Panasonic Kx Tda50 Tda100 Tda200 Tda600 Operating Manual

							Table 1 (Standard mode)Document Version  2010-11  Operating Manual511.3.14 Character Entry  
						

							Table 2 (Option mode)
 To enter "Ann"
Note
•To erase the character on the cursor, press CLEAR.
• To move the cursor to the left, press 
.
• To move the cursor to the right, press 
. When entering two or more characters that use the same
button consecutively (e.g.  "G" and  "I"), you must press this button or the FWD/DND button after entering
the first character.
• If the SELECT button is pressed, the characters for each button will be displayed in reverse order.
• To toggle between Table 1 and Table 2 when using a KX-T7600 series DPT, press the leftmost soft
button.
52Operating ManualDocument Version  2010-11  1.3.14 Character Entry A
2
nn
6(5 times)6(5 times)
FWD/DND
OR    
						

							1.3.15  Conference–Conference
– Leaving Three-party Conference
 Conference
You can add one or more parties to your conversation.
To establish a conference call
Document Version  2010-11  Operating Manual531.3.15 Conference Press CONF. Dial desired 
phone number.
Seize CO line before 
dialing outside phone number.
PT/PS
Talk with 
multiple parties.
During a conversation
desired 
phone no.
Talk to the 
new party.CONF
Press CONF
or TRANSFER.
OR
CONF
TRANSFERC.ToneC.Tone Dial desired
phone number.
desired 
phone no.
PT/PS
Talk with multiple parties.
Enter 3. Press TRANSFER.Talk to the 
new party.
3
During a conversation
Seize CO line before 
dialing outside phone number.
TRANSFER
Press TRANSFER.
TRANSFER
C.Tone  
						

							To establish a conference call when receiving a call from an outside party during a two-party
conversation
54Operating ManualDocument Version  2010-11  1.3.15 ConferenceDial desired
phone number.
desired 
phone no.
SLT
Talk with multiple parties.
Enter 3. Press Recall/
hookswitch.Talk to the 
new party.
3
During a conversation
Seize CO line before 
dialing outside phone number.
Press Recall/
hookswitch.
C.Tone PT/PS
Press HOLD.
During a conversation
HOLD
Press flashing CO,
PDN, or SDN.Talk to the
new party.Press CONF
or TRANSFER.
OR
CONF
TRANSFER
Talk to the
original party.
Press flashing CO, ICD Group,
PDN, SDN, or INTERCOM
corresponding to the
original party.
Press CONF, or press TRANSFER 
and then enter 3.Talk with
multiple parties.
OR
TRANSFER3
CONF
C.Tone
(CO)
(SDN)
(PDN)OR
OR
OR(CO)
INTERCOM
OR
(ICD Group)
(SDN)
(PDN)
OR
OR  
						

							To add four or more parties to a conference
To add another party on hold to a conference
To talk to two parties alternately in a three-party conversation
Document Version  2010-11  Operating Manual551.3.15 ConferencePress CONF. Press CONF. Dial desired 
phone number.
desired 
phone no.
Seize CO line before 
dialing outside phone number.
PT/PS
Talk.
During a conversation
Talk.
To continue
CONFCONF
C.Tone PT/PS
During a 3- to 7-party conference
Press flashing CO, ICD Group,
PDN, or SDN corresponding to
the party on hold.
Talk with
multiple parties.Press CONF.
CONF
Press CONF.
CONF
C.Tone
OR(CO)
OR
(ICD Group)
(SDN)
(PDN)
OR During a conversation
PT/PS
Press TRANSFER.
TRANSFER  
						

							To disconnect one party and then talk to the other in a three-party conversation
•* In this case, the FLASH/RECALL button on a proprietary telephone must be set to
Flash/Recall mode through system programming.
• During a three-party conversation, pressing the TRANSFER button or Recall/
hookswitch alternates between the two other parties in the conversation.
• You can have a conference with a maximum of eight parties (comprising intercom or
CO lines) simultaneously.
• During a conversation involving four or more parties, you cannot disconnect one party
and maintain the conversation with the other parties.Customizing Your Phone
• 3.1.4  Customizing the Buttons
Create or edit a Conference button.
 Leaving Three-party Conference
The person who originated a conference with two other parties can leave the conference, and allow the other
parties to continue the conversation.
56Operating ManualDocument Version  2010-11  1.3.15 ConferenceDuring a conversation
SLT
Press Recall/hookswitch. PT/PS
Press TRANSFER once
or twice to establish a 
conversation with the 
party to be disconnected.
TRANSFER
During a conversation
Press
FLASH/RECALL.
FLASH/
RECALL
Talk.
The other party will be put on hold.Press flashing CO, ICD Group,
PDN, SDN, or INTERCOM
corresponding to the original party.
INTERCOMOR
OR(CO)
OR
(ICD Group)
(SDN)
(PDN)
OR
*     
						

							To leave a conference involving at least one other extension
To leave a conference involving two outside parties
•To leave a conference call involving two outside parties and have the conversation continue,
your extension must be enabled to transfer calls to CO lines through COS programming.
1.3.16  Conference, Unattended
The person who originated a conference can leave the conference, and allow the other parties
to continue the conversation.Document Version  2010-11  Operating Manual571.3.16 Conference, UnattendedDuring a three-party conference
PT/SLT/PS
On-hook. During a three-party conference
PT/PS
Press TRANSFER.
TRANSFER
On-hook. During a three-party conference
SLT
Press Recall/hookswitch.On-hook.    
						

							To leave a conference
To return while others are talking
To complete a conversation
•Time limit
Both parties will hear an alarm tone before a specified timeout. The originating extension user
will hear an alarm tone before timeout. The call is disconnected when the timer runs out
unless the originating extension returns to the conference.Customizing Your Phone
• 3.1.4  Customizing the Buttons
Create or edit a Conference button.
1.3.17  Conference Group Call (KX-TDA50 only)
You can call multiple parties, assigned as members of a group (conference group), and make a voice
announcement. You can also establish a multiple party conversation with called parties. This conversation will
be heard by other called parties. Up to 8 parties (including the caller) can participate in the conversation.
58Operating ManualDocument Version  2010-11  1.3.17 Conference Group Call (KX-TDA50 only)PT/PS
Press CONF.
During a 3- to 7-party conference
CONF
On-hook. PT/PS
Press flashing green CO, ICD Group, PDN, SDN, or INTERCOM.
OR(CO)
INTERCOM
(SDN)(PDN)OROROR(ICD Group) During a conversation
On-hook.
PT/PS    
						

							To make/answer a conference group call•A caller using an SLT can originate a conference group call but cannot perform additional
operations, such as making a conversation with a specific party or ending a conversation with
a specific party.
• With some PS models, the call is not automatically answered. In this case, go off-hook to
answer a conference group call.
 For a caller
To make a conversation with a specific party
Document Version  2010-11  Operating Manual591.3.17 Conference Group Call (KX-TDA50 only)SLT
The telephone
rings.
Off-hook.
   Called Party
PT/PS
The telephone
rings.
The call is 
automatically 
answered.
 
   Called Party
Off-hook.Announce.
PT/SLT/PS
Dial conference
group number (1 digit). Enter    32.
Wait for an 
answer.conference
 group no.32C.Tone
   Caller   PT/PS
(DSS)
Press DSS.
During an announcement  
						

							To make a conversation with a party in the group’s preassigned order
To end a conversation with a specific party
•In this case, the FLASH/RECALL button must be set to Flash/Recall mode through system
programming.60Operating ManualDocument Version  2010-11  1.3.17 Conference Group Call (KX-TDA50 only)PT/PS
Press CONF.
During an announcement
CONF PT/PS
   To end a conversation with a specific party
During a conversation
(DSS)
Press DSS.
   To end a conversation with the party who 
   joined the conversation last
Press TRANSFER.
TRANSFER
   To disconnect the party who joined the  
   conversation last from the conference group call
Press FLASH/RECALL.
FLASH/
RECALL