Konica Minolta magicolor 4695MF User Manual
Have a look at the manual Konica Minolta magicolor 4695MF User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3Media Handling Downloaded From ManualsPrinter.com Manuals
Print Media 108 Print Media Specifications Media Media Size Tray* Duplex Copy Print FAX Inch Millimeter A4 8.2 x 11.7 210.0 x 297.0 1/2/3 Yes Yes Yes Yes B5 (JIS) 7.2 x 10.1 182.0 x 257.0 1/2/3 Yes Yes Yes No A5 5.9 x 8.3 148.0 x 210.0 1/2 No Yes Yes No Legal 8.5 x 14.0 215.9 x 355.6 1/3 Yes Yes Yes Yes Letter 8.5 x 11.0 215.9 x 279.4 1/2/3 Yes Yes Yes Yes Statement 5.5 x 8.5 139.7 x 215.9 1/2 No Yes Yes No Executive 7.25 x 10.5 184.2 x 266.7 1/2/3 Yes Yes Yes No Folio 8.25 x 13.0 210.0 x 330.0 1 Yes Yes Yes No Letter Plus 8.5 x 12.69 215.9 x 322.3 1 Yes No Yes No UK Quarto 8.0 x 10.0 203.2 x 254.0 1/2 No No Yes No Foolscap 8.0 x 13.0 203.2 x 330.2 1 Yes No Yes No Government Legal 8.5 x 13.0 215.9 x 330.2 1/3 Yes Yes Yes No Kai 16 7.3 x 10.2 185.0 x 260.0 1/2 Yes No Yes No Kai 32 5.1 x 7.3 130.0 x 185.0 1/2 No No Yes No Government letter8.0 x 10.5 203.2 x 266.7 1/2 Yes Yes Yes No 16 K 7.7 x 10.6 195.0 x 270.0 1/2 Yes No Yes No Oficio** 8.5 x 13.5 215.9 x 342.9 1 Yes Yes Yes Yes Photo size 4x6 4.0 x 6.0 101.6 x 152.4 1/2 No No Yes No Photo size 10x15 3.9 x 5.9 100.0 x 150.0 1/2 No No Yes No J-Postcard 3.9 x 5.8 100.0 x 148.0 1 No Yes Yes No Double Postcard 5.8 x 7.9 148.0 x 200.0 1 No Yes Yes No B5 (ISO) 6.9 x 9.8 176.0 x 250.0 1 Yes No No No Envelope Com10 4.125 x 9.5 104.8 x 241.3 1 No Yes Yes No Envelope DL 8.7 x 4.3 220.0 x 110.0 1 No Yes Yes No Envelope Monarch 7.5 x 3.875 190.5 x 98.4 1 No Yes Yes No Envelope C6 6.4 x 4.5 162.0 x 114.0 1 No Yes Yes No Envelope Chou #3 4.7 x 9.2 120.0 x 235.0 1 No Yes Yes No Envelope You #6 7.5 x 3.875 190.5 x 98.4 1 Yes No No No Custom, Minimum3.6 x 5.9 92.0 x 148.0 1/2 Yes Yes Yes No Custom, Maximum8.5 x 14.0 216.0 x 356.0 1/2*** Yes Yes Yes No Thick Stock—Only supported for letter, A4, and smaller media. Notes: *Tray 1 = Multipurpose Tray 2/3 = Plain paper only **Oficio = Mexico only ***Tray 2 = 216.0 x 297.0 Downloaded From ManualsPrinter.com Manuals
Print Media 109 Types Before purchasing a large quantity of special media, do a trial print with the same media and check the print quality. Keep media on a flat, level surface in its original wrapper until it is time to load it. For a list of approved media, refer to http://printer.konicaminolta.com. Plain Paper (Recycled Paper) Use plain paper that is „Suitable for plain paper printers and copiers, such as standard or recycled office paper. Note Do not use the media types listed below. These could cause poor print quality, media misfeeds, or damage to the machine. DO NOT use media that is „Coated with a processed surface (such as carbon paper and colored paper that has been treated) „Carbon backed „Unapproved iron-on transfer media (such as heat-sensitive paper, heat-pressure paper, and heat-press transfer paper) „Cold-water-transfer paper „Pressure sensitive Capacity Tray 1Up to 100 sheets, depending on the media weight Tray 2Up to 250 sheets, depending on the media weight Tray 3Up to 500 sheets, depending on the media weight Orientation Tray 1Face down Tray 2/3Face up Driver Media Type Plain Paper (Recycled) Weight60 to 90 g/m² (16 to 24 lb bond) DuplexingRefer to “Specifications” on page 108. Downloaded From ManualsPrinter.com Manuals
Print Media 110 „Designed specifically for inkjet printers (such as superfine paper, glossy film, and postcards) „Already been printed on by another printer, copier, or fax machine „Dusty „Wet (or damp) Keep media between 15% and 85% relative humidity. Toner does not adhere well to moist or wet media. „Layered „Adhesive „Folded, creased, curled, embossed, warped, or wrinkled „Perforated, three-hole punched, or torn „Too slick, too coarse, or too textured „Different in texture (roughness) on the front and back „Too thin or too thick „Stuck together with static electricity „Composed of foil or gilt; too luminous „Heat sensitive or cannot withstand the fusing temperature (180°C [356°F]) „Irregularly shaped (not rectangular or not cut at right angles) „Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons „Acidic „Any other media that is not approved Thick Stock Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all thick stock to ensure acceptable performance and to ensure that the image does not shift. You can print continuously with thick stock. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Capacity Tray 1 Up to 20 sheets, depending on their thick- ness Tray 2/3Not supported OrientationFace down Downloaded From ManualsPrinter.com Manuals
Print Media 111 DO NOT use thick stock that is „Mixed with any other media in the trays (as this will cause media misfeed- ing) Envelope Print on the front (address) side only. Some parts of the envelope consist of three layers of paper—the front, back, and flap. Anything printed in these lay- ered regions may be lost or faded. You can print continuously with envelope. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Use envelopes that are „Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps Because the envelopes pass through heated rollers, the gummed area on the flaps may seal. Using envelopes with emulsion-based glue avoids this problem. „Approved for laser printing „Dry Driver Media TypeThick Stock 1 Thick Stock 2 Weight91 to 210 g/m² (25 to 55.9 lb bond) DuplexingNot supported Capacity Tray 1 Up to 10 sheets, depending on their thick- ness Tray 2/3Not supported OrientationFace down Driver Media TypeEnvelope Weight 91 to 163 g/m 2 (25 to 43 lb bond) DuplexingNot supported Downloaded From ManualsPrinter.com Manuals
Print Media 112 DO NOT use envelopes that have „Sticky flaps „Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal- ing „Transparent windows „Too rough of a surface „Material that will melt, vaporize, offset, discolor, or emit dangerous fumes „Been presealed Label A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet: „The face sheet must follow the plain paper specification. „The face sheet surface must cover the entire carrier sheet, and no adhe- sive should come through on the surface. You can print continuously with label sheets. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Try printing your data on a sheet of plain paper first to check placement. Check your application documentation for more information on printing labels. Use label sheets that are „Recommended for laser printing DO NOT use label sheets that „Have labels that easily peel off or have parts of the label already removed „Have backing sheets that have peeled away or have exposed adhesive Capacity Tray 1 Up to 20 sheets, depending on their thick- ness Tray 2/3Not supported OrientationFace down Driver Media TypeLabels Weight 60 to 163 g/m 2 (16 to 43 lb bond) DuplexingNot supported Downloaded From ManualsPrinter.com Manuals
Print Media 113 Labels may stick to the fuser, causing them to peel off and media misfeeds to occur. „Are precut or perforated Letterhead You can print continuously with letterhead. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Try printing your data on a sheet of plain paper first to check placement. Postcard You can print continuously with postcard. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Try printing your data on a sheet of plain paper first to check placement.Capacity Tray 1Up to 20 sheets, depending on their size and thickness Tray 2/3Not supported OrientationFace down Driver Media TypeLetterhead Weight 60 to 90 g/m 2 (16 to 24 lb bond) DuplexingRefer to “Specifications” on page 108. Capacity Tray 1 Up to 20 sheets, depending on their thick- ness Tray 2/3Not supported Do not useOK to use Shiny backed paper Full-page labels (uncut) Downloaded From ManualsPrinter.com Manuals
Print Media 114 Use postcards that are „Approved for laser printing DO NOT use postcards that are „Coated „Designed for inkjet printers „Precut or perforated „Preprinted or multicolored If the postcard is warped, press on the warped area before putting it in the tray. „Folded or wrinkled Transparency Do not fan transparencies before loading them. Resulting static elec- tricity may cause printing errors. If you touch the face of the transparencies with your bare hands, print quality may be affected. Keep the media path clean. Transparencies are especially sensitive to a dirty media path. If there are shadows on either the top or the bottom of the sheets, see chapter 10, “Maintenance”. Remove transparencies as soon as possible from the output tray to avoid static buildup. OrientationFace down Driver Media TypePostcard Weight 60 to 163 g/m 2 (16 to 43 lb bond) DuplexingNot supported Downloaded From ManualsPrinter.com Manuals
Print Media 115 You can print continuously with transparencies. However, this could affect the media feed, depending on the media quality, static buildup, and printing envi- ronment. Try printing your data on a sheet of plain paper first to check placement. If you have problems feeding 20 sheets, try loading only 1–10 sheets at a time. Loading a large number of transparencies at one time may cause static buildup, causing feeding problems. Always first test a small quantity of a particular type of transparency. Use transparencies that are „Approved for laser printing DO NOT use transparencies that „Have static electricity that will cause them to stick together „Are specified for inkjet printers only Glossy Media Test all glossy media to ensure acceptable performance and to ensure that the image does not shift. You can print continuously with glossy media. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time.Capacity Tray 1 Up to 20 sheets, depending on their thick- ness Tray 2/3Not supported OrientationFace down Driver Media TypeTransparency DuplexingNot supported Capacity Tray 1 Up to 20 sheets, depending on their thick- ness Tray 2/3Not supported OrientationFace down Downloaded From ManualsPrinter.com Manuals
Print Media 116 DO NOT use glossy media that is „Mixed with any other media in the trays (as this will cause media misfeed- ing) „Specified for inkjet printers only Driver Media TypeGlossy 1 Glossy 2 DuplexingNot supported Downloaded From ManualsPrinter.com Manuals