NEC Neax 2400 Imx Wireless System Manual

							CHAPTER 5 ND-70290 (E)
Pag e 2 54
Revision 3.0
AAED
3. DATA ENTRY INSTRUCTIONS
0 = Common 1 = Japanese
2 = English     3 = German
4 = French      5 = Spanish
6 = Chinese     7 = Russian
8-15 = Spare 
Note: LANG is available for the
Hotel application.
LANG
Enter EQP as the service feature provided by DAT. 
0 ~ 59     :
60       : ANNOUNCEMENT-PS-OUT OF ZONE
61      : AUTOMATIC ANNOUNCEMENT-PS-OUT OF ZONE CALL
62 ~ 127 :EQP
0 = Single connection
1 = Multiple connection M
TK parameter appears
if M=1 is entered. TK
0 = 30 seconds, and then disconnects
1 = The connection is held until the calling party released 
C
TENANT
NUMBER
( TN )ANNOUNCEMENT
EQUIPMENT
NUMBER
( EQP ) 0 - 127 KIND OF
LANGUAGE
( LANG )
0 - 15DURATION OF
CONNECTION
( C )
0 / 1SENDING
RBT
( R )
0 / 1ANSWER
SIGNAL
SENDING
( A )
0 / 1MULTIPLE
CONNECTION
( M )
0 / 1ROUTE
NUMBER
( RT )TRUNK
NUMBER
( TK )
Enter DAT route number assigned
by the ATRK command. RT
0 = Send RBT
1 = Do not send RBT 
R
0 = Answer Signal is not sent
1 = Answer Signal is sent 
A
Note:  Regarding this data, refer to the Office Data Specification.  Note   Note 
						

							ND-70290 (E) CHAPTER 5
Page 255
Revision 3.0
AAED
4. DATA SHEET
Note:Parameter LANG is available for the Hotel System.
TENANT 
NUMBER
(TN)ANNOUNCE
-MENT
EQUIPMENT
NUMBER
(EQP) 0-127KIND OFLANGUAGE
(LANG)
0-15
Note 
DURATION 
OF 
CONNEC-
TION (C)
0/1SENDING
RBT (R)
0/1ANSWER
SIGNAL
SENDING
(A) 0/1MULTIPLE
CONNEC-
TION
(M)0/1ROUTE
NUMBER
(RT)TRUNK
NUMBER
(TK)REMARKS 
						

							CHAPTER 5 ND-70290 (E)
Pag e 2 56
Revision 3.0
ALGNL
ALGNL  : Assignment of Telephone Number Data for Local Data Memory
1. GENERAL
This command is used to assign the Telephone Number (TELN) available in the self (local) node only. 
List Up Command : LLGNL
2. PRECAUTIONS
1. This Telephone Number is available in the self (local) node only. If the Telephone Number for the  Fusion
network is required, use the ALGNN command.
2. The Telephone Number (TELN) assigned by this command is used in conjunction with the physical station
specified by the ALGSL command.
3. The system data assignment (ASYDL, SYS1, INDEX513 Data 01hex) is needed to provide the Local Data
Memory (LDM).
4. Before assigning this command, ANPDL / ASPAL commands are required for the numbering plan of the
Telephone.
5. Unique Telephone Number (TELN) should be given within a User Group Number (UGN).
3. DATA ENTRY INSTRUCTIONS
TELEPHONE NUMBER (TELN)
MAX. 16 DIGITS REMARKS USER GROUP NUMBER
(UGN)
TELN
Assign Telephone Number (Unique TELN 
should be given within a UGN)
UGN
 1 = User Group Number 1 (Fixed)
1
1
1
1 
						

							ND-70290 (E) CHAPTER 5
Page 257
Revision 3.0
ALGNL
4. DATA SHEET
USER GROUP NUMBER
(UGN)TELEPHONE NUMBER (TELN)
MAX. 16 DIGITSREMARKS 
						

							CHAPTER 5 ND-70290 (E)
Pag e 2 58
Revision 3.0
ALGNN
ALGNN  : Assignment of Telephone Number Data for Network Data Memory
1. GENERAL
This command is used to assign the Telephone Number (TELN). The data assigned by this command is written
in Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node
(LN). 
List Up Command : LLGNN
2. PRECAUTIONS
1. The Telephone Number (TELN) assigned by this command is used in conjunction with the physical station
specified by the ALGSN command.
2. The applicable tenant number (TN) range is designated by the ASYDN command, SYS 1, INDEX 8. If the
numbering plan is common for all tenants (ASYDN, SYS1, INDEX 800, bit0=1), assign TN parameter as
“1” for all tenants.
3. The system data assignment (ASYDN, SYS 1, INDEX 514, bit1=1) is needed to provide the Network Data
Memory (NDM).
4. Before assigning this command, ANPDN / ASPAN commands are required for the numbering plan of the
Telephone Number (TELN). 
5. Unique Telephone Number (TELN) should be given within a User Group Number (UGN).
3. DATA ENTRY INSTRUCTIONS
USER GROUP
NUMBER (UGN)TELEPHONE NUMBER (TELN)
MAX. 16 DIGITSREMARKS
1 40000
1 40001
1 40002
UGN
1 = User Group Number 1 (Fixed)
TELN
Assign Telephone Number (Unique
TELN should be given within a UGN) 
						

							ND-70290 (E) CHAPTER 5
Page 259
Revision 3.0
ALGNN
4. DATA SHEET
USER GROUP
NUMBER (UGN)TELEPHONE NUMBER (TELN)
MAX. 16 DIGITSREMARKS
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 
						

							CHAPTER 5 ND-70290 (E)
Pag e 2 60
Revision 3.0
ALGSL
ALGSL  : Assignment of Telephone Number Data for Local Data Memory
1. GENERAL
This command is used to assign the data pertaining to the relationship between the Telephone Number (TELN)
and physical station. 
List Up Command : LLGSL
2. PRECAUTIONS
1. This Telephone Number can be used in the self (local) node only. Use the ALGSN command if the
Telephone Number for the Fusion network is required.
2. TYPE parameter designates the programming method of physical station (the result is the same whichever
selected). When TYPE = 1 (LENS) is selected, the physical station which accommodates the Telephone
Number (TELN) is specified by the LENS. Likewise, TYPE = 2 (STN) is selected, the physical station
number (STN) is used.
3. The system data assignment (ASYDL, SYS1, INDEX513 Data 01hex) is needed to provide the Local Data
Memory (LDM).
4.  Prior to assigning this command, the Telephone Number (TELN) should be entered by the ALGNL
command. 
5. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8.
6. When deleting the telephone number, the user must first delete the data which is concerned with Group
Calling Conference. 
						

							ND-70290 (E) CHAPTER 5
Page 261
Revision 3.0
ALGSL
3. DATA ENTRY INSTRUCTIONS
  TYPE = 1 (LENS is used to specify the Telephone number.)
  TYPE = 2 (STN is used to specify the Telephone number.)
TELEPHONE NUMBER
 (TELN) MAX. 16 DIGITSLINE EQUIPMENT NUMBER USER GROUP
NUMBER
(UGN)
UGN TYPE
 1 = User Group Number 1 (Fixed)
LENS
LENS of the physical stationTYPE
1 = LENS is used to specify the Telephone number
2 = STN is used to specify the Telephone number
1
1 1
1
(LENS)
11
TELN
Telephone number assigned by the 
ALGNL command
TELEPHONE NUMBER
 (TELN) MAX. 16 DIGITSSTATION
NUMBER
(STN) TENANT
NUMBER
(TN) USER GROUP
NUMBER
(UGN)
UGN TYPE
 1 = User Group Number 1 (Fixed)
STN
Station number of the 
physical stationTYPE
1 = LENS is used to specify the Telephone number
2 = STN is used to specify the Telephone number
1
1 2
2
TN
Tenant number of  the physical station
TELN
 Telephone number assigned by the ALGNL command 
						

							CHAPTER 5 ND-70290 (E)
Pag e 2 62
Revision 3.0
ALGSL
4. DATA SHEET
  TYPE=1 (LENS is used to specify the Telephone number.)
TYPEUSER GROUP
NUMBER
(UGN)TELEPHONE NUMBER
(TELN)LINE EQUIPMENT
NUMBER
(LENS)REMARKS
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11 
						

							ND-70290 (E) CHAPTER 5
Page 263
Revision 3.0
ALGSL
TYPE=2 (STN is used to specify the Telephone number.)
TYPEUSER GROUP
NUMBER
(UGN)TELEPHONE NUMBER
(TELN)TENANT 
NUMBER
(TN)STATION 
NUMBER
(STN)REMARKS
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21