NEC Neax 2400 Imx Wireless System Manual

							CHAPTER 4 ND-70290 (E)
Pag e 9 4
Revision 3.0
OFFICE DATA ASSIGNMENT
1.2 ZT OFFICE DATA ASSIGNMENT
 CSINT circuit card can accommodate a maximum of four ZTs.
 Every ZT has three speech channels in the form of 3B+D.
 Each ZT is provided with PHS Community, Calling Area, Group and ZT number, given a maximum
capacity to have 32 areas while each area has eight groups. One group can house 32 ZTs.
PHS Community: PHS community having the same SYS-ID is identified by PHS community Number
(PCN).
Calling Area:  When a dedicated PS is called, the system is designed to search first for a PS in its
registered area and if the PS has moved Out of Zone, the PS Location Registration is
automatically performed in no time just when the dedicated PS has moved to another
place.
Group:  Dividing into groups is not presently used.
NEAX2400 IMX
CS-INT
CS-INTCalling Area 1
PSPS
PS ZT
Calling Area 2
PSPS
PS ZT
Calling Area 1
PSPS
PS ZT
PCN=1
PCN=2 
						

							ND-70290 (E) CHAPTER 4
Page 95
Revision 3.0
OFFICE DATA ASSIGNMENT
1. ZT Initial Start-Up
1) ASYD (Assignment of System Data)
CCIS ISDN function simultaneously becomes valid when the ZT operation is attempted to be in 
service, as the ZT is regarded as a terminal of the ISDN.
SYS1
SI186 
Note 1
b6=1 (CCIS function in service)
SI220 
Note 1
b6=0 (ISDN function in service)
Note 1:ISDN and CCIS data become valid, but where the ISDN and CCIS functions are not to be
used, optional software concerning ISDN and CCIS is not necessary.
2) Call LVP Server system
3) APCNL (Assignment of PHS Community Number Data for Local Data Memory)
FUNC=1
PHS Community Number (PCN) Entry
TN ... PCN
Note:Do not assign Func=2.
4) ALVPL (Assignment of LVP Code for Local Data Memory)
KIND=2
Assign the SYS-ID Code
 
5) ALVPL (Assignment of LVP Code for Local Data Memory)
KIND=1
Assign the LVP Code
6) ACSEL (Assignment of Expansion CS/ZT System Data for Local Data Memory)
 PHS Community Number : 1~1024
 Network Number : Only for Roaming Feature
 Additional Area Number : Only for Roaming Feature
 Country Number : 31A (USA) fixed
 Number of PHS-Manager Code : 0 fixed
7) ACSDL (Assignment of CS/ZT Data for Local Data Memory)
This command is used to assign the ZT related data including the PHS Community Number, 
Calling Area No., Group No., ZT No., ZT LENS, ZT KIND.
When this data assignment is finished, 3B+D channels of the CSINT circuit card start-up.
 PHS Community Number : 1~1024
 Calling Area Number : 1-32
 Group Number : 1-8
 ZT Number : 1-32
 KIND : ZT Kind : Number : 4 (fixed)
 TN : Tenant Number
 LENS : ZT Equipment Number
 START
 END 
						

							CHAPTER 4 ND-70290 (E)
Pag e 9 6
Revision 3.0
OFFICE DATA ASSIGNMENT
2.  Add Operating ZT
1) Installation of Additional ZT
2) Call LVP Server system
3) ALVPL (Assignment of LVP Code for Local Data Memory)
KIND=1
Assign the LVP Code
ACSDL (Assignment of CS/ZT Data for Local Data Memory)
This command is used to assign the ZT related data including the PHS Community Number, 
Calling Area No., Group No., ZT No., ZT LENS, ZT KIND.
When this data assignment is finished, 3B+D channels of the CSINT circuit card start-up.
 PHS Community Number : 1~1024
 Calling Area Number : 1-32
 Group Number : 1-8
 ZT Number : 1-32
 TN : Tenant Number
 LENS : ZT Equipment Number
 START
 END 
						

							ND-70290 (E) CHAPTER 4
Page 97
Revision 3.0
OFFICE DATA ASSIGNMENT
3. ZT Deletion Procedure
1) MBCSL (MAKE BUSY of CS/ZT for Local Data Memory)
2) ACSDL (Assignment of CS/ZT Data for Local Data Memory)
Delete the ZT Data.
 START
 END 
						

							CHAPTER 4 ND-70290 (E)
Pag e 9 8
Revision 3.0
OFFICE DATA ASSIGNMENT
1.3 PS OFFICE DATA ASSIGNMENT
Below are explanations about assigning office data by which the PS can be in operation in the Built-in PCS
system.
1. Initial Start-UP of the PS
2. Addition of the PS
1) APSD (Assignment of the PS Operation Data for DM)
This command assigns the PS operation data including its tenant No., station No., Service Feature 
Restriction Class (SFC) and the Route Restriction Class (RSC) in consideration of the numbering 
plan/restriction data.
 TN : Tenant
 PS STN : PS Station Number
 KIND : PS KIND :6 (My Line) or 7 (Sub Line)
 RSC : Route Restriction Class
 SFC : Service Feature Restriction Class
 PS-ID : Max. 9 [DEC]
 PSNO : PS KIND : 2 (13 digits or less [BCD]) fixed
   NO. : Assign the same number as the PS NO. according to PS KIND.
 NWN : Network Number  : Only for Roaming Feature
 ADERA : Additional Area Number  : Only for Roaming Feature
 CTRN : Country Number  : 794 (USA) fixed
 Sub-Sysid : Number of Sub-Sysid  : Not used
3) ALGSL (Assignment of Telephone Number Data for Local Data Memory)
Refer to “Office Data Specification Manual”.
4) APDLL (Download of PS Operation Data for Local Data Memory)
This command loads the PS operation data to the PS.
 UGN
 PS Telephone Number : Max. 16 Digits
TYPE=2
 PS No : Max. 13 Digits
 END
 START 
						

							ND-70290 (E) CHAPTER 4
Page 99
Revision 3.0
OFFICE DATA ASSIGNMENT
3. Deletion of the PS data
1) ALGSL (Assignment of Telephone Number Data for Local Data Memory)
Delete the related Telephone Number and LENS.
2) APSD (Assignment of the PS Operation Data for DM)
Using this command, delete the PS data to be cleared such as tenant No., station No., SFC and 
RSC.
 END
 START 
						

							CHAPTER 4 ND-70290 (E)
Pag e 1 00
Revision 3.0
OFFICE DATA ASSIGNMENT
2. BASIC OFFICE DATA ASSIGNMENT (FUSION)
2.1 SYSTEM DATA
The following data assignment is necessary for activating the PCS service.
Note:For more detail about the data above, refer to the ASYD command in Chapter 5. ASYD-SYS1
SI30=06
SI420
b0: Access code using the Pre-Set dialing
0/1: Out/In service (Normal Setting)
SI421
SI422
SI423:  AUTOMATIC ANNOUNCEMENT-PS OUT OF ZONE disconnection timer
: No tone connection timer to the called party during the handover
:  ZT start-up Guard Timer when system initialization is in progress (The timer is designed to 
have the PS location registration required after being placed Out of Zone): Reserved for future 
use.
ASYDL-SYS1
SI512=01 ~ FD : FPC
SI513=01 LDM is used
SI514=01 NDM is used
SI800
b3: PCN for Tenant
0/1: a Tenant basis/Common 
						

							ND-70290 (E) CHAPTER 4
Page 101
Revision 3.0
OFFICE DATA ASSIGNMENT
2.2 ZT OFFICE DATA ASSIGNMENT
 CSINT circuit card can accommodate a maximum of four ZTs.
 Every ZT has three speech channels in the form of 3B+D.
 Each ZT is provided with PHS Community, Calling Area, Group and ZT number, given a maximum
capacity to have 32 areas while each area has eight groups. One group can house 32 ZTs.
PHS Community: PHS community having the same SYS-ID is identified by PHS community Number
(PCN).
Calling Area:  When a dedicated PS is called, the system is designed to search first for a PS in its
registered area and if the PS has moved Out of Zone, the PS Location Registration is
automatically performed in no time just when the dedicated PS has moved to another
place.
One area cannot exist in multiple node.
Group:  Dividing into groups is not presently used.
NEAX2400 IMX
CS-INT
CS-INTCalling Area 1
PSPS
PS ZT
Calling Area 2
PSPS
PS ZT
Calling Area 1
PSPS
PS ZT PCN=1
PCN=2
NEAX2400 IMX
CS-INT
CS-INTCalling Area 2
PSPS
PS ZT
Calling Area 3
PSPS
PS ZT
Calling Area 3
PSPS
PS ZT PCN=2
PCN=1
FCCS 
						

							CHAPTER 4 ND-70290 (E)
Pag e 1 02
Revision 3.0
OFFICE DATA ASSIGNMENT
1. ZT Initial Start-Up
1) ASYD (Assignment of System Data)
CCIS ISDN function simultaneously becomes valid when the ZT operation is attempted to be in 
service, as the ZT is regarded as a terminal of the ISDN.
SYS1
SI186 
Note 1
b6=1 (CCIS function in service)
SI220 
Note 1
b6=0 (ISDN function in service)
Note 1:ISDN and CCIS data become valid, but where the ISDN and CCIS functions are not to be
used, optional software concerning ISDN and CCIS is not necessary.
2)Call LVP Server system
3) APCNN (Assignment of PHS Community Number Data for Network Data Memory)
FUNC=1   PHS Community Number (PCN) Entry.
FPC, TN, PCN
Note:Do not assign Func=2.
4) ALVPN (Assignment of LVP Code for Network Data Memory)
KIND=2
Assign the SYS-ID Code
5) ALVPL (Assignment of LVP Code for Local Data Memory)
KIND=1
Assign the LVP Code (for each Node)
Note:LVP Code is assigned to the nodes which have ZTs.
6) ACSEN (Assignment of Expansion CS/ZT System Data for Network Data Memory)
 PHS Community Number : 1~1024
 Network Number : Only for Roaming Feature
 Additional Area Number : Only for Roaming Feature
 Country Number : 31A (USA) fixed
 Number of PHS-Manager Code : 0 fixed
 START
A 
						

							ND-70290 (E) CHAPTER 4
Page 103
Revision 3.0
OFFICE DATA ASSIGNMENT
2. Procedure to Add Operating ZT7) ACSDN (Assignment of CS/ZT Data for Network Data Memory)
This command is used to assign the ZT related data including the PHS Community No., Fusion 
Point Code, Calling Area No., Group No., ZT No., ZT LENS, ZT KIND.
When this data assignment is finished, 3B+D channels of the CSINT circuit card start-up.
 PHS Community Number : 1~1024
 FPC : Fusion Point Code
 Calling Area Number : 1-32
 Group Number : 1-8
 ZT Number : 1-32
 KIND : ZT kind : 4 (fixed)
TN : Tenant Number
 LENS : ZT Equipment Number
Note:If NDM was not copied to the Local Nodes(s) after the last initialization, please broadcast it
using CBCN command.
1) Installation of Additional ZT
2)Call LVP Server system
3) ALVPL (Assignment of LVP Code for Local Data Memory)
KIND=1
Assign the LVP Code
4) ACSDN (Assignment of CS/ZT Data for Network Data Memory)
This command is used to assign the ZT related data including the PHS Community No., Fusion 
Point Code, Calling Area No., Group No., ZT No., ZT LENS, ZT KIND.
When this data assignment is finished, 3B+D channels of the CSINT circuit card start-up.
 PHS Community Number : 1~1024
 FPC : Fusion Point Code
 Calling Area Number : 1-32
 Group Number : 1-8
 ZT Number : 1-32
 TN : Tenant Number
 LENS : ZT Equipment Number
 END
A
 START
 END