Ricoh Aficio MP 6500 User Manual

							Stamp
113
3
❖Stamp Format
You can specify how each of stamp is printed.
Stamp Position
You can specify where to print the stamp.
Top Left
Top Centre
Top Right
 Centre Left
Centre
 Centre Right
Bottom Left
Bttm Centre
 Bottom Right
Stamp Position
You can adjust the position of the stamp within the available range as
shown below.
Metric version:
 Top Left…T/B: 4-144mm, L/R: 4-144mm
 Top Centre…T/B: 4-144mm, L/R: 72-72mm
 Top Right…T/B: 4-144mm, L/R: 4-144mm
 Centre Left…T/B: 72-72mm, L/R: 4-144mm
 Centre…T/B: 72-72mm, L/R: 72-72mm
 Centre Right…T/B: 72-72mm, L/R: 4-144mm
 Bottom Left…T/B: 4-144mm, L/R: 4-144mm
 Bttm Centre…T/B: 4-144mm, L/R: 72-72mm
 Bottom Right…T/B: 4-144mm, L/R: 4-144mm
Inch version:
 Top Left…T/B: 0.1-5.7, L/R: 0.1-5.7
 Top Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
 Top Right…T/B: 0.1-5.7, L/R: 0.1-5.7
 Centre Left…T/B: 2.8-2.8, L/R: 0.1-5.7
 Centre…T/B: 2.8-2.8, L/R: 2.8-2.8
 Centre Right…T/B: 2.8-2.8, L/R: 0.1-5.7
 Bottom Left…T/B: 0.1-5.7, L/R: 0.1-5.7
 Bttm Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
 Bottom Right…T/B: 0.1-5.7, L/R: 0.1-5.7
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
114
3
Size
You can set the size of the stamp.
1 X
2 X
4 X
Density
You can set the pattern used to print the stamp.
Normal
The stamp is printed on the image. You cannot check which parts will
overlap.
Lighter
The image can be seen through the stamp.
Lightest
The image appears even clearer than in the Lighter setting.
 Page to Stamp
You can have the stamp printed on the first page or all pages.
All Pages
1st Page Only
Reference
Preset Stamp, Copy/ Document Server Reference
User Stamp
This section describes various items of [User Stamp] under [Stamp].
❖Program / Delete Stamp
You can register, change, or delete these designs as user stamps.
You can register up to four custom stamps with your favourite designs.
❖Stamp Format:1, Stamp Format:2, Stamp Format:3, Stamp Format:4
You can specify how each of registered User Stamps 1 to 4 is printed.
Stamp Position
You can specify where to print the User Stamp.
Top Left
Top Centre
Top Right
 Centre Left
Centre
 Centre Right
Bottom Left
Bottom Centre
 Bottom Right
Downloaded From ManualsPrinter.com Manuals 
						

							Stamp
115
3
Stamp Position
You can adjust the position of the User Stamp within the available range
as shown below.
Metric version:
 Top Left…T/B: 4-144mm, L/R: 4-144mm
 Top Centre…T/B: 4-144mm, L/R: 72-72mm
 Top Right…T/B: 4-144mm, L/R: 4-144mm
 Centre Left…T/B: 72-72mm, L/R: 4-144mm
 Centre…T/B: 72-72mm, L/R: 72-72mm
 Centre Right…T/B: 72-72mm, L/R: 4-144mm
 Bottom Left…T/B: 4-144mm, L/R: 4-144mm
 Bttm Centre…T/B: 4-144mm, L/R: 72-72mm
 Bottom Right…T/B: 4-144mm, L/R: 4-144mm
Inch version:
 Top Left…T/B: 0.1-5.7, L/R: 0.1-5.7
 Top Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
 Top Right…T/B: 0.1-5.7, L/R: 0.1-5.7
 Centre Left…T/B: 2.8-2.8, L/R: 0.1-5.7
 Centre…T/B: 2.8-2.8, L/R: 2.8-2.8
 Centre Right…T/B: 2.8-2.8, L/R: 0.1-5.7
 Bottom Left…T/B: 0.1-5.7, L/R: 0.1-5.7
 Bttm Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
 Bottom Right…T/B: 0.1-5.7, L/R: 0.1-5.7
 Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
All Pages
1st Page Only
Reference
User Stamp, Copy/ Document Server Reference
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
116
3
Date Stamp
This section describes various items of [Date Stamp] under [Stamp].
❖Format
You can select the date format for Date Stamp mode.
 MM / DD / YYYY
 MM.DD.YYYY
DD / MM / YYYY
 DD.MM.YYYY
 YYYY.MM.DD
❖Font
You can select the Date Stamp font.
Font 1
Font 2
Font 3
❖Size
You can set the Date Stamp size.
Auto
Large
 Middle
Small
❖Superimpose
You can have the Date Stamp printed in white when it overlaps black parts of
the image.
On
Off
❖Stamp Setting
You can specify how Date Stamp is printed.
Stamp Position
You can specify where to print the Date Stamp.
Top Left
Top Centre
 Top Right
Bottom Left
Bottom Centre
 Bottom Right
Downloaded From ManualsPrinter.com Manuals 
						

							Stamp
117
3
Stamp Position
You can adjust the position of the Date Stamp within the available range
as shown below.
Metric version:
 Top Left…T/B: 4-144mm, L/R: 4-144mm
 Top Centre…T/B: 4-144mm, L/R: 72-72mm
 Top Right…T/B: 4-144mm, L/R: 4-144mm
 Bottom Left…T/B: 4-144mm, L/R: 4-144mm
 Bttm Centre…T/B: 4-144mm, L/R: 72-72mm
 Bottom Right…T/B: 4-144mm, L/R: 4-144mm
Inch version:
 Top Left…T/B: 0.1-5.7, L/R: 0.1-5.7
 Top Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
 Top Right…T/B: 0.1-5.7, L/R: 0.1-5.7
 Bottom Left…T/B: 0.1-5.7, L/R: 0.1-5.7
 Bttm Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
 Bottom Right…T/B: 0.1-5.7, L/R: 0.1-5.7
 Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
All Pages
1st Page Only
Page Numbering
This section describes various items of [Page Numbering] under [Stamp].
❖Stamp Format
You can select the page number format given priority when [Page Numbering]
is pressed.
P1,P2...
 1/5,2/5...
 -1-,-2-...
 P.1,P.2...
1,2...
 1-1,1-2...
❖Font
You can select the page number printed in Page Numbering mode.
Font 1
Font 2
Font 3
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
118
3
❖Size
You can set the size of the stamp printed in Page Numbering mode.
Auto
Large
 Middle
Small
❖Duplex Back Page Stamping Position
You can set the position of the duplex back page number printed in Duplex
mode.
Opposite Position
 Same Position
❖Page Numbering in Combine
You can set page numbering when using the Combine function and the Page
Numbering function together.
Per Original
Per Copy
❖Stamp on Designating Slip Sheet
You can select to print the page number onto slip sheets when using the Des-
ignate function set to [Copy] and the Page Numbering function together.
On
Off
❖Stamp Position
You can specify how each of stamp is printed.
Stamp Position
You can specify where to print the stamp.
Top Left
Top Centre
Top Right
Bottom Left
Bottom Centre
 Bottom Right
For the patterns of P1, P2, ---, 1/5, 2/5, ---, P.1, P.2, ---, and 1, 2, ---,
the machine is shipped from the factory with this position set to Top
right. For the patterns of -1-, -2-, --- and 1-1, 1-2, ---, the machine has
this position set to Bottom centre.
The setting range is as follows:
Downloaded From ManualsPrinter.com Manuals 
						

							Stamp
119
3
Stamp Position
You can adjust the position of the stam within the available range as shown
below.
Metric version:
 Top Left…T/B: 4-144mm, L/R: 4-144mm
 Top Centre…T/B: 4-144mm, L/R: 72-72mm
 Top Right…T/B: 4-144mm, L/R: 4-144mm
 Bottom Left…T/B: 4-144mm, L/R: 4-144mm
 Bttm Centre…T/B: 4-144mm, L/R: 72-72mm
 Bottom Right…T/B: 4-144mm, L/R: 4-144mm
Inch version:
 Top Left…T/B: 0.1-5.7, L/R: 0.1-5.7
 Top Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
 Top Right…T/B: 0.1-5.7, L/R: 0.1-5.7
 Bottom Left…T/B: 0.1-5.7, L/R: 0.1-5.7
 Bttm Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
 Bottom Right…T/B: 0.1-5.7, L/R: 0.1-5.7
❖Superimpose
You can have page numbers printed in white when they overlap black parts
of the image.
On
Off
❖Page Numbering Initial Letter
Switch the page print language. 
P1,P2.../P.1,P.2...
 S1,S2.../S.1,S.2...
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
120
3
Stamp Text
This section describes various items of [Stamp Text] under [Stamp].
❖Font
You can select the Stamp Text font.
Font 1
Font 2
Font 3
❖Size
You can set the Stamp Text size.
Auto
Large
 Middle
Small
❖Superimpose
You can have the Stamp Text printed in white when it overlaps black parts of
the image.
On
Off
❖Stamp Setting
You can specify how Stamp Text is printed.
Stamp Position
You can specify where to print the Stamp Text.
Top Left
Top Centre
Top Right
Bottom Left
Bottom Centre
 Bottom Right
Downloaded From ManualsPrinter.com Manuals 
						

							Stamp
121
3
Stamp Position
You can adjust the position of the Stamp Text within the available range as
shown below.
Metric version:
 Top Left…T/B: 4-144mm, L/R: 4-144mm
 Top Centre…T/B: 4-144mm, L/R: 72-72mm
 Top Right…T/B: 4-144mm, L/R: 4-144mm
 Bottom Left…T/B: 4-144mm, L/R: 4-144mm
 Bttm Centre…T/B: 4-144mm, L/R: 72-72mm
 Bottom Right…T/B: 4-144mm, L/R: 4-144mm
Inch version:
 Top Left…T/B: 0.1-5.7, L/R: 0.1-5.7
 Top Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
 Top Right…T/B: 0.1-5.7, L/R: 0.1-5.7
 Bottom Left…T/B: 0.1-5.7, L/R: 0.1-5.7
 Bttm Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
 Bottom Right…T/B: 0.1-5.7, L/R: 0.1-5.7
 Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
All Pages
1st Page Only
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
122
3Input/Output
This section describes various items of [Input / Output] under [Copier / Document
Server Features].
Default settings are shown in bold type.
❖Switch to Batch
You can select to have Batch mode or SADF mode displayed when you press
the [Special Original] key.
Batch
SADF
❖SADF Auto Reset
In SADF mode, an original must be set within a specified time after the pre-
vious original has been fed.
You can adjust this time from 3 to 99 seconds in increments of 1 second.
The timing is set to 5 second(s) by default.
❖Rotate Sort: Auto Paper Continue
You can specify to continue copying when paper of the required orientation
has run out during rotatesorting.
On
Copying continues using copy paper of a different orientation. The copy
job will finish even if you have left the machine.
Off
When paper of the required orientation runs out, the machine stops copy-
ing and prompts you to supply copy paper. After you have loaded paper,
the machine will continue copying.
❖Copy Eject Face Method in Glass Mode
You can specify the way in which copies are delivered when copying an orig-
inal placed on the exposure glass.
Face Up
Face Down
❖Copy Eject Face Method in Bypass Mode
You can specify the way in which copies are delivered when copying in By-
pass mode.
Face Up
Face Down
Downloaded From ManualsPrinter.com Manuals