Canon Ir 2200 User Guide
Have a look at the manual Canon Ir 2200 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Inner 2way Tray-A17-73 7-737-73 7-73 Handling Options 7 77 7 Inner 2way Tray-A1 Inner 2way Tray-A1Inner 2way Tray-A1 Inner 2way Tray-A1 If you attach the Inner 2way Tray-A1 to the machine, prints can be delivered to both the Main Tray and the Inner tray. In addition to the Inner 2way Tray-A1, if the Saddle Finisher-G1 is attached to the machine, prints can be delivered to three different locations. IMPORTANT The Inner 2way Tray-A1 is mandatory when attaching the Saddle Finisher-G1. The Inner Tray is necessary when attaching the Inner 2way Tray-A1. When the Inner 2way Tray-A1 is attached without the Copy Tray-F1, do not select Tray C for a designated output tray although the selection is available in the setting screen. When the Finisher-J1 is attached, the Inner 2way Tray-A1 cannot be attached. Par ts and Their Functions Par ts and Their FunctionsPar ts and Their Functions Par ts and Their Functions A AA AInner tray Inner trayInner tray Inner tray Paper is output here. B BB BUpper left cover Upper left coverUpper left cover Upper left cover Open to remove jammed copy paper. (See ‘Clearing Paper Jams in the Inner 2way Tr a y - A 1 ,’ on p. 7-74.) A B
Inner 2way Tray-A17-74 7-747-74 7-74 7 77 7 Handling Options Tray Functions Tray FunctionsTray Functions Tray Functions n Collate Function Collate FunctionCollate Function Collate Function This function automatically collates paper into sets arranged in page order, and outputs them. n Group Function Group FunctionGroup Function Group Function This function outputs all prints of the same page in one set. NOTE When the delivered paper reaches the stacking limit of the tray, printing stops temporarily. After you remove the delivered paper from the tray, the remaining printing restarts. nRotate Function Rotate FunctionRotate Function Rotate Function This function aligns and delivers the copy sets in alternating directions when originals of the same size are copied. Clearing Paper Jams in the Inner 2way Tray-A1 Clearing Paper Jams in the Inner 2way Tray-A1Clearing Paper Jams in the Inner 2way Tray-A1 Clearing Paper Jams in the Inner 2way Tray-A1 If a paper jam occurs in the Inner 2way Tray-A1, a screen similar to the one shown below appears on the touch panel display. Check where the jam occurred, and follow the procedure described below and the procedure that appears on the touch panel display, to remove the jammed paper.
Inner 2way Tray-A17-75 7-757-75 7-75 7 77 7 Handling Options CAUTION CAUTIONCAUTION CAUTION When removing jammed originals or paper, take care not to cut your hands on the edges of When removing jammed originals or paper, take care not to cut your hands on the edges of When removing jammed originals or paper, take care not to cut your hands on the edges of When removing jammed originals or paper, take care not to cut your hands on the edges of the original or paper. the original or paper.the original or paper. the original or paper. When removing jammed paper or when inspecting the inside of the machine, do not allow When removing jammed paper or when inspecting the inside of the machine, do not allow When removing jammed paper or when inspecting the inside of the machine, do not allow When removing jammed paper or when inspecting the inside of the machine, do not allow necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may result in burns or electrical shock. result in burns or electrical shock.result in burns or electrical shock. result in burns or electrical shock. When removing paper which has become jammed inside the machine, take care not to allow When removing paper which has become jammed inside the machine, take care not to allow When removing paper which has become jammed inside the machine, take care not to allow When removing paper which has become jammed inside the machine, take care not to allow the toner on the jammed paper to come into contact with your hands or clothing, as this will the toner on the jammed paper to come into contact with your hands or clothing, as this will the toner on the jammed paper to come into contact with your hands or clothing, as this will the toner on the jammed paper to come into contact with your hands or clothing, as this will dir ty your hands or clothing. If they become dir ty, wash them immediately with cold water. dir ty your hands or clothing. If they become dir ty, wash them immediately with cold water. dir ty your hands or clothing. If they become dir ty, wash them immediately with cold water. dir ty your hands or clothing. If they become dir ty, wash them immediately with cold water. Washing with warm water will set the toner and make it impossible to remove the toner stains. Washing with warm water will set the toner and make it impossible to remove the toner stains.Washing with warm water will set the toner and make it impossible to remove the toner stains. Washing with warm water will set the toner and make it impossible to remove the toner stains. When removing paper which has become jammed inside the machine, remove the jammed When removing paper which has become jammed inside the machine, remove the jammed When removing paper which has become jammed inside the machine, remove the jammed When removing paper which has become jammed inside the machine, remove the jammed paper gently to prevent the toner on the paper from scattering and entering your eyes or paper gently to prevent the toner on the paper from scattering and entering your eyes or paper gently to prevent the toner on the paper from scattering and entering your eyes or paper gently to prevent the toner on the paper from scattering and entering your eyes or mouth. If toner enters your eyes or mouth, wash them immediately with cold water and consult mouth. If toner enters your eyes or mouth, wash them immediately with cold water and consult mouth. If toner enters your eyes or mouth, wash them immediately with cold water and consult mouth. If toner enters your eyes or mouth, wash them immediately with cold water and consult a physician. a physician.a physician. a physician. 1 11 1Move the finisher away from the main unit. Move the finisher away from the main unit. Move the finisher away from the main unit. Move the finisher away from the main unit. When the finisher is not attached, start from step 2. 2 22 2Open the upper left cover of the main unit. Open the upper left cover of the main unit.Open the upper left cover of the main unit. Open the upper left cover of the main unit. IMPORTANT The upper left cover of the main unit cannot be opened any further than the position shown in the illustration above.
Inner 2way Tray-A17-76 7-767-76 7-76 7 77 7 Handling Options 3 33 3Remove visible jammed paper with the left cover open. Remove visible jammed paper with the left cover open.Remove visible jammed paper with the left cover open. Remove visible jammed paper with the left cover open. IMPORTANT When removing the jammed paper, hold the left cover. 4 44 4Remove any jammed paper. Remove any jammed paper.Remove any jammed paper. Remove any jammed paper. 5 55 5Close the upper left cover. Close the upper left cover.Close the upper left cover. Close the upper left cover. When Saddle Finisher-G1 is When Saddle Finisher-G1 is When Saddle Finisher-G1 is When Saddle Finisher-G1 is attached attachedattached attachedWhen Copy Tray-F1 is attached When Copy Tray-F1 is attachedWhen Copy Tray-F1 is attached When Copy Tray-F1 is attached
Inner 2way Tray-A17-77 7-777-77 7-77 7 77 7 Handling Options CAUTION CAUTIONCAUTION CAUTION When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in personal injur y. personal injur y.personal injur y. personal injur y. 6 66 6Connect the finisher to the main unit. Connect the finisher to the main unit.Connect the finisher to the main unit. Connect the finisher to the main unit. When the finisher is not attached, this step is not necessary. CAUTION CAUTIONCAUTION CAUTION When retur ning the finisher to its original position, be careful not to get your fingers caught, as When retur ning the finisher to its original position, be careful not to get your fingers caught, as When retur ning the finisher to its original position, be careful not to get your fingers caught, as When retur ning the finisher to its original position, be careful not to get your fingers caught, as this may result in personal injur y. this may result in personal injur y.this may result in personal injur y. this may result in personal injur y. 7 77 7Follow the instructions on the touch panel display. Follow the instructions on the touch panel display.Follow the instructions on the touch panel display. Follow the instructions on the touch panel display. NOTE For details of the screen indicating how to remove the paper jam, see ‘Screen Shown When There Is a Paper Jam,’ on p. 6-2.
Copy Tray-F17-78 7-787-78 7-78 Handling Options 7 77 7 Copy Tray-F1 Copy Tray-F1Copy Tray-F1 Copy Tray-F1 When the Copy Tray-F1 is attached to the machine, the following functions are available: Collate mode Group mode Rotate mode IMPORTANT The Copy Tray-F1 can be attached together with the Inner 2way Tray-A1 without the Saddle Finisher-G1. Par ts and Their Functions Par ts and Their FunctionsPar ts and Their Functions Par ts and Their Functions NOTE Open the auxiliary tray when copying on large-size paper. A AA ACopy tray Copy trayCopy tray Copy tray Paper is output here. A
Card Reader-C17-79 7-797-79 7-79 Handling Options 7 77 7 Card Reader-C1 Card Reader-C1Card Reader-C1 Card Reader-C1 When the Card Reader-C1 (option) is attached to the machine, you must insert a control card before operating this machine. Then the Department ID management is automatically performed. NOTE If the Basic Features screen does not appear on the touch panel display even when the control card is inserted, make sure that: - The control card is inserted in the correct direction. - The control card is inserted as far as it can go. - An unusable control card is not inserted. (For example, cards which are damaged, already used to the set limit, or not allowable.) Insert a usable control card correctly. For details of how to turn the power on, see ‘Main Power and Control Panel Power,’ on p. 1-24. When the Card Reader-C1 (option) is attached, the types of cards shown below can be used. An optical type card can manage up to 200 departments, and an magnetic type card, up to 3,000 departments. However, the maximum number of departments managed depends on the main unit. The iR3300/iR2800/iR2200 series machines enable you to manage maximum 300 departments,i.e., 200 departments with an optical type card, and 300 departments with an magnetic type card. CONTROL CARD 1 2 3 CONTROL CARDIII 001 1 2 3 Magnetic type card Magnetic type cardMagnetic type card Magnetic type card Optical type card Optical type cardOptical type card Optical type card
Card Reader-C17-80 7-807-80 7-80 7 77 7 Handling Options Operations Before Using Copy, Fax, or Mail Box Operations Before Using Copy, Fax, or Mail Box Operations Before Using Copy, Fax, or Mail Box Operations Before Using Copy, Fax, or Mail Box Functions FunctionsFunctions Functions 1 11 1Inser t the control card into the card slot, making sure it is facing in the Inser t the control card into the card slot, making sure it is facing in the Inser t the control card into the card slot, making sure it is facing in the Inser t the control card into the card slot, making sure it is facing in the correct direction. correct direction.correct direction. correct direction. The Basic Features screen of the selected function appears on the touch panel display. Operations After Using Copy, Fax, or Mail Box Operations After Using Copy, Fax, or Mail Box Operations After Using Copy, Fax, or Mail Box Operations After Using Copy, Fax, or Mail Box Functions FunctionsFunctions Functions 1 11 1After you finish using the machine, remove the control card. After you finish using the machine, remove the control card.After you finish using the machine, remove the control card. After you finish using the machine, remove the control card.
Card Reader-C17-81 7-817-81 7-81 7 77 7 Handling Options The touch panel display returns to the screen for inserting the control card. Depar tment ID Management When Using the Depar tment ID Management When Using the Depar tment ID Management When Using the Depar tment ID Management When Using the Control Card Control CardControl Card Control Card This section describes how to change the password and Impression Limit, and how to check the print totals, when the control card is being used. The maximum number of digits you can store for the department ID and password is seven. If you store them with less than seven, the machine stores them as follows: - Example: when is entered → is stored. The maximum number of digits you can store for the Impression Limit is six. The default setting is “Off.” Changing the Password and Impression Limit Changing the Password and Impression LimitChanging the Password and Impression Limit Changing the Password and Impression Limit 1 11 1Call up the desired screen as follows: Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows: When the System Manager ID/Password is set, enter the System Manager ID and System Password after pressing “System Settings.” Then, press (ID).
Card Reader-C17-82 7-827-82 7-82 7 77 7 Handling Options 2 22 2Press “Store Dept. ID/Password.” Press “Store Dept. ID/Password.” Press “Store Dept. ID/Password.” Press “Store Dept. ID/Password.” 3 33 3Select the password you want to change, and press “Edit.” Select the password you want to change, and press “Edit.” Select the password you want to change, and press “Edit.” Select the password you want to change, and press “Edit.” 4 44 4Enter the password ID with Enter the password ID withEnter the password ID with Enter the password ID with - -- - (numeric keys), and press “OK.” (numeric keys), and press “OK.” (numeric keys), and press “OK.” (numeric keys), and press “OK.” To change the Impression Limit, press “Impression Limit” → enter the number with - (numeric keys) → press “OK.” You cannot store a password with only the number , such as . NOTE You cannot change the Department ID.