Konica Minolta magicolor 4695MF User Manual

							Configuration Menu Overview 47
CAMERA DIRECT
USB SETTING
COMM. SETTING TONE/PULSE
LINE MONITOR
PSTN/PBX
USER SETTING PTT SETTING
DATE&TIME
DATE FORMAT
PRESET ZOOM
USER FAX NUMBER
USER NAME
AUTO REDIAL NUMBER OF REDIAL
INTERVAL
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 48
*1 This menu item appears when ADMIN. MANAGEMENT/NET-
WORK SETTING/TCP/IP
 is set to ENABLE.*2 This menu item appears when ADMIN. MANAGEMENT/NETWORK 
SETTING/IPv6/DISABLE/ENABLE 
is set to ENABLE.*3 This menu item appears when ADMIN. MANAGEMENT/E-MAIL 
SETTING/POP BEFORE SMTP/DISABLE/ENABLE
 is set to 
ENABLE.*4 This menu item appears when ADMIN. MANAGEMENT/E-MAIL 
SETTING/SMTP AUTH./DISABLE/ENABLE
 is set to ENABLE.*5 This menu item appears when ADMIN. MANAGEMENT/LDAP 
SETTING/DISABLE/ENABLE
 is set to ENABLE.
SUPPLIES 
REPLACETRANSFER BELT
FUSER UNIT
TRANSFER ROLLER
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 49
Manufacturer’s default settings appear in bold.
ADMINISTRATOR NO.Specify the new administrator access 
code.
REMOTE MONITORSettingOFF / ON
Select whether or not setting remote 
monitor.
If 
ON is selected, technical support can 
access the menu mode.
If 
OFF is selected, technical support 
cannot access the menu mode.
This setting is for technical 
support uses. Change the setting 
only when it is necessary.
NETWORK 
SETTINGTCP/IPSettingDISABLE / ENABLE
Select the setting for connecting to this 
machine through a network.
IP ADDR. SET-
TINGSettingAUTO / SPECIFY
Set the IP address of this printer on the 
network.
If 
AUTO is selected, the IP address will 
be assigned automatically.
If 
SPECIFY is selected, manually spec-
ify settings for 
IP ADDRESS, SUB-
NET MASK
 and GATEWAY.
DNS DNS 
AUTO 
SET-
TINGSettingDISABLE / ENABLE
Select whether or not the DNS server 
address is automatically assigned by 
the DHCP server.
SPEC-
IFYSpecify the DNS server address (up to 
three addresses).
The default setting is “0.0.0.0”.
DHCPSettingDISABLE / ENABLE
If there is a DHCP server on the net-
work, specify whether the IP address 
and other network information is auto-
matically assigned by the DHCP server.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 50
BOOTPSettingDISABLE / ENABLE
If there is a BOOTP server on the net-
work, specify whether the IP address 
and other network information is auto-
matically assigned by the BOOTP 
server.
ARP/PINGSettingDISABLE / ENABLE
Select whether or not the ARP/PING 
command is used when the IP address 
is assigned.
HTTPSettingDISABLE / ENABLE
Select whether or not to enable HTTP.
FTP SERVERSettingDISABLE / ENABLE
Select whether or not to enable the FTP 
server.
FTP TXSettingDISABLE / ENABLE
Select whether or not to enable the FTP 
client.
SMBSettingDISABLE / ENABLE
Select whether or not to enable SMB.
BONJOURSettingDISABLE / ENABLE
Select whether or not to enable Bonjour.
DYNAMIC DNSSettingDISABLE / ENABLE
Select whether or not to enable 
Dynamic DNS.
IPPSettingDISABLE / ENABLE
Select whether or not to enable IPP.
If HTTP is set to DISABLE, IPP 
cannot be set.
RAW 
PORTDIS-
ABLE/
ENABLESettingDISABLE / ENABLE
Select whether or not to enable the raw 
port.
BIDI-
REC-
TIONALSettingDISABLE / ENABLE
Select whether or not to enable raw port 
bidirectional communication.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 51
SLPSettingDISABLE / ENABLE
Select whether or not to enable SLP.
SNMPSettingDISABLE / ENABLE
Select whether or not to enable SNMP.
WSD PRINTSettingDISABLE / ENABLE
Select whether or not to enable WSD 
printing.
IPSECSettingDISABLE / ENABLE
Select whether or not to enable IPsec.
IP 
ADDR. 
FILTERACCESS 
PER.SettingDISABLE / ENABLE
Specify access permissions for IP 
address filtering.
ACCESS 
REFUSESettingDISABLE / ENABLE
Specify access blocking for IP address 
filtering.
IPv6 DIS-
ABLE/
ENABLESettingDISABLE / ENABLE
Select whether or not to enable IPv6.
AUTO 
SET-
TINGSettingYES/NO
Select whether or not to enable the IPv6 
auto setting.
LINK 
LOCALDisplays the link-local address.
GLOBAL 
ADDRES
SDisplays the global address.
GATE-
WAY 
ADDRES
SDisplays the gateway address.
NETWARESettingDISABLE / ENABLE
Select whether or not to enable Net-
Ware.
APPLETALKSettingDISABLE / ENABLE
Select whether or not to enable Apple-
Ta l k .
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 52
SPEED/DUPLEXSettingAUTO / 10BASE FULL / 
10BASE HALF / 
100BASE FULL / 
100BASE HALF / 
1000BASE FULL
Specifies the transmission speed for the 
network and the transmission method 
for bi-directional transmission. 
IEEE802.1XSettingDISABLE / ENABLE
Select whether or not to enable 
IEEE802.1X.
E-MAIL 
SETTINGSMTPSettingDISABLE / ENABLE
Select whether to enable or disable 
e-mail transmission operations for this 
machine.
SENDER NAMESpecify the name of the E-mail sender 
(up to 20 characters) used for network 
scanning.
The default setting is 
“magicolor_4695MF”.
E-MAIL ADDRESSSpecify the E-mail address (up to 64 
characters) of the E-mail sender used 
for network scanning.
DEFAULT SUB-
JECTSpecify the subject (up to 20 characters) 
of the E-mail message used for network 
scanning.
The default setting is “from 4695MF”.
SMTP SERVER 
ADDR.Specify the IP address or host name (up 
to 64 characters) for the SMTP server.
The default setting is “0.0.0.0”.
SMTP PORT NO.Setting1 to 65535 (Default: 25)
Specify the port number communicating 
with the SMTP server.
SMTP TIMEOUTSetting30 to 300 sec (Default: 
60 sec)
Select the amount of time (in seconds) 
until the connection with the SMTP 
server times out.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 53
TEXT INSERTSettingOFF / ON
Select whether or not the specified text 
is inserted into the E-mail message.
POP 
BEFORE 
SMTPDIS-
ABLE/
ENABLESettingDISABLE / ENABLE
Select whether or not to enable POP 
Before SMTP.
If 
ENABLE is selected, specify the time 
(between 0 and 60 seconds). The 
default setting is 
1sec.
POP3 
SERVER 
ADDR.Specify the host name or IP address for 
the POP3 server used for authentication 
with POP Before SMTP.
The default setting is “0.0.0.0”.
POP3 
PORT 
NO.Setting1 to 65535 (Default: 110)
Specify the port number used for com-
municating with the POP3 server.
POP3 
TIME-
OUTSetting30 to 300 sec (Default: 
30 sec)
Select the amount of time (in seconds) 
until the connection with the POP3 
server times out.
POP3 
ACCOUNTSpecify the user name (up to 63 charac-
ters) used for authentication with POP3 
server.
POP3 
PASS-
WORDSpecify the password (up to 15 charac-
ters) used for authentication with POP3 
server.
SMTP 
AUTH.DIS-
ABLE/
ENABLESettingDISABLE / ENABLE
Select whether or not to enable SMTP 
authentication.
SMTP 
USER-
NAMESpecify the user name (up to 63 charac-
ters) used for SMTP authentication.
SMTP 
PASS-
WORDSpecify the password (up to 15 charac-
ters) used for SMTP authentication.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 54
LDAP 
SETTINGDISABLE/ENABLESettingDISABLE / ENABLE
Select whether or not to enable the 
LDAP function.
LDAP SERVER 
ADDR.Specify the address (up to 64 charac-
ters) of the LDAP server.
The default setting is “0.0.0.0”.
LDAP PORT NO.Setting1 to 65535 (Default: 389)
Specify the port number of the LDAP 
server.
SSL SETTINGSettingDISABLE / ENABLE
Select whether or not to enable SSL.
SEARCH BASESpecify the search starting point (up to 
64 characters) in a hierarchical structure 
arranged on the LDAP server.
ATTRIBUTEThe conditions for searches can be 
specified as a name or e-mail address 
(up to 32 characters).
The default setting is “cn”.
SEARCH METHODSettingBEGIN / CONTAIN / END
The specified characters can be 
searched for at the beginning, within or 
at the end.
LDAP TIMEOUTSetting5 to 300 sec (Default: 
60 sec)
Specify the maximum wait time during a 
search.
MAX.SEARCH 
RESULTSSetting5 to 100 (Default: 100)
Specify the maximum number of desti-
nations displayed after a search.
AUTHENTICATIONSettingANONYMOUS / SIMPLE / 
DIGEST-MD5 / 
GSS-SPNEGO
Select the authentication method used 
for logging on to the LDAP server.
LDAP ACCOUNTSpecify the account (up to 64 charac-
ters) used to connect to the LDAP 
server.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 55
LDAP PASSWORDSpecify the password (up to 32 charac-
ters) used to connect to the LDAP 
server.
DOMAIN NAMESpecify the domain name (up to 64 
characters) used to connect to the 
LDAP server.
CAMERA DIRECTSettingDISABLE / ENABLE
USB SETTING
SettingWindows / Mac
Select the operating system of the PC to 
which this machine is connected with a 
USB cable.
COMM. 
SETTINGTONE/PULSESettingTONE / PULSE
Select the dialing system. If this param-
eter is not correctly set to the type of 
dialing system used, faxes cannot be 
sent and received.
Select the correct setting after checking 
which type of dialing system is used by 
your telephone line.
If PTT SETTING in the USER 
SETTING
 menu is set to 
U.S.A, CANADA or NEW 
ZEALAND
, the settings cannot 
be changed.
LINE MONITORSettingOFF / LOW / HIGH
Select the volume of the monitoring 
sound of the transmission signal.
PSTN/PBXSettingPSTN / PBX
Select whether the connected tele-
phone wiring is a public switched tele-
phone network (PSTN) or a private 
branch exchange (PBX).
For a PBX system, the prefix number 
(outside line access number or exten-
sion number) can be specified.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 56
USER 
SETTINGPTT SETTINGSettingARGENTINA / AUSTRA-
LIA
 / AUSTRIA / BEL-
GIUM
 / BRAZIL / 
CANADA / CHINA / 
CZECH / DENMARK / 
EUROPE / FINLAND / 
FRANCE / GERMANY / 
GREECE / HONG KONG / 
HUNGARY / IRELAND / 
ISRAEL / ITALY / 
JAPAN / KOREA / 
MALAYSIA / MEXICO / 
THE NETHERLANDS / 
NEW ZEALAND / NORWAY 
/ 
PHILIPPINES / 
POLAND / PORTUGAL / 
RUSSIA / SAUDI ARA-
BIA
 / SINGAPORE / 
SLOVAKIA / SOUTH 
AFRICA
 / SPAIN / SWE-
DEN
 / SWITZERLAND / 
TAIWAN / TURKEY / 
U.S.A / UNITED KING-
DOM
 / VIETNAM
Select the country where this machine 
is installed.
DATE&TIMESettingTIME: 00:00-23:59 
(Default: 
00:00 )
DATE: ’07/01/01-’32/12/31 
(Default: ’
07/01/01)
ZONE: 
GMT+12:00-GMT-12:00 (in 
30-minute intervals) 
(Default: 
GMT+00:00)
Use the keypad to specify the current 
date, time and time zone.
DATE FORMATSettingMM/DD/YY / DD/MM/YY / 
YY/MM/DD
Select the display format for reports and 
lists.
Downloaded From ManualsPrinter.com Manuals