Panasonic Multi Purpose Camera Ak Hc1500g Operating Instructions

							
- 40 (E) -
ENGLISH

Setting of menu items
 SETTING menu
 ����SHUTTER ��    SHUTTER MODE      :OFF  SHUTTER SPEED     :1/100  SYNCHRO SCAN      :60.32Hz
SHUTTER MODE [OFF, ON, SYNCHRO]
For selecting the operation mode of the 
shutter.OFF:  For turning the shutter OFF.
ON:   For setting the shutter speed  which was set by SHUTTER 
SPEED.
SYNCHRO:   For setting the shutter speed  which was set by SYNCHRO 
SCAN.
SHUTTER SPEED
[1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000 
(VIDEO MENU)]
[180.0 deg, 172.8 deg, 144.0 deg, 120.0 deg, 
90.0 deg, 45.0 deg (FILM MENU)]
For setting the shutter speed at the SHUTTER 
ON setting.
SYNCHRO SCAN
[60.32 Hz to 150.0 Hz (*1)]
[50.26 Hz to 125.0 Hz (*2)]
[358.1 deg to 144.0 deg (FILM MENU)]
For setting the shutter speed in the synchro 
scanning mode.
*1:  60p, 60i, 59.94i, 30p or 29.97p format with 
VIDEO MENU
*2:  50p, 50i, 25p, 24p or 23.98p format with 
VIDEO MENU
[2] SHUTTER 
						

							
- 41 (E) -

Setting of menu items
 ����GEN-LOCK ��    GEN-LOCK INPUT    :BNC  H PHASE-COARSE    :+00  H PHASE-FINE      :+000  SD HD PHASE CRS   :+0  SD HD PHASE FINE  :+00
 SETTING menu
GEN-LOCK INPUT [BNC, DSUB]
For selecting whether the sync signals are to 
be input from the BNC or D-SUB connector.
H PHASE-COARSE
[–40 to +40 (720 mode)]
[–60 to +60 (1080 mode)]
For roughly adjusting the horizontal phase.
H PHASE-FINE [–45 to +45]
For finely adjusting the horizontal phase.
SD  HD PHASE CRS [–4 to +4]
For roughly adjusting the phase of the HD 
video signals when SD sync signals have been 
input.
SD  HD PHASE FINE [–99 to +99]
For finely adjusting the phase of the HD video 
signals when SD sync signals have been input.
 ����PIX DEFECT ��    AUTO DETECTION    :READY 
                CNT      R           1      G           5      B           2      Y           1
AUTO DETECTION
When ACTIVE is selected, automatic defect 
compensation processing* is performed, and 
when this processing is completed, the status 
returns to READY.
*  Execute automatic defect compensation 
processing after supplying the power to the 
camera at the normal temperature for at least 
two hours.
[3] GEN-LOCK
[4] PIX DEFECT 
						

							
- 42 (E) -
ENGLISH

Setting of menu items
 ����PROTOCOL ��    PROTOCOL          :1
 SETTING menu
PROTOCOL [1 to 4]
For selecting the remote control 
communication system in accordance with the 
system connected.
1:   Information camera communication 
protocol (EIA422) 
For connecting the AK-HRP150G
2:   Information camera communication 
protocol (EIA232) 
For connecting a PC
3:   Convertible PC control protocol (EIA422)  
For connecting the AW-CB400 
 
(baud rate fixed at 9600 bps)
4:   Convertible PC control protocol (EIA232)  For connecting the AW-PH400 pan/tilt 
head (baud rate fixed at 9600 bps)
The protocol is actually switched after the 
power has been turned off and back on.
[5] PROTOCOL 
						

							
- 43 (E) -

Setting of menu items
 CAMERA ID menu
 ���CAMERA ID �    ID:AK-HC1500
An ID of not more than 10 characters 
consisting of alphanumerics, symbols and 
spaces can be set for the camera.
The camera ID is displayed at all times when 
ON is selected in the CAM ID mode but 
displayed only when color bar signals are 
output in the BAR mode.
The status for setting the ID is established 
by moving the cursor above the colon (:) and 
selecting it.
Move the cursor to the positions of the 
characters to be set, select the characters and 
enter them.
Characters which can be entered:
Spaces, upper-case letters (A to Z), numbers 
(0 to 9), and symbols (' , >, 
						

							
- 44 (E) -
ENGLISH

Setting of menu items
 FILE OPERATION menu
 ���FILE OPERATION �    MODE              :LOAD  LOAD FROM         :USER1
  EXECUTE           :NO
 ���FILE OPERATION �    MODE              :STORE  STORE TO          :USER1
  EXECUTE           :NO
 ���FILE OPERATION �    MODE              :STORE  STORE TO          :USER1
  EXECUTE           :YES
MODE [LOAD/STORE]
Select LOAD when settings are to be loaded 
from a file; select STORE when the current 
settings are to be saved in a file.
LOAD/STORE FROM
For selecting the LOAD or STORE destination.
PRESET, USER1 or USER2 can be selected 
as the LOAD destination when LOAD has 
been selected; USER1 or USER2 can be 
selected as the STORE destination when 
STORE has been selected.
EXECUTE
LOAD or STORE is executed when NO is 
switched to YES and the ENTER operation is 
performed.
The NO setting is returned to the display after 
the data has been loaded or stored. 
						

							
- 45 (E) -

Setting of menu items
 TIME CODE menu
 ���TIME CODE �    RESET  HOUR              :00  MINUTE            :00  SECOND            :00  FRAME             :00  PRESET
TIME CODE is displayed only when FILM 
MENU has been set and either the 720/60p or 
720/59.94p format has been selected.
RESET
For resetting the time code to zero.
HOUR [00 to 23]
For setting the hour digits of the preset value 
for the time code.
MINUTE [00 to 59]
For setting the minute digits of the preset value 
for the time code.
SECOND [00 to 59]
For setting the second digits of the preset 
value for the time code.
FRAME [00, 10, 20, 30, 40, 50]
For setting the frame digits of the preset value 
for the time code.
PRESET
For presetting the time code. 
						

							
- 46 (E) -
ENGLISH

Setting of menu items
Menu list
Scene file items indicated by “”MAINTENANCE1.BLACK SHADINGDETECTIONCORRECT(DIG)
2.PEDESTAL, GAMMA M PEDESTAL*1
R PEDESTAL
B PEDESTALM GAMMAR GAMMAB GAMMA
M BLACK GAMMA
R BLACK GAMMA
B BLACK GAMMAGAMMA
BLACK GAMMAEFFECT DEPTHDRSCINE GAMMA SEL
BLACK STR.LVL
DYNAMIC LVL3.FLARER FLAREG FLAREB FLAREFLARE
4.KNEE, WHITE CLIPM KNEE POINTR KNEE POINTB KNEE POINTM KNEE SLOPER KNEE SLOPEB KNEE SLOPEA.KNEE POINT
A.KNEE LVL
M WHITE CLIP LVL
R WHITE CLIP LVL
B WHITE CLIP LVLKNEEWHITE CLIPHIGH COLOR5.R/B GAINR GAINB GAIN
ND FILTER*1
6.DETAIL DETAIL
TOTAL DTL LEVELH DTL LEVELCRISPLEVEL DEPENDENT
PEAK FREQUENCY
KNEE APERTURE
KNEE APE LVL 
						

							
- 47 (E) -

Setting of menu items
Scene file items indicated by “”MAINTENANCE6.DETAILSLIM DTL
DETAIL(+)
DETAIL(–)
DETAIL CLIP
DETAIL SOURCE
7.SKIN TONE DTL SKIN TONE DTLSKIN GETSKIN DTL CORINGY MAXY MINI CENTER
I WIDTH
Q WIDTHQ PHASE
8.GAIN,AUTO IRIS LOW GAIN
MID GAIN
HIGH GAINA.IRIS LEVEL
A.IRIS PEAK/AVE
A.IRIS WINDOWIRIS MODEIRIS GAIN
9.S.GAINMODE
TOTAL GAINGAINPIX MIXV MIXFRAME MIX
H DETAIL LEVELCRISPLEVEL DEPENDENT
PEAK FREQUENCYM GAMMAM PED OFFSETR PED OFFSETB PED OFFSET10.FRAME MODESCAN REVERSE
FRAME RATE RANGE
FRAME RATE
11.MATRIX MATRIX TABLE
MATRIX R-G
MATRIX R-B
MATRIX G-R
MATRIX G-B
MATRIX B-R
MATRIX B-G 
						

							
- 48 (E) -
ENGLISH

Setting of menu items
Scene file items indicated by “”MAINTENANCE12.COLOR CORRECTIONR   SAT/PHASE
Mg  SAT/PHASE
B   SAT/PHASE
Cy  SAT/PHASE
G  SAT/PHASE
Yl  SAT/PHASE
R_Mg SAT/PHASE
Mg_B SAT/PHASE
B_Cy SAT/PHASE
Cy_G SAT/PHASE
G_Yl SAT/PHASE
Yl_R SAT/PHASESETTING1.MODED5600KLIGHTINGGAIN SELECT*1CAMERA IDCAMERA ID POSI
MATRIX TABLECOLOR CORRECT
DIGITAL EXTENDERBAR SELECT
FORMAT
STATUSMENU ON ABBMENU SEL
FAN2.SHUTTERSHUTTER MODE*1SHUTTER SPEED
SYNCHRO SCAN3.GEN-LOCKGEN-LOCK IN
H.PHASE COARSEH.PHASE FINESDHD PHASE CRS(@SD GL)SDHD PHASE FINE(@HD GL)
4.PIX DEFECT(AUTO) AUTO DETECTION
5.PROTOCOL PROTOCOL
CAMERA IDID:
Depending on the controller which is connected, some of the controller’ s setting may take 
precedence even when a scene file has been loaded.
When the AK-HRP150G is being used, the AK-HRP150G panel statuses will tak e 
precedence for those items indicated by *1 on the menu list even when a scene file has 
been loaded. 
						

							
- 49 (E) -

3-9/16 (90)
6-5/16 (160)
15/32(12)
17/32(13.2)
AK-HC1500G
ULTI  FORMA
T
DIGI TAL  CAMERA  SYSTEM
4-5/8 (117)
Appearance
Unit: inch (mm)