Konica Minolta magicolor 4695MF User Manual
Have a look at the manual Konica Minolta magicolor 4695MF User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Hard Disk Kit 307 Hard Disk Kit If you install a hard disk kit, the followings can be performed: „Job printing/saving „Fonts/forms/color profile download „User Authentication „Direct printing A hard disk kit and a CF adapter cannot be installed simultaneously. Installing the Hard Disk kit Note Its very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on page 303. In addition, always handle circuit boards by the edges only. 1Turn off the machine and discon- nect the power cord and inter- face cables. Downloaded From ManualsPrinter.com Manuals
Hard Disk Kit 308 2Remove the rear cover. 3Using a screwdriver, loosen the screw. Do not remove any screw other than the one indicated in the illustration. 4Open the inside cover. Downloaded From ManualsPrinter.com Manuals
Hard Disk Kit 309 5Plug the cable on the hard disk kit into the connector on the con- troller board. 6Insert the three mounting pins on the hard disk kit into the holes in the controller board to mount the hard disk kit onto the control- ler board. 7Close the inside cover, and then tighten the screw. 8Close the rear cover. 9Reconnect all interface cables. Downloaded From ManualsPrinter.com Manuals
Hard Disk Kit 310 10Reconnect the power cord, and turn on the machine. 11Declare the Hard Disk in the Windows printer driver (Properties/Configure tab). Downloaded From ManualsPrinter.com Manuals
CompactFlash 311 CompactFlash If you install a CompactFlash card, the followings can be performed: „Fonts/forms/color profiles download „User Authentication „Direct printing (including the use of PageScope Direct Print) Only CompactFlash cards with a capacity of 512 MB, 1 GB, 2GB or 4GB can be used. The job printing/saving function is not available with a CompactFlash card. These functions require that an optional hard disk kit be installed. A hard disk kit and a CF adapter cannot be installed simultaneously. Installing the CF adapter and CompactFlash card Note If the installed CompactFlash card is used with a device other than this printer, such as a computer or digital camera, the card is automatically formatted and all of its data is deleted. Note Its very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on page 303. In addition, always handle circuit boards by the edges only. Downloaded From ManualsPrinter.com Manuals
CompactFlash 312 1Turn off the machine and discon- nect the power cord and inter- face cables. 2Remove the rear cover. 3Using a screwdriver, loosen the screw. Do not remove any screw other than the one indicated in the illustration. Downloaded From ManualsPrinter.com Manuals
CompactFlash 313 4Open the inside cover. 5Plug the cable on the CF adapter into the connector on the controller board. 6Insert the three mounting pins on the CF adapter into the holes in the controller board to mount the CF adapter onto the control- ler board. Downloaded From ManualsPrinter.com Manuals
CompactFlash 314 7Fully insert the CompactFlash card into the appropriate slot. When the CompactFlash card is correctly inserted, the button on the top side of the slot (circled in the illustration) slightly pops out. Before removing the CompactFlash card, press in this button. 8Close the inside cover, and then tighten the screw. 9Close the rear cover. 10Reconnect all interface cables. 11Reconnect the power cord, and turn on the machine. 12Declare the Memory card in the Windows printer driver (Properties/Con- figure tab). Downloaded From ManualsPrinter.com Manuals
Tray 3 (Lower Feeder Unit) 315 Tray 3 (Lower Feeder Unit) You can install up to one optional lower feeder unit (Tray 3). The lower feeder unit increases your machine’s media feed capacity by 500 sheets. Kit Contents „Lower feeder unit with a tray (500-sheet capacity) Downloaded From ManualsPrinter.com Manuals
Tray 3 (Lower Feeder Unit) 316 Installing Tray 3 Note Since consumables are installed in the machine, be sure to keep the machine level when moving it in order to prevent accidental spills. 1Turn off the machine and discon- nect the power cord and inter- face cables. 2Prepare the lower feeder unit. Be sure to place the lower feeder unit on a level surface. 3Open the right side cover of the lower feeder unit. The right side cover of the lower feeder must be opened before the feeder can be installed onto the machine. Downloaded From ManualsPrinter.com Manuals