 
    NPRU. 
    -29-  
    						
    							FAULTFINDING 
    SECTION 200-255-500 
    MARCH 1991 
    CHART NO. 16 
    COMMON STATION FEATURE FAULTS (continued) 
    IMPORTANT: 
    This step will halt all call 
    processing. It is advisable to 
    wait until all trunks and 
    stations are idle before 
    performing this step. Notify 
    system users that the system 
    will be temporarily down. 
    .-----_ 
    Press the INIT 
    key on the NPRU 
    momentarily. (Wait 
    a few seconds for 
    initialization to be 
    completed.) 
    Press the LOAD 
    key on the NPRU 
    momentarily. (Wait 
    about 30 seconds 
    for reload to be 
    completed.) 
    1 NO 
    the system 
    resoond at all to 
    c-- 
    : ” 
    i 
    -3o-  
    						
    							FAULT FINDING 
    SECTION 200-255-500 
    MARCH 1991 
    CHART NO. 17 
    SPEECH PATH OR DIAL TONE FAULTS 
    From n 
    / P  
    / Did  
    25004ype phones in 
    NRCU. 
    Tn - A +/ YES 
    E v 1 -forrepair. I- 
    1 YES I 
    -31-  
    						
    							FAULT FINDING 
    SECTION 200-255-500 
    MARCH 1991 
    CHART NO. 17 
    SPEECH PATH OR DIAL TONE FAULTS (continued) 
    IMPORTANT: 
    This step will halt all call 
    processing. It is advisable 
    to wait until all trunks and 
    stations are idle before 
    performing this step. Notiv 
    system users that the system 
    will be temporarily down. Press the INIT 
    key on the NPRU 
    momentarily. (Wait 
    a few seconds for 
    initialization to be 
    completed.) 
    Press the LOAD 
    key on the NPRU 
    momentarily. (Wait 
    about 30 seconds 
    for reloading to 
    be completed.) 
    1 NO 
    From n 
    -32-  
    						
    							FAULTFINDING 
    SECTION 200-255-500 
    MARCH1991 
    CHART NO. 17 
    SPEECH PATH OR DIAL TONE FAULTS (continued) 
    I Replace the 
    NTWU. 
    Tag the 
    defective unit(s) 
    and return 
    for repair. 
    I 
    23 END 
    -33-  
    						
    							FAULT FINDING. 
    SECTION 200-255-500 
    MARCH 1991 
    CHART NO. 18 
    DATA/SPEECH PATH OR DIAL TONE FAULTS 
    Start here to 
    c/ear Data/Speech 
    Path or Dial 
    Tone faults. 
    I 
    NOTE: If there are 
    2500-type phones only, 
    I __--__ 
    the answer is NO. 
    I 
    .L electronic/digital telephones 
    25004ype phones 
    in the system, are 
    defective unit(s) 
    and return 
    i 
    -34-  
    						
    							FAULT FINDING 
    SECTION 200-255-500 
    MARCH1991 
    CHART NO. 18 
    DATA/SPEECH PATH OR DIAL TONE FAULTS (continued) 
    Press the INIT 
    key on the NPRU 
    momentarily. (Wait 
    a few seconds for 
    initialization to be 
    completed.) 
    Press the LOAD 
    key on the NPRU 
    momentarily. (Wait 
    about 30 seconds 
    for reloading to 
    be completed.) 
    the INIT or LOAD 
    1 YES Replace the 
    LCCU. 
    Tag the 
    defective unit(s) 
    and return 
    for repair. 
    23 END there are SlTs  there are SlTs 
    -35-  
    						
    							FAULT FINDING 
    SECTION 200-255-500 
    MARCH 1991 
    CHART NO. 19 
    DIALING FAULTS 
    Replace the 
    NRCU. 
    Tag the 
    defective unit(s) 
    and return ;=.. 
    , ,: 
    ‘:- , 
    -36-  
    						
    							FAULT FINDING 
    SECTION 200-255-500 
    MARCH 1991 
    CHART NO. 19 
    DIALING FAULTS 
    (continued) 
    Press the INIT 
    key on the NPRU 
    momentarily. (Wait 
    a few seconds for 
    initialization to be 
    completed.) 
    I The following instktions 
    will cause all calls in 
    and no new calls will be 
    Do not continue while Replace the 
    LCCU. 
    I I 
    Press the LOAD 
    key on the NPRU 
    momentarily. (Wait 
    about 30 seconds 
    for reloading to 
    be completed.) 
     cleared? / 
    to the INIT or 
    cycle completed? Tag the 
    defective unit(s) 
    and return 
    for repair. 
    i 
    END 
    NO 
    To 
    6 
    Kl 
    Page 23 
    -37-  
    						
    All Toshiba manuals Comments (0)

    Related Manuals for Toshiba Perception 1 2 User Manual