Canon Lbp 5200 User Guide

							Installing the CAPT Software3-36
Setting Up the Printing Environment
3
15Click [Finish].
Windows will begin copying files.
If you chose to print a test page, a dialog box is displayed after the page finishes 
printing. Click [OK] to close the dialog box.
NOTE
If the [Digital Signature Not Found] dialog box appears, click [Yes].
16If the printer is not connected to the computer, connect it 
using a USB cable and turn the printer on.
This completes the installation of the printer driver.
 
						

							Installing the CAPT Software3-37
Setting Up the Printing Environment
3
For Windows XP/Server 2003
The screen shots shown in this section are taken from Windows XP.
Installing from CD-ROM Setup
1Make sure that the printer is turned off and that the computer 
and printer are not connected by a USB cable.
IMPORTANT
•At some point during the installation procedure (step 11 ➞ p. 3-40) you will need to 
connect the USB cable and turn the printer on.
•If the Plug and Play automatic setup wizard appears, click [Cancel] and install the 
CAPT software using this procedure.
2Turn the computer on and start up Windows XP/Server 2003.
3Log on as a user who is a member of the Administrators 
group.
NOTE
Full Control Permission is required for the installation of the printer driver.
4Insert the supplied LBP5200 User Software CD-ROM into 
the CD-ROM drive.
If the CD-ROM is already in the drive, eject the disk and re-insert it into the drive.
CD-ROM Setup appears automatically.
IMPORTANT
If the CD-ROM Setup program does not start automatically, select [Run] from the 
[Start] menu, enter D:\English\CNAC3MNU.exe, and click the [OK] button. (In this 
case the CD-ROM drive is assumed to be assigned to D:. The actual CD-ROM 
drive letter may be different depending on the computer you are using.)
 
						

							Installing the CAPT Software3-38
Setting Up the Printing Environment
3
5Click [Install].
A dialog box is displayed to confirm the language.
6Check that the language is correct and click [Yes].
After the preparation for installation is complete, the CAPT (Canon Advanced 
Printing Technology) software installer starts up, and the [Setup Wizard] dialog 
box is displayed.
7Click [Next].
The [License Agreement] dialog box is displayed.
 
						

							Installing the CAPT Software3-39
Setting Up the Printing Environment
3
8Check the contents of the agreement and select [I accept the 
terms in the license agreement], and then click [Next].
9Select [Install Printer Driver through a USB Connection], then 
click [Next].
If you are using an operating system equipped with Windows Firewall, such as 
Windows XP Service Pack 2, the following window is displayed. Click [Yes] or 
[No].
Click [Yes] to configure Windows Firewall to unblock communication with client 
computers. Select this option if the computer you are currently installing is a print 
server.
 
						

							Installing the CAPT Software3-40
Setting Up the Printing Environment
3
Click [No] to configure Windows Firewall to block communications with client 
computers.
10The message [Unable to cancel setup after setup is started. 
Are you sure you want to start setup now?] is displayed. Click 
[Yes].
NOTE
If the [Software Installation] dialog box appears, click [Continue Anyway].
11When the following window is displayed, connect the printer 
to the computer with the USB cable and turn the printer on.
Connect the printer to the computer using the USB cable.
 
						

							Installing the CAPT Software3-41
Setting Up the Printing Environment
3
Press the power switch to turn the printer on.
Installation of the USB class driver (supplied with OS) and the printer driver starts 
automatically.
NOTE
•If the computer does not automatically recognize the printer after you connect the 
USB cable, refer to Installation Problems, on p. 7-41.
•If the [Hardware Installation] dialog box appears, click [Continue Anyway].
12Once the installation complete screen is displayed, select 
[Yes, I want to restart my computer now.] and click the [Exit] 
button.
Windows restarts.
This completes the installation of the USB class driver (supplied with OS) and printer 
driver.
 
						

							Installing the CAPT Software3-42
Setting Up the Printing Environment
3
Installing with Plug and Play
IMPORTANT
Before using Plug and Play to install the CAPT software, make sure that the printer is 
properly connected to the computer and that the printer is turned on.
1Turn the computer on and start up Windows XP/Server 2003.
2Log on as a user who is a member of the Administrators 
group.
NOTE
Full Control Permission is required for the installation of the printer driver.
3Insert the LBP5200 User Software CD-ROM into the CD-ROM 
drive. Select [Install from a list or specific location 
(Advanced)], then click [Next].
If CD-ROM Setup appears, click [Exit].
 
						

							Installing the CAPT Software3-43
Setting Up the Printing Environment
3
4Select [Search for the best driver in these locations.] and clear 
the checkmark from [Search removable media (floppy, 
CD-ROM...)], then select [Include this location in the search].
5Click [Browse], then select a folder.
Select [D:\English\Win2K_XP], and then click [OK].
In this case the CD-ROM drive is assumed to be assigned to D:. The actual 
CD-ROM drive letter may be different depending on the computer you are using.
 
						

							Installing the CAPT Software3-44
Setting Up the Printing Environment
3
6Make sure that the correct path is displayed in the [Include 
this location in the search] field, then click [Next].
An installation in progress screen is displayed.
After this, the [Completing the Found New Hardware Wizard] dialog is displayed.
NOTE
If the [Hardware Installation] dialog box appears, click [Continue Anyway].
7Click [Finish].
IMPORTANT
If you are using an operating system equipped with Windows Firewall, such as 
Windows XP Service Pack 2, as a print server, you need to configure Windows 
Firewall to unblock communication with the client computers. (See p. 8-14)
This completes the installation of the USB class driver (supplied with OS) and printer 
driver.
 
						

							Installing the CAPT Software3-45
Setting Up the Printing Environment
3
Installing using the [Add Printer Wizard]
IMPORTANT
If you want to print a test page, make sure that the printer is properly connected to the 
computer and that the printer is turned on before installing the CAPT software.
NOTE
When installing the CAPT software using the [Add Printer Wizard], the USB port that you 
connect the printer to needs to have been setup previously.
1Turn the computer on and start up Windows XP/Server 2003.
IMPORTANT
If the Plug and Play automatic setup wizard appears, click [Cancel] and install the 
CAPT software using this procedure.
2Log on as a user who is a member of the Administrators 
group.
NOTE
Full Control Permission is required for the installation of the printer driver.
3Open the [Printers and Faxes] folder.
For Windows XP Professional/Server 2003:
Select [Printers and Faxes] from the [Start] menu.
For Windows XP Home Edition:
Select [Control Panel] from the [Start] menu, then click [Printers and Other 
Hardware] ➞ [Printers and Faxes].