Canon Ir 2200 User Guide

							Making Prints Using the Stack Bypass1-51
1-511-51 1-51
1
11 1
Before You Star t Using This Machine
Hold down the four corners of the envelopes firmly, so that they  and the sealed or glued portion stay  
flat.
IMPORTANT
•
•• •Do not print on the underside of the envelopes.
•
•• •If the envelopes become filed with air, flatten them by hand before loading them in the envelope 
feeder attachment.
Load the envelopes as shown below.
IMPORTANT
•
•• •When printing data from a personal computer, always load the envelopes as shown above.
Feeding 
Feeding Feeding  Feeding 
Direction
DirectionDirection Direction
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Making Prints Using the Stack Bypass1-52
1-521-52 1-52
1
11 1
Before You Star t Using This Machine
When Saddle Finisher-G1 is attached, and Image Orientation Priority is set to “On,” load the 
envelopes as shown below.
s
4
44 4Select the paper size, and press “Next.”
Select the paper size, and press “Next.”Select the paper size, and press “Next.” Select the paper size, and press “Next.”
If envelopes are loaded, press “Envelopes,” and specify the envelope type. Then press “OK”→  “OK,” 
and proceed to step 6.
When loading paper other than a standard size, press “Free Size.”
To select the inch paper size, press “Inch-size”.
Feeding 
Feeding Feeding  Feeding 
Direction
DirectionDirection Direction
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Making Prints Using the Stack Bypass1-53
1-531-53 1-53
1
11 1
Before You Star t Using This Machine
If the following screen is displayed, adjust the width of the slide guide and set the size.
If the following screen is displayed, adjust the width of the slide guides to the size stored in the Stack 
Bypass Standard Settings, or set the Stack Bypass Standard Settings to “Off.”
IMPORTANT
•
•• •Set the paper size to the same size as the paper loaded in the stack bypass.
•
•• •If Standard Paper for Stack Bypass is set to “On,” you can load only the registered paper types in the 
stack bypass.
•
•• •Designate which envelope type you want to set. If the envelope type is not designated correctly, a 
paper jam will occur.
5
55 5Select the type of paper (Plain, Heavy, etc.), and press “OK.”
Select the type of paper (Plain, Heavy, etc.), and press “OK.”Select the type of paper (Plain, Heavy, etc.), and press “OK.” Select the type of paper (Plain, Heavy, etc.), and press “OK.”
IMPORTANT
•
•• •Select the correct paper type to avoid a paper jam.
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Making Prints Using the Stack Bypass1-54
1-541-54 1-54
1
11 1
Before You Star t Using This Machine
NOTE
•
•• •For details of paper types, see ‘Available Paper Stock,’ on p. 1-61.
6
66 6Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
When you press “Stack Bypass Setting,” you can set the paper size again.
7
77 7Place your originals, and programme the copy settings.
Place your originals, and programme the copy settings.Place your originals, and programme the copy settings. Place your originals, and programme the copy settings.
When printing documents stored in a mail box, this procedure is not necessary.
NOTE
•
•• •When there is no reserved job, continue the procedure from step 2.
8
88 8Press
PressPress Press .
.. .
When printing documents stored in a mail box, press “Start Print.”
Copying starts.
NOTE
•
•• •If heavyweight paper or envelopes are not fed normally from the stack bypass when printing, curl up 
the edge of the paper by about 3 mm before loading it.
•
•• •To cancel all settings and return the machine to the standard mode, press . 
Paper size loaded presently
Paper size loaded presentlyPaper size loaded presently Paper size loaded presently
Paper size selected
Paper size selectedPaper size selected Paper size selected
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Making Prints Using the Stack Bypass1-55
1-551-55 1-55
1
11 1
Before You Star t Using This Machine
Using the Stack Bypass While Reser ving Print Jobs
Using the Stack Bypass While Reser ving Print JobsUsing the Stack Bypass While Reser ving Print Jobs Using the Stack Bypass While Reser ving Print Jobs
While paper is being fed from the stack bypass for the current print job, you can specify the 
paper to be loaded in the stack bypass for the next reserved job.
You can reserve up to five print jobs, including the current job. Interrupt print jobs are not 
included in this count.
The following example assumes that A4 plain paper is being fed from the stack bypass for the 
current job, and that you are reserving A3 plain paper to be fed from the stack bypass for the 
next reserved job
IMPORTANT
•
•• •If Stack Bypass Standard Settings is set to “On,” you can reserve a job only with the registered 
paper types. (See ‘Setting the Standard Paper for the Stack Bypass,’ on p. 3-25.)
1
11 1Press “Stack Bypass Setting” in the Paper Selection screen that appears 
Press “Stack Bypass Setting” in the Paper Selection screen that appears Press “Stack Bypass Setting” in the Paper Selection screen that appears  Press “Stack Bypass Setting” in the Paper Selection screen that appears 
when specifying reser ved pr int settings.
when specifying reser ved pr int settings.when specifying reser ved pr int settings. when specifying reser ved pr int settings.
NOTE
•
•• •When Standard Stack Bypass Settings is set to “On, ”and “Stack Bypass” is selected, the paper 
stored in the Standard Settings is displayed. (See ‘Setting the Standard Paper for the Stack Bypass,’ 
on p. 3-25.)
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Making Prints Using the Stack Bypass1-56
1-561-56 1-56
1
11 1
Before You Star t Using This Machine
2
22 2Select the paper size, and press “Next.”
Select the paper size, and press “Next.”Select the paper size, and press “Next.” Select the paper size, and press “Next.”
NOTE
•
•• •To select free size paper, press “Free Size.”
•
•• •To select envelopes, press “Envelope.”•
•• •To select the inch paper size, press “Inch-size”.•
•• •If Stack Bypass Standard Settings is set to “On,” the screen which shows the paper size/type 
selected beforehand will be displayed.  (See ‘Setting the Standard Paper for the Stack Bypass,’ on 
p. 3-25.)
3
33 3Select the paper type, and press “OK.”
Select the paper type, and press “OK.”Select the paper type, and press “OK.” Select the paper type, and press “OK.”
The paper currently loaded and the paper reserved to be loaded are displayed, as shown in the 
following screen.
Paper size loaded presently
Paper size loaded presentlyPaper size loaded presently Paper size loaded presently Paper size selected
Paper size selectedPaper size selected Paper size selected
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Making Prints Using the Stack Bypass1-57
1-571-57 1-57
1
11 1
Before You Star t Using This Machine
4
44 4Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
This completes the reserved specifications for the originals you plan to set in the feeder.
5
55 5Press
PressPress Press .
.. .
When printing documents stored in a mail box, press “Start Print.”
6
66 6Load the specified paper when its tur n comes to print.
Load the specified paper when its tur n comes to print.Load the specified paper when its tur n comes to print. Load the specified paper when its tur n comes to print.
NOTE
•
•• •The specified paper size is displayed when its turn comes to print.
•
•• •Even when setting reserved print settings, if paper is loaded in the stack bypass, specify the same 
paper size and type as selected in steps 2 and 3. Otherwise, the machine does not start printing.
7
77 7Select the paper size, and press “Next.”
Select the paper size, and press “Next.”Select the paper size, and press “Next.” Select the paper size, and press “Next.”
NOTE
•
•• •To select free size paper, press “Free Size.”
•
•• •To select envelopes, press “Envelope.”•
•• •To select the inch paper size, press “Inch-size”.
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Making Prints Using the Stack Bypass1-58
1-581-58 1-58
1
11 1
Before You Star t Using This Machine
8
88 8Select the paper type, and press “OK.”
Select the paper type, and press “OK.”Select the paper type, and press “OK.” Select the paper type, and press “OK.”
The machine starts printing.
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Multi-function Operation1-59
1-591-59 1-59
Before You Star t Using This Machine
1
11 1
Multi-function Operation
Multi-function OperationMulti-function Operation Multi-function Operation
The iR3300/iR2800/iR2200 is a multi-function machine equipped with such capabilities as Print 
and Fax, in addition to the Copy function. You can operate these functions together (Multi-
function Operation). The following table presents details of multi-function operations.
Previous job CopyMail Box
Next job Scanning data Printing Scanning data Printing
Copy–g–g
Mail boxScanning data –p–p
Printingpg×g
Fa xTX (scanning 
included)–p–p
Memory TXpppp
Memory RXpppp
Printing of 
Auto RX 
Documentspgpg
PrinterReceiving 
datapppp
Printingpgpg
 
						

							Multi-function Operation1-60
1-601-60 1-60
1
11 1
Before You Star t Using This Machine
–: Unavailable due to the duplicate devices
×: Operationally unavailable
g: Available. Automatically resume the next job after performing the previous job.
p: Available
‘TX (scanning included)’ includes a reservation of the direct sending.
Previous job Fax Printer
Next jobScanning 
dataTX RXPrinting of 
Auto RX 
DocumentsReceiving 
dataPrinting
Copy–ppgpg
Mail boxScanning data –ppppp
Printingpppgpg
Fa xTX (scanning 
included)–ppppp
Memory TXpggppp
Memory RXp––ppp
Printing of 
Auto RX 
Documentspppgpg
PrinterReceiving 
datapppp–p
Printingpppgpg