Canon Ir 2200 User Guide
Have a look at the manual Canon Ir 2200 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-63 7-637-63 7-63 7 77 7 Handling Options 12 1212 12Close the front cover of the finisher. Close the front cover of the finisher.Close the front cover of the finisher. Close the front cover of the finisher. CAUTION CAUTIONCAUTION CAUTION When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in personal injur y. personal injur y.personal injur y. personal injur y. NOTE When you close the cover, the stapler unit automatically performs a “dry” stapling operation several times to reposition the staples. Replacing the Staple Case in the Stapler Unit Replacing the Staple Case in the Stapler UnitReplacing the Staple Case in the Stapler Unit Replacing the Staple Case in the Stapler Unit When the finisher is almost out of staples and the staple case must be replaced, a display similar to the one shown below appears on the touch panel display. Follow the procedure described below to replace the staple case.
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-64 7-647-64 7-64 7 77 7 Handling Options 1 11 1Open the front cover of the finisher. Open the front cover of the finisher.Open the front cover of the finisher. Open the front cover of the finisher. 2 22 2Pull out the stapler unit. Pull out the stapler unit.Pull out the stapler unit. Pull out the stapler unit. 3 33 3Lift and pull out the staple car tridge, holding it by its left and right sides. Lift and pull out the staple car tridge, holding it by its left and right sides.Lift and pull out the staple car tridge, holding it by its left and right sides. Lift and pull out the staple car tridge, holding it by its left and right sides.
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-65 7-657-65 7-65 7 77 7 Handling Options 4 44 4Pull out the empty staple case, by pushing the area indicated by . Pull out the empty staple case, by pushing the area indicated by .Pull out the empty staple case, by pushing the area indicated by . Pull out the empty staple case, by pushing the area indicated by . Place the staple cartridge, as shown below, then pull out the staple case. 5 55 5Inser t the new staple case. Inser t the new staple case.Inser t the new staple case. Inser t the new staple case. IMPORTANT Use only the special staple case intended for use with this machine. NOTE Only one staple case can be inserted at a time. PUSH PUSHPUSH
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-66 7-667-66 7-66 7 77 7 Handling Options 6 66 6Remove the seal fixing the staples, by pulling it straight out. Remove the seal fixing the staples, by pulling it straight out.Remove the seal fixing the staples, by pulling it straight out. Remove the seal fixing the staples, by pulling it straight out. 7 77 7Push the staple car tridge back firmly into the finisher. Push the staple car tridge back firmly into the finisher.Push the staple car tridge back firmly into the finisher. Push the staple car tridge back firmly into the finisher. 8 88 8Make sure that the staple car tridge is firmly secured, and return the stapler Make sure that the staple car tridge is firmly secured, and return the stapler Make sure that the staple car tridge is firmly secured, and return the stapler Make sure that the staple car tridge is firmly secured, and return the stapler unit to its original position. unit to its original position.unit to its original position. unit to its original position. Push the stapler unit until it is locked. PUSH
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-67 7-677-67 7-67 7 77 7 Handling Options 9 99 9Close the front cover of the finisher. Close the front cover of the finisher.Close the front cover of the finisher. Close the front cover of the finisher. CAUTION CAUTIONCAUTION CAUTION When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in personal injur y. personal injur y.personal injur y. personal injur y. Clearing Paper Jams in the Puncher Unit Clearing Paper Jams in the Puncher UnitClearing Paper Jams in the Puncher Unit Clearing Paper Jams in the Puncher Unit If a paper jam occurs in the puncher unit, a screen similar to the one below appears on the touch panel display. Follow the procedure described below and on the touch panel display, to remove any jammed paper.
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-68 7-687-68 7-68 7 77 7 Handling Options CAUTION CAUTIONCAUTION CAUTION When removing jammed originals or paper, take care not to cut your hands on the edges of When removing jammed originals or paper, take care not to cut your hands on the edges of When removing jammed originals or paper, take care not to cut your hands on the edges of When removing jammed originals or paper, take care not to cut your hands on the edges of the original or paper. the original or paper.the original or paper. the original or paper. When removing jammed paper or when inspecting the inside of the machine, do not allow When removing jammed paper or when inspecting the inside of the machine, do not allow When removing jammed paper or when inspecting the inside of the machine, do not allow When removing jammed paper or when inspecting the inside of the machine, do not allow necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may result in burns or electrical shock. result in burns or electrical shock.result in burns or electrical shock. result in burns or electrical shock. When removing paper which has become jammed inside the machine, take care not to allow When removing paper which has become jammed inside the machine, take care not to allow When removing paper which has become jammed inside the machine, take care not to allow When removing paper which has become jammed inside the machine, take care not to allow the toner on the jammed paper to come into contact with your hands or clothing, as this will the toner on the jammed paper to come into contact with your hands or clothing, as this will the toner on the jammed paper to come into contact with your hands or clothing, as this will the toner on the jammed paper to come into contact with your hands or clothing, as this will dir ty your hands or clothing. If they become dir ty, wash them immediately with cold water. dir ty your hands or clothing. If they become dir ty, wash them immediately with cold water. dir ty your hands or clothing. If they become dir ty, wash them immediately with cold water. dir ty your hands or clothing. If they become dir ty, wash them immediately with cold water. Washing with warm water will set the toner and make it impossible to remove the toner stains. Washing with warm water will set the toner and make it impossible to remove the toner stains.Washing with warm water will set the toner and make it impossible to remove the toner stains. Washing with warm water will set the toner and make it impossible to remove the toner stains. When removing paper which has become jammed inside the machine, remove the jammed When removing paper which has become jammed inside the machine, remove the jammed When removing paper which has become jammed inside the machine, remove the jammed When removing paper which has become jammed inside the machine, remove the jammed paper gently to prevent the toner on the paper from scattering and entering your eyes or paper gently to prevent the toner on the paper from scattering and entering your eyes or paper gently to prevent the toner on the paper from scattering and entering your eyes or paper gently to prevent the toner on the paper from scattering and entering your eyes or mouth. If toner enters your eyes or mouth, wash them immediately with cold water and consult mouth. If toner enters your eyes or mouth, wash them immediately with cold water and consult mouth. If toner enters your eyes or mouth, wash them immediately with cold water and consult mouth. If toner enters your eyes or mouth, wash them immediately with cold water and consult a physician. a physician.a physician. a physician. NOTE This procedure is only required when the Puncher Unit-J1 and Puncher Unit-G1 and are attached. 1 11 1Move the finisher away from the main unit. Move the finisher away from the main unit.Move the finisher away from the main unit. Move the finisher away from the main unit.
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-69 7-697-69 7-69 7 77 7 Handling Options 2 22 2Move the knob into the position (arrow showing), within the area shown in Move the knob into the position (arrow showing), within the area shown in Move the knob into the position (arrow showing), within the area shown in Move the knob into the position (arrow showing), within the area shown in the figure. the figure.the figure. the figure. 3 33 3Open the top cover, and remove any jammed paper. Open the top cover, and remove any jammed paper.Open the top cover, and remove any jammed paper. Open the top cover, and remove any jammed paper. 4 44 4Close the top cover of the finisher. Close the top cover of the finisher.Close the top cover of the finisher. Close the top cover of the finisher. CAUTION CAUTIONCAUTION CAUTION When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in personal injur y. personal injur y.personal injur y. personal injur y.
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-70 7-707-70 7-70 7 77 7 Handling Options 5 55 5Connect the finisher to the main unit. Connect the finisher to the main unit.Connect the finisher to the main unit. Connect the finisher to the main unit. CAUTION CAUTIONCAUTION CAUTION When retur ning the finisher to its original position, be careful not to get your fingers caught, as When retur ning the finisher to its original position, be careful not to get your fingers caught, as When retur ning the finisher to its original position, be careful not to get your fingers caught, as When retur ning the finisher to its original position, be careful not to get your fingers caught, as this may result in personal injur y. this may result in personal injur y.this may result in personal injur y. this may result in personal injur y. 6 66 6Follow the instructions on the touch panel display. Follow the instructions on the touch panel display.Follow the instructions on the touch panel display. Follow the instructions on the touch panel display. NOTE For details of the screen indicating how to clear the paper jam, see ‘Screen Shown When There Is a Paper Jam,’ on p. 6-2. Removing Punch Waste Removing Punch WasteRemoving Punch Waste Removing Punch Waste When the punch waste tray becomes full, a screen similar to the one shown below appears on the touch panel display. Follow the procedure described below, to remove the punch waste. NOTE This procedure is only required when the Puncher Unit-J1 and Puncher Unit-G1 are attached.
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-71 7-717-71 7-71 7 77 7 Handling Options 1 11 1Move the finisher away from the main unit. Move the finisher away from the main unit.Move the finisher away from the main unit. Move the finisher away from the main unit. 2 22 2Pull out the punch waste tray. Pull out the punch waste tray.Pull out the punch waste tray. Pull out the punch waste tray. 3 33 3Discard the punch waste. Discard the punch waste.Discard the punch waste. Discard the punch waste.
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-72 7-727-72 7-72 7 77 7 Handling Options 4 44 4Retur n the punch waste tray to its or iginal position. Retur n the punch waste tray to its or iginal position.Retur n the punch waste tray to its or iginal position. Retur n the punch waste tray to its or iginal position. NOTE If the tray is not returned securely in place, you cannot make prints with the Hole Punch mode selected. 5 55 5Connect the finisher to the main unit. Connect the finisher to the main unit.Connect the finisher to the main unit. Connect the finisher to the main unit. CAUTION CAUTIONCAUTION CAUTION When retur ning the finisher to its original position, be careful not to get your fingers caught, as When retur ning the finisher to its original position, be careful not to get your fingers caught, as When retur ning the finisher to its original position, be careful not to get your fingers caught, as When retur ning the finisher to its original position, be careful not to get your fingers caught, as this may result in personal injur y. this may result in personal injur y.this may result in personal injur y. this may result in personal injur y. Consumables ConsumablesConsumables Consumables Use only the staple cases recommended for use on this machine. NOTE We recommend that you order staple cases from your service representative before the machine runs out of them.