NEC Neax 2400 Imx Wireless System Manual
Have a look at the manual NEC Neax 2400 Imx Wireless System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 1 ND-70290 (E) Pag e 1 4 Revision 3.0 GENERAL DESCRIPTION Table 1-5 List of Station Service Features ×: Available : Conditionally available –: Not available/Not used NAME OF SERVICE FEATURESStandalone Fusion REMARKS From PS To PS From PS To PS OFF HOOK ALARM–––– 8-PARTY CONFERENCE –––– C.F.-A-OUTSIDE×××× Note 1 C.F.-D-OUTSIDE×××× C.F.-B-OUTSIDE×××× C.F.-A×××× Note 6 C.F.-A CANCEL BY A ROUTINE DIAGNOSIS–––– CALL TRANSFER - ALL CALLS×××× Note 2 EMERGENCY CALL –––– DAY/NIGHT CLASS OF SERVICE–––– CALL WAITING×××× Note 3 CALL PICK UP - GROUP ××––Not available to do “Pick Up” from another node CALL HOLD –––– THREE-WAY CALLING×××× TIMED REMINDER –––– CALL PICK UP - DIRECT ×–––Not available to do “Pick Up” from another node STEP CALL×××× Note 4 SPLIT C.F. –––– HOT LINE××–– PERIODICAL INDICATION TONE×––– AUTOMATIC CALL BACK CANCEL–––– CLASS OF SERVICE - INDIVIDUAL×××× STATION-TO-STATION CALLING×××× STATION-TO-STATION CALL RESTRICTION×××× EXECUTIVE RIGHT OF WAY –––– STATION HUNTING–––– CALL BACK ––––
ND-70290 (E) CHAPTER 1 Page 15 Revision 3.0 GENERAL DESCRIPTION Note 1: C.F.-D-Outside is not applicable by way of CALL TRANSFER-ALL CALLS. Note 2:Recall service can be activated to the transferred station when the PS, with C.F.-PS INCOMING CALL INCOMPLETE in service, moves Out of Zone, after placing a call on hold. Note 3:Call Waiting 1) This service is valid in the two party call when a call is terminated – from station-to-station, to PS, to Central Office line, or to Tie line call – but invalid when other services using switch hook flash are executed to the PS or when the PS is connected to the Attendant Console. 2) To set CALL WAITING, it is necessary that the Service Restriction Class data (ASFC) be assigned in the office data assignment. Call Waiting service is provided according to each service feature restriction class. 3) There is no limitation of the number of CALL WAITING services such as the number of simultaneous settings/the number of occurrence of answers. 4) This service cannot be used if the Central Office line (DIRECT IN TERMINATION) or a call via the Attendant Console. Note 4:Tie line STEP CALL is not available from PS. Note 5:PS can activate this feature only for Attendant Console. Note 6:In the Fusion network, the destination of call forwarding from PS must have a Telephone Number. FLEXIBLE NUMBERING OF STATION×××× AUTOMATIC HOWLER TONE SENDING–––– STATION 5 DB PAD×××× BOSS/SECRETARY –––– C.F.-D×××× Note 6 PUSH-BUTTON CALLING –––– PRIORITY CALL×–×– Note 5 LINE LOCK-OUT–––– RECALL×–×– C.F.-B×××× Note 6 PRIVACY –––– ONE DIGIT HOOKING–––– Table 1-5 List of Station Service Features (Continued) ×: Available : Conditionally available –: Not available/Not used NAME OF SERVICE FEATURESStandalone Fusion REMARKS From PS To PS From PS To PS
CHAPTER 1 ND-70290 (E) Pag e 1 6 Revision 3.0 GENERAL DESCRIPTION Table 1-6 List of Other Service Features ×: Available : Conditionally available –: Not available/Not used NAME OF SERVICE FEATURESStandalone Fusion REMARKS From PS To PS From PS To PS AUTHORIZATION CODE –––– ACCOUNT CODE –––– C.F.-INTERCEPT/ ANNOUNCEMENT×––– CALL PARK –––– DISTRIBUTION ACCESS UNIT (DAU)–––– DSS CONSOLE –––– ANNOUNCEMENT SERVICE×––– OG CALL RESTRICTION ANNOUNCEMENT×––– PAGING –––– PAGING TRANSFER –––– RADIO PAGING –––– UNIFORM CALL DISTRIBUTION (UCD)–––– UCD-DELAY ANNOUNCEMENT–––– LAST NUMBER CALL ––––Substituted for the LAST NUMBER CALL function of PS
ND-70290 (E) CHAPTER 1 Page 17 Revision 3.0 GENERAL DESCRIPTION Table 1-7 List of Attendant Console Service Features ×: Available : Conditionally available –: Not available/Not used NAME OF SERVICE FEATURESStandalone Fusion REMARKS From PS To PS From PS To PS AUTOMATIC RECALL –×–× ATTENDANT LOOP RELEASE – – – – CALL TRANSFER-ATTENDANT –×–× Note 1 SUPERVISORY CALL –×–× DIGITAL DISPLAY-TRUNK – – – – CALL PROCESSING INDICATION×××× SERIAL CALL –––– CALL WAITING LAMP DISPLAY×–×– ATTENDANT CAMP-ON – – – – NON-DELAY OPERATION×–×– Note 3 INTER-POSITION TRANSFER – – – – DELAY OPERATION×–×– Note 3 DIAL MONITOR –×–× SPLIT CALL FORWARDING – – – – TRUNK GROUP BUSY LAMP – – – – SPEED CALLING-STATION/ GROUP–––– SPEED CALLING-SYSTEM – – – – INDIVIDUAL ATTENDANT AC CES S×–×– ATTENDANT OVERRIDE – – – – STEP CALL –×–× ATTENDANT MONITOR SERVICE–––– ATTENDANT NIGHT TRANSFER×––– BUSY VERIFICATION – – – – I NDIVIDUAL TRUNK AC CES S – – – – DIAL ACCESS TO ATTENDANT×××× Note 2, Note 3 DIGITAL DISPLAY-STATION××××Note 3 BUSY LAMP FIELD-FLEXIBLE××–– RECALL×–×–
CHAPTER 1 ND-70290 (E) Pag e 1 8 Revision 3.0 GENERAL DESCRIPTION Note 1: Upon receiving an incoming call, the Attendant Console transfers the call to a PS, then it ends up with the PS connected to the outside. If, in this situation, the PS user moves to a place Out of Zone, the caller from the outside line will hear BT. Note 2:While the Attendant Console is calling a PS, the services associated with Out of Zone such as C.F.-PS INCOMING INCOMPLETE, AUTOMATIC ANNOUNCEMENT-PS OUT OF ZONE and AUTOMATIC ANNOUNCEMENT-DISCONNECTED PS OUT OF ZONE are not available. When an Attendant calls a PS, the individual attendant number can be displayed on the LCD of the PS. However “OPR” cannot be displayed on the LCD of the PS. Note 3:This service Feature has the limitation of Fusion Link Network. Refer to the Fusion Network System Manual/Feature Programming Manual.
ND-70290 (E) CHAPTER 1 Page 19 Revision 3.0 GENERAL DESCRIPTION Note 1: This service feature has the limitation for the Fusion Link Network. Refer to the Fusion Network System Manual. Table 1-8 List of Network Service Features ×: Available : Conditionally available –: Not available/Not used NAME OF SERVICE FEATURESStandalone Fusion REMARKS From PSTo PS From PS To PS AUTOMATIC CIRCUIT ASSURANCE×–×– CENTREX COMPATIBILITY –×–× DELUXE TRAVEL CLASS MARK – – – – LCR - AUTOMATIC OVERFLOW×–×– LCR-3/6-DIGIT×–×– Note 1 TANDEM CONNECTION – – – – TANDEM TRUNK QUEUING – – – – TANDEM PAD CONTROL – – – – TIE LINE ACCESS×× × × OUTGOING TRUNK BUSY - ANNOUNCEMENT×–– – HOT LINE - OUTSIDE×–– – DIGITAL TRUNK INTERFACE×× × × LCR - SPECIAL LINE WARNING×–– – UNIFORM NUMBERING PLAN×× × × LCR - TIME OF DAY ROUTING – – – – LCR - CLOCKED MANUAL OVERR IDE–– – – ATTENDANT MANUAL OVERR IDE–– – – Table 1-9 List of Operation/Maintenance Service Features ×: Available : Conditionally available –: Not available/Not used NAME OF SERVICE FEATURESStandalone Fusion REMARKS From PS To PS From PS To PS SERVICE PEG COUNT×––– TRAFFIC MEASUREMENT××–– INDIVIDUAL TRUNK ACCESS – – – – LINE LOAD CONTROL – – – –
CHAPTER 1 ND-70290 (E) Pag e 2 0 Revision 3.0 Note 1:Automatic Announcement - PS Out of Zone/C.F. PS Incoming Incomplete may not be available. It depends on Public ISDN Network. Note 2:The ISDN terminal cannot transfer the call to a PS or provide the 3-party conference feature including a PS. Note 3:A PS can transfer the call to ISDN terminal and provide the 3-party conference feature including the ISDN terminal. Table 1-10 List of ISDN Service Features ×: Available : Conditionally available –: Not available/Not used NAME OF SERVICE FEATURESStandalone Fusion REMARKS From PS To PSFrom PSTo P S DIRECT INWARD DIALING –×–×Note 1 SUB ADDRESS - PRESENT×––– SUB ADDRESS - ADDRESSING –×–× Note 1 CALLING PARTY NUMBER - PRESENT×––– CALLING PARTY NUMBER - DISPLAY–×–×
ND-70290 (E) CHAPTER 1 Page 21 Revision 3.0 GENERAL DESCRIPTION Table 1-11 List of CCIS Features ×: Available : Conditionally available –: Not available/Not used NAME OF SERVICE FEATURESORIGINATED FROM PSTERMINATED TO PSREMARKS Attendant Controlled Conference - CCIS–× Automatic Recall - CCIS×– Brokerage Hotline - CCIS –× Call Forwarding - All Calls - CCIS×× Call Forwarding - Busy Line - CCIS×× Call Forwarding - Don’t Answer - CCIS×× Call Transfer - All Calls - CCIS×× Calling/Called Number Display - CCIS×× Consultation Hold - All Calls - CCIS×× Deluxe Traveling Class Mark - CCIS×× Dial Access to Attendant - CCIS×– Digital Display - Station - CCIS×– Direct In Termination - CCIS –× Distinctive Ringing - CCIS –× Do not Disturb - CCIS –× Dial Number Display - Recall - CCIS×× Flexible Numbering of Station - CCIS×– House Phone - CCIS –× Hot Line - CCIS×× Incoming Call Identification - CCIS×– Individual Attendant Access - CCIS×– LDN Night Connection - CCIS –× Miscellaneous Trunk Access - CCIS×– Miscellaneous Trunk Restriction - CCIS×– Multiple Call Forwarding - All Calls - CCIS×× Multiple Call Forwarding - Busy Line - CCIS××
CHAPTER 1 ND-70290 (E) Pag e 2 2 Revision 3.0 GENERAL DESCRIPTION Multiple Call Forwarding - Don’t Answer - CCIS×× Night Connection - Fixed - CCIS –× Night Connection - Flexible - CCIS –× Off-Hook Queuing - CCIS×– Single Digit Station Calling - CCIS×– Station Controlled Conference - CCIS –× Step Call - CCIS –× Supervisory Call - CCIS –× Table 1-11 List of CCIS Features (Continued) ×: Available : Conditionally available –: Not available/Not used NAME OF SERVICE FEATURESORIGINATED FROM PSTERMINATED TO PSREMARKS
ND-70290 (E) CHAPTER 2 Page 23 Revision 3.0 CHAPTER 2 INSTALLATION DESIGN This chapter describes the installation for the Built-in PCS system. 1. INSTALLATION This section explains how to connect the Built-in PCS system and its related equipment. Refer to the “Installation Manual” to learn the installation method of the PBX and its related equipment that is included here. ZT (Zone Transceiver) : Connection with S interface ZT (Zone Transceiver) : Connection with U interface 1.1 ZT (ZONE TRANSCEIVER) AND ITS CONNECTION WITH S INTERFACE 1. General This part explains how to connect the Zone Transceiver (ZT). 2. Circuit Card NAME OF CIRCUIT CARD 2W/4W REMARKS PA - 4 C S I C 4 W PA - 4 C S I E 4 W