Canon Lbp 5200 User Guide
Have a look at the manual Canon Lbp 5200 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 328
Paper Jams7-13
Troubleshooting
7
10Close the top cover.
Hold the grip on the top cover and close it gently.
If a message continues to appear in the Printer Status Window about paper
jammed inside the printer when the top cover is closed, there is a possibility that
torn pieces of paper are still left inside the printer. Inspect each part of the printer
again, and completely remove all pieces of jammed paper.
Paper Jam Behind the Printer
If the message [Paper Jam behind Printer] appears in the Printer...](http://img.usermanuals.tech/thumb/14/56539/w64_canon_lbp-5200-user-guide-327.png "Page 328
Paper Jams7-13
Troubleshooting
7
10Close the top cover.
Hold the grip on the top cover and close it gently.
If a message continues to appear in the Printer Status Window about paper
jammed inside the printer when the top cover is closed, there is a possibility that
torn pieces of paper are still left inside the printer. Inspect each part of the printer
again, and completely remove all pieces of jammed paper.
Paper Jam Behind the Printer
If the message [Paper Jam behind Printer] appears in the Printer...")
Paper Jams7-16 Troubleshooting 7 If paper is jammed in the drum cartridge, do not try to pull the paper out forcefully but refer to Paper Jam in the Drum Cartridge, on p. 7-26. IMPORTANT •If you touch the inner drum with your hand or scratch it, the printing quality will be degraded. Do not touch or open the drum protective shutter under any circumstances. Be careful not to hold or touch sensitive areas such as the sensor or electrical contacts. Doing so may damage the drum cartridge. •Do not expose the drum cartridge to direct sunlight or strong light. Drum Protective Shutter Sensor
Paper Jams7-17 Troubleshooting 7 •Do not hold or touch the electrical contacts. Doing so may damage the drum cartridge. •Do not hold or touch the transfer belt. Doing so will degrade the printing quality. Do not jolt the drum cartridge memory or bring it near a magnetic field. Doing so may damage the drum cartridge. 6Place the drum cartridge in the protective bag. Electrical Contacts Electrical Contacts Drum Cartridge Memory Transfer Belt
Paper Jams7-18 Troubleshooting 7 7Press the green lock release lever a and pull out the jammed paper b. IMPORTANT If you could not find the jammed paper using the above procedures, it is possible that the paper is jammed inside the fuser unit in the back of the printer. In this case, skip steps 7 to 9 and follow step 10 ( ➞ p. 7-20) onwards to clear the jam. Do not close the top cover of the printer while you follow these steps. Doing so may make the paper jam even harder to clear. Once you have cleared the paper jam from inside the fuser unit, follow steps 7 to 9 to install the drum cartridge. 8Take the drum cartridge out of the protective bag. a b
Paper Jams7-19 Troubleshooting 7 9Hold the drum cartridge with both hands and insert it into the printer. Align the triangular mark on the drum cartridge with the triangular mark on the printer as you insert the drum cartridge a. Lock the drum cartridge by pulling it down toward you b. IMPORTANT Firmly lock the drum cartridge until it is in the state shown in the figure. a b
Paper Jams7-20 Troubleshooting 7 10Close the top cover. Hold the grip on the top cover and close it gently. If the paper jam message is still displayed after closing the top cover, proceed to the following procedure. 11If the paper jammed message is not cleared, press the power switch to turn the printer off a, remove the USB cable b, and disconnect the power plug from the power outlet c. a bc
Paper Jams7-21 Troubleshooting 7 CAUTION The area around the fuser unit becomes hot when the printer is used. Make sure the fuser unit is completely cool before performing the following procedure. If you touch the fuser unit while it is still hot you may be injured. 12Return the green pressure release levers on the fuser unit to their original positions. 13Close the sub-output tray.
Paper Jams7-22 Troubleshooting 7 14Turn the two lock release levers located on the back of the printer in the direction of the arrows to release the lock. 15Hold the grip on the fuser unit and remove it. CAUTION The fuser unit weighs approximately 1.7 kg, and is heavier at the rear end. Make sure you have a firm grip when you hold the fuser unit. If you drop the fuser unit on your feet you may be injured. Heavier on the back side
Paper Jams7-23 Troubleshooting 7 16Open the sub-output tray. 17Tilt both the green pressure release levers on the left and right side of the fuser unit towards you to release the pressure in the fuser unit. 18Pull out any jammed paper. IMPORTANT If the paper is completely wound around the fusing roller and is impossible to remove, contact your Canon dealer.
Paper Jams7-24 Troubleshooting 7 19Return the green pressure release levers on the fuser unit to their original positions. 20Close the sub-output tray. 21Hold the grip on the fuser unit and install it securely.
Paper Jams7-25 Troubleshooting 7 22Lock the fuser unit by turning the two lock release levers in the directions of the arrows. 23Connect the interface cables except for the USB cable, and connect the power cord. 24Plug the power plug into the AC power outlet. 25Connect the USB cable. 26Press the power switch to turn the printer on. If a message continues to appear in the Printer Status Window about paper jammed behind the printer when the printer is turned on, there is a possibility that torn pieces of paper are still left inside the printer. Inspect each part of the printer again, and completely remove all pieces of jammed paper.