Canon Lbp 5200 User Guide

							Moving the Printer5-44
Routine Maintenance
5
1Press the power switch to turn the printer off aa a a
, remove the 
USB cable bb b b
, and disconnect the power plug from the power 
outlet cc c c
.
2Remove all the interface cables and the power cord from the 
printer.
3Detach the printer from the paper feeder.
Hold the grips located on either side of the printer securely with both hands.
a
bc
 
						

							Moving the Printer5-45
Routine Maintenance
5
4Carry the paper feeder to the installation site.
When carrying the paper feeder, hold the grips on both sides as shown in the 
figure.
IMPORTANT
Make sure there is enough space set aside at the installation site for attaching 
cables, etc.
5Put the printer down slowly on the paper feeder.
Place the printer so that the transport grips align with the pockets on the paper 
feeder.
CAUTION
Put the printer down slowly and carefully on the paper feeder. You may be 
injured if your hands, etc. are pinched by the printer.
Grips for Moving
Pockets
 
						

							Moving the Printer5-46
Routine Maintenance
5
6Connect the interface cables except for the USB cable, and 
connect the power cord.
7Plug the power plug into the AC power outlet.
8Connect the USB cable.
●Transporting the Printer
When transporting the printer for reasons such as relocating, remove the toner 
cartridges and store the printer and the parts in the package that they came in 
with the protective materials attached in order to prevent them from being 
damaged while being transported.
If the original package and packing materials are not available, find an 
appropriate box and packing materials and pack the printer and the parts 
appropriately.
 
						

							Handling the Printer5-47
Routine Maintenance
5
Handling the Printer
This printer uses a variety of electronic components and delicate optical 
components. Read the following section carefully, and take care when handling the 
printer.
IMPORTANT
The methods for handling the printer are also described in Important Safety 
Instructions, on p. xv.
Precautions for Handling the Printer
To ensure that you can always achieve high quality printing, observe the following 
precautions.
IMPORTANT
•Do not place any heavy objects on top of the printer or the multi-purpose tray. Doing so 
may damage the printer.
•Do not lave the top cover open for any longer than you need to. Exposure to direct 
sunlight or strong light can degrade the printer performance.
•Do not shake the printer while it is printing. Doing so may reduce the printing quality.
•Do not open the top cover of the printing while it is printing. Doing so may damage the 
printer.
 
						

							Handling the Printer5-48
Routine Maintenance
5
•Open and close the multi-purpose tray, sub-output tray and the top cover of the printer 
gently. The printer may be damaged if you are rough.
•If you want to spread a blanket over the printer to prevent dust from entering the printer, 
turn the power off and allow the printer to cool down sufficiently before covering the 
printer.
•If you do not plan to use the printer for a long period of time, unplug the power cord from 
the AC power outlet.
•Do not use or store the printer in a room where chemicals are used.
Precautions for Storing the Printer
If you do not plan to use the printer for a long period of time, store it in the following 
environment:
•Temperature: from 0 to 35°C (32 to 95°F)
•Humidity: from 35 to 85% RH with no condensation
 
						

							CHAPTER
6-1
6Optional Accessories
This chapter describes the optional accessories and the procedures for installing them on the 
printer.
Optional Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Network Board (AXIS 1611) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-3
Installing the Network Board (AXIS 1611)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12
Verifying the Contents of the Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-13
Parts and Their Functions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-13
Installing the Network Board  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-14
Removing the Network Board  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-19
 
						

							Optional Accessories6-2
Optional Accessories
6
Optional Accessories
The following optional accessories are available to allow you to full utilize the 
features of this printer. Purchase these products as you need them. Contact the 
store where you purchased the printer for inquiries about the optional accessories.
250-sheet Paper Feeder
The 250-sheet paper feeder attaches to the base of the printer. Up to approximately 
250 sheets of plain paper (64 g/m2) in sizes of A4, B5, A5, Legal, Letter, and 
Executive can be loaded in the paper cassette in the optional 250-sheet paper 
feeder (Cassette 1).
Paper Feeder Unit PF-96
 
						

							Optional Accessories6-3
Optional Accessories
6
Network Board (AXIS 1611)
Installing the optional network board (AXIS 1611) allows you to use the LBP5200 
directly over a network.
For more details on the AXIS 1611, visit the Axis Communications website (http://
www.axis.com/).
Network Board (AXIS 1611)
 
						

							Installing the 250-sheet Paper Feeder6-4
Optional Accessories
6
Installing the 250-sheet Paper Feeder
Installation Space
The following figures show the dimensions of each part of the printer, the 
dimensions of the space required around the printer, and the positions of the feet 
when the printer is fitted with the 250-sheet paper feeder.
682758
515.5*2208
100
100
100
1174.5*1
223 99129.5
451482322 7356.5
314 100 66
320.5 93.5 66
(mm)
(mm)
376
•Printer Dimensions • Feet Positions (Paper Feeder)
•Required Peripheral Space
*
1Becomes 1232 mm if you use legal size paper.
*2Becomes 573 mm if you use legal size paper.
 
						

							Installing the 250-sheet Paper Feeder6-5
Optional Accessories
6
Verifying the Contents of the Package
Before installing the 250-sheet paper feeder, make sure that all of the following 
items were present in the package. In the rare event that any components are 
missing or damaged, contact the store where you purchased the feeder.
Installing the 250-sheet Paper Feeder
Attach the 250-sheet paper feeder to the base of the printer using the following 
procedure.
WARNING
Make sure you turn the printer off, disconnect the power plug and remove all 
interface cables and the power cord from the printer before attaching the 
250-sheet paper feeder. If you move the printer without unplugging the cables, 
the electrical cord and interface cables may be damaged, causing a fire or 
electrical shock.
IMPORTANT
•Do not touch the connectors or rollers in the paper feeder. Doing so may damage the 
feeder or cause paper feeding problems.
•Cellophane tape and packing materials are attached to protect the 250-sheet paper 
feeder from vibrations and shocks during transport. Make sure you remove all packing 
material before use.
•Store the packing materials carefully, as you will need them when you transport or repair 
the 250-sheet paper feeder.
Paper Feeder Unit PF-96
Connector
Roller