NEC Neax 2400 Imx Wireless System Manual
Have a look at the manual NEC Neax 2400 Imx Wireless System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 5 ND-70290 (E) Pag e 2 64 Revision 3.0 ALGSN ALGSN : Assignment of Telephone Number Data for Network Data Memory 1. GENERAL This command is used to assign the related data of the Telephone Number (TELN) corresponding to the physical station. The data assigned by this command is written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN). List Up Command : LLGSN 2. PRECAUTIONS 1. The ALGSN command is used to assign the Telephone Number (TELN) for a Network Control Node (NCN). 2. TYPE parameter allows user to choose the programming method of physical station. TYPE = 1 (LENS) : Telephone number is to be given to the LENS TYPE = 2 (STN) : Telephone number is to be given to the station 3. The system data assignment ( ASYDN, SYS 1, INDEX 514, bit1=1) is needed to provide the Network Data Memory (NDM). 4. Prior to assigning this command, the Telephone Number should be entered by the ALGNN command. 5. When the parameter “TYPE” is 1 (LENS is used to specify the physical station number), the assignment of the Fusion Point Code (FPC) entered by the AFMU command is required. 6. When deleting the telephone number, the user must first delete the data which is concerned with Group Calling Conference. 7. For more details, see the “Fusion Network System Manual”.
ND-70290 (E) CHAPTER 5 Page 265 Revision 3.0 ALGSN 3. DATA ENTRY INSTRUCTIONS When assigning TYPE = 1 (LENS is used to specify the Telephone number) When assigning TYPE = 2 (STN is used to specify the Telephone number) TYPE 1/2USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) MAX. 16 DIGITSLINE EQUIPMENT NUMBER (LENS)FUSION POINT CODE (FPC) 1-253 115 11 4 0 0 0 00 0 0 0 1 1 TYPE 1 = LENS is used to specify the Telephone number 2= STN is used to specify the Telephone number LENS LENS of the physical station UGN 1 = User Group Number 1 (Fixed) TELN Telephone number assigned by the ALGNN command. FPC Fusion Point Code (FPC) of the designated LENS. FPC is assigned by the AFMU command. TN Tenant number of the physical station TYPE 1/2USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) MAX. 16 DIGITSTENANT NUMBER (TN)STATION NUMBER (STN) 21 11 21400 002 5 645 TYPE 1 = LENS is used to specify the Telephone number 2= STN is used to specify the Telephone numberSTN Station number of the physical station UGN 1 = User Group Number 1 (Fixed) TELN Telephone number assigned by the ALGNN command.
CHAPTER 5 ND-70290 (E) Pag e 2 66 Revision 3.0 ALGSN 4. DATA SHEET LENS is used to specify the Telephone number (TYPE = 1) TYPEUSER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) MAX. 16 DIGITSLINE EQUIPMENT NUMBER (LENS)FUSION POINT CODE (FPC) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11
ND-70290 (E) CHAPTER 5 Page 267 Revision 3.0 ALGSN STN is used to specify the Telephone number (TYPE = 2) TYPEUSER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) MAX. 16 DIGITSTENANT NUMBER (TN)STATION NUMBER(STN)REMARKS 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21
CHAPTER 5 ND-70290 (E) Pag e 2 68 Revision 3.0 ALRTN ALRTN : Assignment of Logical Route for Network Data Memory 1. GENERAL This command is used to allocate the Logical Route Number which is the unique number of the external trunk route in the Fusion network. List Up Command : LLRTN 2. PRECAUTIONS 1. Logical Route Number allocation is required for the Fusion network only. 2. For more detailed information, see the “Fusion System Manual”. 3. DATA ENTRY INSTRUCTIONS NUMBER (LGRT) LOGICAL ROUTE FUSION POINT CODE (FPC) 1-253EXTERNAL ROUTE NUMBER (RT) 1-255REMARKS1-899 Assign all external routes including dummy routes in the Fusion network. RT FPCAssign FPC of the each node to which the external trunk route belongs. LGRTLGRT is the unique number allocated to each external trunk route in the Fusion network.
ND-70290 (E) CHAPTER 5 Page 269 Revision 3.0 ALRTN 4. DATA SHEET LOGICAL ROUTE NUMBER (LGRT) 1-899FUSION POINT CODE (FPC) 1-253EXTERNAL ROUTE NUMBER (RT) 1-255REMARKS
CHAPTER 5 ND-70290 (E) Pag e 2 70 Revision 3.0 ANSDL ANSDL : Assignment of Number Sharing Data for Local Data Memory 1. GENERAL This command is used to assign and delete Main Station and Sub Station data for Number Sharing service. 2. PRECAUTIONS 1. This command is available for Series 7300 or later software. 2. This command is used for the Local Node. 3. For detailed information on Number Sharing service, see “Number Sharing” in Chapter 4. 3. DATA ENTRY INSTRUCTIONS M-UGN : Main User Group Number S-UGN : Sub User Group Number M-TELN : Main Telephone Number (Maximum 16 digits) S-TELN : Sub Telephone Number (Maximum 16 digits) OD : Output External Equipment Note 0 : Only Main Telephone Number is used for SMDR, MCI and VPS Mail Box Number. 1 : Both Main Telephone Number and Sub Telephone Number are used for SMDR, MCI and VPS Mail Box Number. Note:When this parameter is set to “0”, the mail box for the Sub Station must be deleted. MW : Message Waiting Control 0 : Message Waiting Control for Main and Sub Telephone Numbers 1 : Message Waiting Control for Main Telephone Number Only INDEX : Telephone Equipment Number (1-65535)
ND-70290 (E) CHAPTER 5 Page 271 Revision 3.0 ANSDL 4. DATA SHEET Number sharing Data Assignment Sheet (1/2) MAIN USER GROUP NUMBER (M-UGN)SUB USER GROUP NUMBER (S-UGN)MAIN TELEPHONE NUMBER (M-TELN) MAX. 16 DIGITSSUB TELEPHONE NUMBER (S-TELN) MAX. 16 DIGITS
CHAPTER 5 ND-70290 (E) Pag e 2 72 Revision 3.0 ANSDL Number sharing Data Assignment Sheet (2/2) OUTPUT EXTERNAL EQUIPMENT (OD) 0/1MESSAGE WAITING CONTROL (MW) 0/1TELEPHONE EQUIPMENT NUMBER (INDEX) 1-65535REMARKS
ND-70290 (E) CHAPTER 5 Page 273 Revision 3.0 ANSDN ANSDN : Assignment of Number Sharing Data for Network Data Memory 1. GENERAL This command is used to assign and delete Main Station and Sub Station data for Number Sharing service. 2. PRECAUTIONS 1. This command is available for Series 7300 or later software. 2. This command is used for the Network Control Node. 3. For detailed information on Number Sharing service, see “Number Sharing” in Chapter 4. 3. DATA ENTRY INSTRUCTIONS M-UGN : Main User Group Number S-UGN : Sub User Group Number M-TELN : Main Telephone Number (Maximum 16 digits) S-TELN : Sub Telephone Number (Maximum 16 digits) OD : Output External Equipment Note 0 : Only Main Telephone Number is used for SMDR, MCI and VPS Mail Box Number. 1 : Both Main Telephone Number and Sub Telephone Number are used for SMDR, MCI and VPS Mail Box Number. Note:When this parameter is set to “0”, the mail box for the Sub Station must be deleted. MW : Message Waiting Control 0 : Message Waiting Control for Main and Sub Telephone Numbers 1 : Message Waiting Control for Main Telephone Number Only INDEX : Telephone Equipment Number (1-65535)