Canon Ir 2200 User Guide

							Setting Specifications That Are Common to Each Function (Common Settings)3-31
3-313-31 3-31
3
33 3
Selecting and Storing Settings to Suit your Needs
Retur ning the Common Settings to Their Defaults
Retur ning the Common Settings to Their DefaultsRetur ning the Common Settings to Their Defaults Retur ning the Common Settings to Their Defaults
With this function you can return the common settings to their defaults (initial settings).
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
2
22 2Select “Yes.”
Select “Yes.”Select “Yes.” Select “Yes.”
To cancel initialisation, select “No.”
The screen shown below is displayed for about two seconds.
3
33 3Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Setting the Timer (Timer Settings)3-32
3-323-32 3-32
Selecting and Storing Settings to Suit your Needs
3
33 3
Setting the Timer
Setting the TimerSetting the Timer Setting the Timer (Timer Settings)
 (Timer Settings) (Timer Settings)  (Timer Settings)
You can set the current date and time, and specify the time taken for the machine to enter the 
Sleep mode.
NOTE
•
•• •The Timer Settings screen is made up of several screens. Use “ t” or “s” to scroll to the desired 
screen and make the required settings. 
•
•• •When “ t” or “s” should be pressed, the indication   is displayed in this manual.
Setting the Current Date and Time
Setting the Current Date and TimeSetting the Current Date and Time Setting the Current Date and Time
You can set the current date and time. The date and time set here is also used as the time 
setting when required for functions.
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
- GMT : The time at the Greenwich Observatory in England is called GMT 
(Greenwich Mean Time).
- Time Zone : The standard time zones of the world are expressed globally in terms 
of the difference in hours (± up to 12 hours) from GMT (± 0 hours). A 
time zone is a region throughout which this time difference is the 
same.
- Daylight Saving Time : In some countries, time is advanced throughout the summer season. 
The period in which this is applied is called .
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Setting the Timer (Timer Settings)3-33
3-333-33 3-33
3
33 3
Selecting and Storing Settings to Suit your Needs
2
22 2Enter the current date (day, month, y ear) and time with
Enter the current date (day, month, y ear) and time withEnter the current date (day, month, y ear) and time with Enter the current date (day, month, y ear) and time with

(numeric keys).
(numeric keys).(numeric keys). (numeric keys).
Enter the date, and the time in 24-hour clock as four digits without a space.
Enter all four digits for the year ranging from 2000 to 2038.
Examples: MAY 6.→ 0605
 7:05 a.m.→ 0705
11:18 p.m.→ 2318
NOTE
•
•• •If you make a mistake when entering values, press , and enter the values again.
l
When setting the Time Zone Settings:
When setting the Time Zone Settings:When setting the Time Zone Settings: When setting the Time Zone Settings:
Press “Time Zone Settings,” and select the time zone where the machine is located, and press “OK.”
NOTE
•
•• •The default setting is “GMT 0:00.”
Press “ t” or “s” to scroll the list.
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Setting the Timer (Timer Settings)3-34
3-343-34 3-34
3
33 3
Selecting and Storing Settings to Suit your Needs
lWhen setting the Daylight Saving Time Settings:
When setting the Daylight Saving Time Settings:When setting the Daylight Saving Time Settings: When setting the Daylight Saving Time Settings:
Press “Daylight Saving Time Settings” → press “On” → press “Start Date.”
Select “Month” →  “Day” to specify each of them.
Enter the time using “–” and “+,” and press “OK.”
Press “End Date” and make the settings in the same way as the above.
NOTE
•
•• •When you make the Daylight Saving Time settings, the machine automatically sets the standard 
time of the machine one-hour forward at the specified date and time.
•
•• •The default setting is “On.”•
•• •You can also set the time with - (numeric keys).•
•• •The time can be set from 0 to 23 (in one-hour increments).
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Setting the Timer (Timer Settings)3-35
3-353-35 3-35
3
33 3
Selecting and Storing Settings to Suit your Needs
3
33 3Press “OK.”
Press “OK.”Press “OK.” Press “OK.”
4
44 4Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Setting the Time Taken to Initiate Auto Sleep After 
Setting the Time Taken to Initiate Auto Sleep After Setting the Time Taken to Initiate Auto Sleep After  Setting the Time Taken to Initiate Auto Sleep After 
Finishing Operations
Finishing OperationsFinishing Operations Finishing Operations
If the machine is not operated (no keys are pressed) for a certain period of time, the control 
panel power switch automatically switches OFF to save power. The machine then enters the 
Sleep mode.
NOTE
•
•• •The default setting is “2 minutes.”
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Setting the Timer (Timer Settings)3-36
3-363-36 3-36
3
33 3
Selecting and Storing Settings to Suit your Needs
2
22 2Enter the desired Auto Sleep Time with “
Enter the desired Auto Sleep Time with “Enter the desired Auto Sleep Time with “ Enter the desired Auto Sleep Time with “t” or “
” or “” or “ ” or “s,” and press “OK.”
,” and press “OK.”,” and press “OK.” ,” and press “OK.”
The Auto Sleep Time settings are 10 seconds, 1, 2, 10, 15, 20, 30, 40, 50 minutes, 1 hour, 90 minutes, 
2, 3, and 4 hours.
3
33 3Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Setting the Timer (Timer Settings)3-37
3-373-37 3-37
3
33 3
Selecting and Storing Settings to Suit your Needs
Setting the Time Taken for the Display to Retur n to 
Setting the Time Taken for the Display to Retur n to Setting the Time Taken for the Display to Retur n to  Setting the Time Taken for the Display to Retur n to 
the Basic Features Screen After Finishing Operations
the Basic Features Screen After Finishing Operationsthe Basic Features Screen After Finishing Operations the Basic Features Screen After Finishing Operations
If the machine is not operated (no keys are pressed) for a certain period of time, the display 
returns to the Basic Features screen (standard setting) of the selected function.
This period of time is called “Auto Clear Time.” Auto Clear Time can be set from 1 to 9 minutes in 
one-minute increments, and can also be set to “Off.”
NOTE
•
•• •The default setting is “2 minutes.”
•
•• •When “0” is selected, the Auto Clear function is not set.
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
2
22 2Enter the desired time period using “–” or “+,” and press “OK.”
Enter the desired time period using “–” or “+,” and press “OK.”Enter the desired time period using “–” or “+,” and press “OK.” Enter the desired time period using “–” or “+,” and press “OK.”
The Auto Clear Time settings are from 0 to 9 minutes (in one-minute increments).
You can also enter values using 

(numeric keys).
3
33 3Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Setting the Timer (Timer Settings)3-38
3-383-38 3-38
3
33 3
Selecting and Storing Settings to Suit your Needs
Setting the Time Taken for the Unit to Quiet Down 
Setting the Time Taken for the Unit to Quiet Down Setting the Time Taken for the Unit to Quiet Down  Setting the Time Taken for the Unit to Quiet Down 
After the Last Task 
After the Last Task After the Last Task  After the Last Task 
This machine enters the Quiet mode after a specified amount of time has elapsed following a 
print job or after a key has been pressed. On this screen you can specify the amount of time that 
must be taken before entering the Quiet mode.
NOTE
•
•• •The default setting is “1 minute.”
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
2
22 2Enter the desired time period with “–” or “+,” and press “OK.”
Enter the desired time period with “–” or “+,” and press “OK.”Enter the desired time period with “–” or “+,” and press “OK.” Enter the desired time period with “–” or “+,” and press “OK.”
The Time Until Unit Quiets Down settings are from 0 to 9 minutes (in one-minute increments).
You can also enter values using

(numeric keys).
3
33 3Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Setting the Timer (Timer Settings)3-39
3-393-39 3-39
3
33 3
Selecting and Storing Settings to Suit your Needs
Setting the Time that the Unit’s Power Turns Off on 
Setting the Time that the Unit’s Power Turns Off on Setting the Time that the Unit’s Power Turns Off on  Setting the Time that the Unit’s Power Turns Off on 
Different Days of the Week
Different Days of the WeekDifferent Days of the Week Different Days of the Week
You can set the time that the machine automatically turns off for each day of the week.
NOTE
•
•• •Setting range: Daily from Sunday to Saturday, 00:00 to 23:59 in one-minute increments
•
•• •When Auto Clear Time and Daily Timer are both set, Auto Clear Time has priority.
•
•• •The default setting is “No setting.”
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
2
22 2Select the day of the week
Select the day of the weekSelect the day of the week Select the day of the week → enter the time with 
enter the time with enter the time with  enter the time with 
(numeric keys)
(numeric keys)(numeric keys) (numeric keys) → 
press “OK.”
press “OK.”press “OK.” press “OK.”
Enter the time in 24-hour clock as four digits without a space.
Examples:  7:05 a.m.→ 0705
11:18 p.m.→ 2318
If you make a mistake when entering the time, choose the day of the week again, and enter the four-
digit number.
If you do not want to specify the time, press .
3
33 3Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Adjusting the Machine (Adjustment/Cleaning)3-40
3-403-40 3-40
Selecting and Storing Settings to Suit your Needs
3
33 3
Adjusting the Machine 
Adjusting the Machine Adjusting the Machine  Adjusting the Machine (Adjustment/Cleaning)
(Adjustment/Cleaning)(Adjustment/Cleaning) (Adjustment/Cleaning)
You can perform a fine adjustment of the print image and the saddle stitch position.
NOTE
•
•• •The Adjustment/Cleaning screen is made up of several screens. Use “ t” or “s” to scroll to the 
desired screen and make the required settings.
•
•• •When “ t” or “s” should be pressed, the indication   is displayed in this manual.
Fine-adjusting the Zoom When Differences in 
Fine-adjusting the Zoom When Differences in Fine-adjusting the Zoom When Differences in  Fine-adjusting the Zoom When Differences in 
Original Image and Print Image Occur
Original Image and Print Image OccurOriginal Image and Print Image Occur Original Image and Print Image Occur
When you print a copy or a document in a mail box, and a slight difference occurs between the 
size of the original image and the size of the print image, you can perform a fine adjustment with 
this function to reduce this print image error.
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
2
22 2Press “–” or “+” to adjust the percentage (%), and press “OK.”
Press “–” or “+” to adjust the percentage (%), and press “OK.”Press “–” or “+” to adjust the percentage (%), and press “OK.” Press “–” or “+” to adjust the percentage (%), and press “OK.”
The adjustment range for both the X (left-right direction) and the Y (up-down direction) is from –1.0% 
to +1.0% in 0.1% increments.
;ownloadedyfromyXanuals'rinterScomyXanuals