Home > Lucent Technologies > Communications System > Lucent Technologies Amis Analog Networking Guide

Lucent Technologies Amis Analog Networking Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Lucent Technologies Amis Analog Networking Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							AMIS Analog Networking  585-300-512  Issue 7
    May 1999
    Intuity System AMIS Administration 
    5-7 Local Machine Administration 
    5
    Figure 5-6. Local Machine Administration Screen
    4. Chec k the following  information on the sc reen:
    nMac hine Name — The examp le uses the name “ loc al”
    nConnec tion Typ e, Dial String , Data Rate, and  Channel—The values 
    in these field s are used  for loopb ac k testing  and  are not imp ortant 
    to AMIS Analog Networking
    nPassword  — The field  should  c ontain a five- to ten-c harac ter 
    p assword  for the loc al mac hine. The p assword  id entifies the loc al 
    mac hine to remote mac hines on the network. If you c hang e the 
    p assword  after initially ad ministering  the network, c ontac t eac h 
    remote mac hine network ad ministrator and  inform them of the 
    c hang e. Luc ent Tec hnolog ies rec ommend s that you d o not c hang e 
    the p assword  exc ept when ab solutely nec essary.
    NOTE:
    If any of the field s are not c orrec t, searc h your Intuity d oc umentation 
    for d ig ital networking .
    5. Press   (F6) to exit the sc reen.
    CANCEL 
    						
    							AMIS Analog Networking  585-300-512  Issue 7
    May 1999
    Intuity System AMIS Administration 
    5-8 Local Machine Administration 
    5
    Check the Local Machine Administration on the
    Intuity AUDIX Voice Messaging Feature Package
    Use the following  p roc ed ure to verify that the loc al mac hine has b een 
    ad ministered  c orrec tly on the AUDIX Voic e Messag e feature p ac kag e.
    1. Log  on to the Intuity system und er the SA log in and ac c ess the Intuity 
    Ad ministration menu, shown in Fi g u re  5 -1.
    2. Selec t AUDIX Ad ministration from the Intuity Ad ministration menu.
    After you selec t the op tion, you see a b lank AUDIX Voic e Messag ing  
    sc reen as shown in Fi g u re  5 - 7.
    Figure 5-7. Blank AUDIX Voice Messaging Screen
    3. Enter change machine
     at the enter command
     promp t. After you enter 
    the c ommand, you see the Mac hine Profile sc reen as shown in Fig ure 5-8. 
    						
    							AMIS Analog Networking  585-300-512  Issue 7
    May 1999
    Intuity System AMIS Administration 
    5-9 Local Machine Administration 
    5
    Figure 5-8. Local Machine Profile Screen 
    4. Chec k the following  information on the sc reen:
    nPrefix — Not typ ic ally used  for the loc al mac hine
    nExtension Rang es — Must not overlap  with planned  AMIS/messag e 
    delivery addresses
    nThe remaining  field s on the sc reen are d isp lay-only. 
    NOTE:
    If any of the field s are not c orrec t, searc h your Intuity d oc umentation 
    for d ig ital networking .
    5. Press   (F1) to exit the sc reen.
    CANCEL 
    						
    							AMIS Analog Networking  585-300-512  Issue 7
    May 1999
    Intuity System AMIS Administration 
    5-10 Administer Loopback Test Mailbox (Optional) 
    5
    Administer Loopback Test Mailbox 
    (Optional)
    This task is op tional for the AMIS Analog  Networking  feature and d oes not ap p ly 
    to the Message Delivery feature. The loop bac k test mailb ox is used to test the 
    AMIS Analog  Networking  feature. Any messag e d elivered  to this mailb ox c auses 
    a rep ly to be sent to the send ing  mailb ox. 
    If a remote user sends an AMIS messag e to this mailb ox, the loc al system send s 
    a c op y of the message to the 
    inc oming mailb ox of the remote user to ind ic ate the 
    messag e was rec eived . The loc al loop b ac k test mailb ox keep s a c op y of the 
    messag e head er in its 
    outg oing mailb ox. Use the following  p roc ed ure to 
    ad minister a loop b ac k test mailbox.
    1. Log  on to the Intuity system und er the SA log in and ac c ess the Intuity 
    Ad ministration menu, shown in Fi g u re  5 -1.
    2. Selec t AUDIX Ad ministration from the Intuity Ad ministration menu.
    After you selec t the op tion, you see a b lank AUDIX Voic e Messag ing  
    sc reen as shown in Fi g u re  5 - 7.
    3. Enter add subscriber
     
     at the c ommand  p romp t. 
    Fo r  
    , selec t a name that is not d efined  for any other 
    sub sc rib er, for examp le, you mig ht use the name loop b ac k). 
    4. Type an 
    unused loc al extension in the Extension field . 
    You must enter this same extension on the System Parameters Analog  
    Network sc reen in the next sec tion, Ad minister AMIS Analog /Messag e 
    Delivery Parameters.
    5. Ad minister any other loc al p arameters that are relevant (for examp le, 
    c hec k the Community ID field ). 
    6. Press   (F3) to ad d  the test mailb ox and  exit the sc reen. 
    ENTER 
    						
    							AMIS Analog Networking  585-300-512  Issue 7
    May 1999
    Intuity System AMIS Administration 
    5-11 Administer AMIS Analog/Message Delivery Parameters 
    5
    Administer AMIS Analog/Message
    Delivery Parameters
    To imp lement the AMIS Analog Networking  or the Messag e Delivery p arameters, 
    you must ad minister c ertain p arameters on the System Parameters Analog  
    Network sc reen as d esc rib ed  in this sec tion. 
    NOTE:
    You c an ac c ess this sc reen only if the AMIS Analog  Networking  feature has 
    b een enab led by Luc ent Tec hnolog ies p ersonnel. If you c annot ac c ess this 
    sc reen, c ontac t your remote supp ort rep resentative. 
    Use the following  p roc ed ure to administer the AMIS Analog  Networking  or the 
    Messag e Delivery feature p arameters. 
    1. Log  on to the Intuity system und er the SA log in and ac c ess the Intuity 
    Ad ministration menu, shown in Fi g u re  5 -1.
    2. Selec t AUDIX Ad ministration from the Intuity Ad ministration menu.
    After you selec t the op tion, you see a b lank AUDIX Voic e Messag ing  
    sc reen as shown in Fi g u re  5 - 7.
    3. Enter change system-parameters analog-network
     at the c ommand  
    prompt. 
    After you enter the c ommand , you see the System-Parameters 
    Analog-Network screen as shown in Fi g u re  5 - 9.
    Figure 5-9. System-Parameters Analog-Network Screen (Intuity AUDIX 3.2) 
    						
    							AMIS Analog Networking  585-300-512  Issue 7
    May 1999
    Intuity System AMIS Administration 
    5-12 Administer AMIS Analog/Message Delivery Parameters 
    5
    4. Move throug h the following  sc reen field s b y p ressing the   or arrow 
    keys, and  c hang e any field s need ed  to imp lement the AMIS Analog  
    Networking  or Message Delivery features: 
    a. CALLBACK NUMBERS 
    Enter the c omp lete telep hone numb er need ed  for the remote 
    mac hine to c all the loc al system. The Loc al Numb er is the hunt 
    g roup number assig ned  to the analog voic e p orts. 
    The Country Code c an have a maximum of four dig its, the 
    Area/Trunk Numb er a maximum of seven, and  the Loc al Numb er a 
    maximum of 15. However, the 
    complete callbac k number (c ountry 
    c od e, area/trunk number, and  loc al number) c annot exc eed  15 
    d ig its. A c ountry c od e and  an area/trunk numb er are always 
    rec ommend ed and  may b e req uired . Some examp les of c ountry 
    codes are: 
    nIf the loc al system is in the United  States or Canad a and  
    uses the public network, enter a 1
     for the c ountry c od e. 
    nIf you are in another c ountry, enter the ap p rop riate c ountry 
    c od e (suc h as 44
     for the United  King d om). Country c odes 
    should  b e listed  in your loc al phone b ook. 
    nYou may enter a c ountry c od e of 0
     to allow an Intuity system 
    to work in a mixed -vendor environment over a p rivate 
    network. The c od e may b e used  for p rivate networks in any 
    country.
    On Intuity AUDIX 3.0 and later systems, up  to five c allb ac k 
    numbers may be defined. This allows different nodes to use 
    d ifferent telep hone numb ers to c all the same AMIS mac hine. For 
    examp le, an AMIS analog  network may inc lud e some nod es 
    ac c essed  over the p ub lic  network, and  other nod es ac c essed  over 
    a p rivate network. Vend ors other than Luc ent Tec hnolog ies may 
    also req uire the AMIS c allb ac k numb ers to b e ad ministered  in a 
    p artic ular way. For c onvenienc e, c allb ac k numbers that are 
    ad ministered  on this sc reen are also listed  on Pag e 2 of the 
    Mac hine sc reen, so you c an easily selec t the ap p rop riate c allb ac k 
    numb er you wish to use for eac h remote AMIS mac hine. 
    The default callbac k number is 1
    . If a system with a sing le c allb ac k 
    numb er is up g rad ed to run 3.3 or later software, the existing 
    c allb ac k numb er will be p lac ed  in the d efault selec tion 1
    . If an 
    ad d itional c allb ac k number is d efined  on this sc reen and  then 
    d eleted , the Callb ac k Numb er field  on the Mac hine Profile sc reen 
    for any remote nod e that used  that numb er will automatic ally be 
    c hang ed  to show the d efault c allb ac k numb er 1
    . An entry will 
    ap p ear in the administration log  whenever c allb ac k numb ers are 
    deleted or changed.
    TA B 
    						
    							AMIS Analog Networking  585-300-512  Issue 7
    May 1999
    Intuity System AMIS Administration 
    5-13 Administer AMIS Analog/Message Delivery Parameters 
    5
    b . AMIS Analog  Networking  Inc oming  Allowed ? 
    This field  app lies only to AMIS analog  networking . 
    Set this field to y
     if you want the loc al system to ac c ep t inc oming 
    AMIS analog  c alls. Set this field  to n
     if you want the loc al system to 
    refuse inc oming AMIS c alls. 
    c . AMIS Analog  Networking  Outg oing  Allowed ? 
    This field applies to 
    both AMIS analog  networking  and  messag e 
    delivery. 
    Set this field to y
     if you want the loc al system sub sc rib ers to send  
    AMIS analog  networking  and /or messag e d elivery messag es. Set 
    this field  to n 
    if you want to p revent sub sc rib ers from send ing  AMIS 
    analog networking  and /or messag e delivery messag es. 
    d . AMIS Prefix
    This field  app lies only to AMIS analog  networking . 
    You may enter an AMIS p refix to id entify an ad d ress as an AMIS 
    analog ad d ress. If the add ress rang es d efined  for AMIS one- or 
    two-step  add ressing  d o not overlap  with any p reviously d efined  
    ad d ress rang es, it is not nec essary to d efine an AMIS p refix. 
    However, if any AMIS or messag e d elivery ad d ress rang es overlap , 
    you may need  to administer an AMIS p refix to make the AMIS 
    ad d resses uniq ue. 
    NOTE:
    If an AMIS prefix is d efined , sub sc rib ers must d ial the AMIS 
    p refix when add ressing  AMIS analog  messag es. The AMIS 
    prefix 
    must p rec ed e any other d igits in the ad d ress p refix(es) 
    that sub sc rib ers d ial. These dig its are sp ec ified  on the 
    Machine Profile sc reen.  
    						
    							AMIS Analog Networking  585-300-512  Issue 7
    May 1999
    Intuity System AMIS Administration 
    5-14 Administer AMIS Analog/Message Delivery Parameters 
    5
    e.AMIS Protoc ol—Use 8 Minutes For Inc oming  Messag e Leng th 0? 
    This field  app lies only to AMIS analog  networking . 
    Some non-Luc ent Tec hnolog ies remote voic e mail systems c annot 
    sp ec ify the messag e leng th and  use a zero (0) in the protoc ol. This 
    field  enab les the loc al system to rec ord  these inc oming  messages 
    as follows: 
    nEn t e r  y
     for the loc al system to assume an inc oming  messag e 
    of unknown leng th is 8 minutes long , the maximum leng th 
    allowed  b y the AMIS p rotoc ol sp ec ific ation.
    nEn t e r  n
     if you d o not want the loc al system to assume an 
    inc oming  messag e of unknown leng th is 8 minutes long . In 
    this case, the system uses the number in the Message 
    Leng ths, Maximum field on the System Parameters Limits 
    sc reen. AMIS messag es long er than 8 minutes will not b e 
    ac c ep ted . 
    In either c ase, if an inc oming  messag e’s assumed  length is long er 
    than the spac e c urrently availab le in a sub sc rib er’s mailb ox, 
    d elivery of the messag e will b e aborted . 
    f. AMIS Loop b ac k Test Mailb ox Extension 
    This field  app lies only to AMIS analog  networking . 
    If you ad ministered  an AMIS loop b ac k mailb ox in the A d m i n i s t e r  
    Loop back Test Mailb ox (Op tional) sec tion, enter the extension for 
    the test mailb ox in this field . 
    5. Press   (F3) to save your c hang es and exit the sc reen. 
    ENTER 
    						
    							AMIS Analog Networking  585-300-512  Issue 7
    May 1999
    Intuity System AMIS Administration 
    5-15 Administer the Outcalling Periods 
    5
    Administer the Outcalling Periods
    The AMIS Analog  Networking  and  Messag e Delivery features use the outc alling  
    p orts to d eliver messag es. Althoug h outcalling  p eriod s must b e ad ministered , 
    the Outc alling  feature itself d oes 
    not need  to be ac tive for AMIS analog 
    networking  or messag e d elivery to work. 
    NOTE:
    For more effic ient use of system resourc es, the system ad ministrator may 
    wish to limit the times of d ay for send ing  AMIS analog networking  or 
    messag e d elivery messag es to those whic h are known to b e less busy. 
    Use the following  p roc ed ure to administer the AMIS Analog  Networking  or the 
    Messag e Delivery feature p arameters. 
    1. Log  on to the Intuity system und er the SA log in and ac c ess the Intuity 
    Ad ministration menu, shown in Fi g u re  5 -1.
    2. Selec t AUDIX Ad ministration from the Intuity Ad ministration menu.
    After you selec t the op tion, you see a b lank AUDIX Voic e Messag ing  
    sc reen as shown in Fi g u re  5 - 7.
    3. Enter change system-parameters outcalling
     at the c ommand  p romp t. 
    After you enter the c ommand , you see the System-Parameters Outc alling 
    sc reen as shown in Fig ure 5-10.
    Figure 5-10. System-Parameters Outcalling Screen 
    						
    							AMIS Analog Networking  585-300-512  Issue 7
    May 1999
    Intuity System AMIS Administration 
    5-16 Administer the Outcalling Periods 
    5
    4. Move throug h the following  sc reen field s b y p ressing the   or arrow 
    keys, and  c hang e any field s need ed  to imp lement the AMIS Analog  
    Networking  or Message Delivery features:
    a. Outcalling Active? 
    En t e r  n
     if you want to use the AMIS Analog  Networking  and /or 
    Message Delivery features and do 
    not want to ac tivate the 
    Outc alling  feature. Enter y
     if you want to use the Outcalling feature 
    in ad d ition to AMIS analog  networking  and /or messag e d elivery. 
    b . St a r t  Ti m e / En d  Ti m e  
    Sp ec ify at least one start time and  one end  time to imp lement AMIS 
    analog networking  and /or messag e delivery. Up  to three c yc les 
    (period s of time) may b e sp ec ified . The total time of the intervals 
    c an neither exc eed 24 hours nor overlap .
    NOTE:
    The AMIS analog  networking and  message d elivery 
    transmission times specified on the Machine Profile sc reen 
    must b e eq ual to or a sub set of the outc alling  p eriods 
    sp ec ified  here. Make a note of the outc alling  c yc le(s). 
    c . Interval 
    This field does 
    not ap p ly to AMIS analog  networking  or messag e 
    d elivery; the intervals in this field  ap p ly only to the Outc alling  
    feature (if ac tivated ). You will use the System Parameters Features 
    sc reen to ad minister the intervals for AMIS analog  networking  
    and/or message delivery, performed in the Ad minister 
    Retransmission Intervals sec tion. 
    d . Maximum Simultaneous Ports 
    Sp ec ify the maximum numb er of p orts that may b e used  
    simultaneously for outc alling , AMIS analog  networking , and /or 
    messag e d elivery during  the sp ec ified  c yc le. You may need  to 
    inc rease this numb er if you were p reviously using  the Outc alling 
    feature and  are now ad ding  the AMIS Analog  Networking and /or 
    Messag e Delivery features. See the Vo i c e  Po r t  N e e d s  sec tion in 
    Chapter 2, Planning  and  Desig n
    , for more information. 
    e. Initial Delay 
    This field does 
    not ap p ly to AMIS analog  networking  or messag e 
    d elivery. The field  is used only for the Outc alling  feature, if 
    ac tivated . 
    f. Maximum Numb er Dig its 
    This field does 
    not ap p ly to AMIS analog  networking  or messag e 
    d elivery. The field  ap p lies only to the Outc alling  feature, if ac tivated . 
    5. Press   (F3) to save your d ata and  exit the sc reen. 
    TA B
    ENTER 
    						
    All Lucent Technologies manuals Comments (0)

    Related Manuals for Lucent Technologies Amis Analog Networking Guide